HD86784: PD: SWITCHING BETWEEN DIFFERENT WINDOWS USING CATIA CTRL AND TA B DOES NOT WORK CORRECTLY

APAR status

• Closed as unreproducible in next release.

Error description

• SCENARIO:
  1. Launch CATIA
  2. Create a new part
  3. Create a new draw
  4. Create a new product
  5. Switch from each window with the ctrl + tab
  keys ==> the workbench tools are not changing.
  This is problem.
  .
  EXPECTED RESULT:
  Switch from each window with the ctrl + tab keys
  the workbench tools should be changed correctly.
  .
  

Local fix

Problem summary

• PD: Switching between different windows using CATIA Ctrl and Ta
  b does not work correctly
  SCENARIO:
  1. Launch CATIA
  2. Create a new part
  3. Create a new draw
  4. Create a new product
  5. Switch from each window with the ctrl + tab
  keys ==> the workbench tools are not changing.
  This is problem.
  .
  EXPECTED RESULT:
  Switch from each window with the ctrl + tab keys
  the workbench tools should be changed correctly.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  VERSION 5 RELEASE 20 GA LEVEL.
  AND ON V5R19SP06
  .
  Incident Diagnosis:
  The workbench icons are not correctly displayed
  when window is changed with ctrl+tab.
  .
  Reason:
  The problem is not reproducible on above
  mentioned levels. On above mentioned levels the
  workbench icons are correctly displayed when
  window is changed with ctrl+tab.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R519 PSN

     UP