HE04148: Wall Thickness Analysis icon is not available

APAR status

• Closed as documentation error.

Error description

• Scenario:
  1. Open CATIA with the following licenses:
       MD2 + FR1 + HA1 + TG1
  2.  Open the Part Design workbench.
  3.  Check the Analysis toolbar.
  Problem:
  The wall thickness icon does not appear.
  Expected Result:
  The wall thickness icon should appear.
  Reported on: R20SP04
  Reproduced on: R20SP04 and above levels.
  Regression: No
  Scenario:
  Online documentation states that:
  CFO or FMP or (FR1 and TG1 and HA1) applications are required to
   access the Wall Thickness Analysis  capability.
  When the combination > MD2+FR1+HA1+TG1 is taken then the wall th
  ickness icon does not appear in the analysis toolbar.
  Additional Information:
  1.  Please refer to the customer PPT attached.
  2.  BE reproduced the case without the variable in the ENV file;
   only the appropriate license
       combination.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Open CATIA with the following licenses:
       MD2 + FR1 + HA1 + TG1
  2.  Open the Part Design workbench.
  3.  Check the Analysis toolbar.
  Problem:
  The wall thickness icon does not appear.
  Expected Result:
  The wall thickness icon should appear.
  Reported on: R20SP04
  Reproduced on: R20SP04 and above levels.
  Regression: No
  Scenario:
  Online documentation states that:
  CFO or FMP or (FR1 and TG1 and HA1) applications are required
  to access the Wall Thickness Analysis  capability.
  When the combination > MD2+FR1+HA1+TG1 is taken then the wall
  thickness icon does not appear in the analysis toolbar.
  Additional Information:
  1.  Please refer to the customer PPT attached.
  2.  BE reproduced the case without the variable in the ENV
  file; only the appropriate license
       combination.
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN THE DOCUMENTATION
  DELIVERED WITH CATIA VERSION V5R21
  Additional Closure Information:
  Manual Reference:
  Cast & Forged Part Optimizer
  Chapter: Other or (if Other): User Tasks
  Topic: Analyzing Wall Thicknesses
  Documentation after correction :
  The documentation is modified as below:
  The CFO or FMP application is required to access the Wall
  Thickness
  Analysis  capability. It can also be accessible through CCV
  workbench, in this case, CCV, FR1, TG1, and HA1 applications
  are
  required. The CFO or FMP or CCV application is required to
  update
  and edit the wall thickness analysis features.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels