HD96174: CATIA PIPING: PROBLEM WHEN SELECTING A DOCUMENT FROM SMARTEAM IN THE SCHEMATIC BROWSER

APAR status

• Closed as program error.

Error description

• CATIA V5 - SmarTeam integration issue.
  .
  Prerequisites:
  In CATIA: tools / options / equipment and systems / Design
  Criteria / 3D Design : Schematic Driven is checked
  tools / options / General / Document / Document Environment :
  SmarTeam is current
  .
  Scenario
  1/ Start CATIA V5. Connect to SmarTeam
  2/ Go to equipment /piping / piping and instrumentation
  diagrams
  3/ click on OK for the document creation
  4/ route a piping line
  5/ place a component like a pump
  6/ save to smarteam the product
  7/ Close CATIA
  8/ Restart CATIA and connect to SmarTeam
  6/ go to equipment / piping / piping design
  7/ route a run
  ==> the SchematicBrowser window opens
  8/ click on the browse icon (open schematic diagram)
  9/ search in SmarTeam the targeted Product
  10/ select it and click on OK
  ==> In CATIA, it is not inserted.
  11/ Repeat steps 8 and 9
  ==> It is now inserted properly
  Expected behavior : It should work at the first try, not at
  the second try.
  

Local fix

• empty
  

Problem summary

• CATIA V5 - SmarTeam integration issue.
  .
  Prerequisites:
  In CATIA: tools / options / equipment and systems / Design
  Criteria / 3D Design : Schematic Driven is checked
  tools / options / General / Document / Document Environment :
  SmarTeam is current
  .
  Scenario
  1/ Start CATIA V5. Connect to SmarTeam
  2/ Go to equipment /piping / piping and instrumentation
  diagrams
  3/ click on OK for the document creation
  4/ route a piping line
  5/ place a component like a pump
  6/ save to smarteam the product
  7/ Close CATIA
  8/ Restart CATIA and connect to SmarTeam
  6/ go to equipment / piping / piping design
  7/ route a run
  ==> the SchematicBrowser window opens
  8/ click on the browse icon (open schematic diagram)
  9/ search in SmarTeam the targeted Product
  10/ select it and click on OK
  ==> In CATIA, it is not inserted.
  11/ Repeat steps 8 and 9
  ==> It is now inserted properly
  Expected behavior : It should work at the first try, not at
  the second try.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 21 GA
  level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON CATIA V5R20SP3.
  Additional Closure Information:
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN SP52003

     UP10/08/20 I 1000