HE01117: ATTRIBUTE CUTANGLE IS NOT RETRIEVED FOR REFERENCE NAME

APAR status

• Closed as program error.

Error description

• Scenario:
  1. Start CATIA V5 R19SP5 and modify the Piping Naming Rules
  as follows:
      a. Open the CATPipingSample.CATfct and select the Elbow
  feature
      b. Modify the instance naming (add attribute CutAngle at
  the end)
      c. Modify reference naming (add attribute CutAngle at the
  end)
  2. Route a run with at least three point and one angle
  3. Place an elbow on the angle
  Concern: The Instance Name contains the CutAngle value
  however, the Reference Name does not have the CutAngle value.
  Expected Result: The Instance and the Reference Name both
  should have the Modified Attribute value
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Start CATIA V5 R19SP5 and modify the Piping Naming Rules
  as follows:
      a. Open the CATPipingSample.CATfct and select the Elbow
  feature
      b. Modify the instance naming (add attribute CutAngle at
  the end)
      c. Modify reference naming (add attribute CutAngle at the
  end)
  2. Route a run with at least three point and one angle
  3. Place an elbow on the angle
  Concern: The Instance Name contains the CutAngle value
  however, the Reference Name does not have the CutAngle value.
  Expected Result: The Instance and the Reference Name both
  should have the Modified Attribute value
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON Virtual Design  VERSION V5R21
  GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP5.
  Additional Closure Information:
  Technical explanation of the defect:
  The generated part number was not exactly following the xml
  schema definition.
  Technical explanation of the correction: Code has been
  modified so that the part number is
  generated as per xml schema definition.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R520 PSN

     UP