HD82220: COMPO DESIGN / CATIA MATERIAL LIBRARY SHOWN AS BROKEN/MISSING A FTER LOADING

APAR status

• Closed as program error.

Error description

• Compo Design / CATIA Material Library Shown as
  Broken/Missing after loading
  .
  Scenario.
  .
  Compo Design / CATIA Material Library Shown as
  Broken/Missing after loading
  .
  1) Open the CATPart
  2) Click Composites Parameters Icon
  3) Click "Add Materials" > ". . . " >
  "Cancel" > "Loaded Document"
  4) Select the "CATMaterial document that was
  loaded/sent from ENOVIA
  (Searched under "Revision"),Then OK
  5) Select any material from list, then click OK, and
  once again click OK
  Result:
  Composites Parameters icon shows a red
  Broken/Missing symbol in bottom left hand corner.
  Click "Edit > Links"; Status for material shows as
  No status
  .
  Expected Results:
  Icon should show a green dot for OK.
  When clicking Edit > Links; Status for material
  should show as OK and point to ENOVIA
  documentation.
  .
  

Local fix

Problem summary

• Compo Design / CATIA Material Library Shown as Broken/Missing a
  fter loading
  Compo Design / CATIA Material Library Shown as
  Broken/Missing after loading
  .
  Scenario.
  .
  Compo Design / CATIA Material Library Shown as
  Broken/Missing after loading
  .
  1) Open the CATPart
  2) Click Composites Parameters Icon
  3) Click "Add Materials" > ". . . " >
  "Cancel" > "Loaded Document"
  4) Select the "CATMaterial document that was
  loaded/sent from ENOVIA
  (Searched under "Revision"),Then OK
  5) Select any material from list, then click OK, and
  once again click OK
  Result:
  Composites Parameters icon shows a red
  Broken/Missing symbol in bottom left hand corner.
  Click "Edit > Links"; Status for material shows as
  No status
  .
  Expected Results:
  Icon should show a green dot for OK.
  When clicking Edit > Links; Status for material
  should show as OK and point to ENOVIA
  documentation.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP04
  Incident Diagnosis
  CATIA Material Library is shown as Broken/Missing
  after loading
  .
  Correction Explanation
  Issue is fixed and scenario is working fine now.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51904

     UP09/05/06 I 1000