HD72573: DRAFTING (INTDRAFT) / WRONG REPRESENTATION OF THE FONT SIZE FRO M TOOLS > STANDARDS.

APAR status

• Closed as program error.

Error description

• Drafting (IntDraft) / Wrong representation of the
  Font size from Tools > Standards.
  .
  Scenario:
  1. Open CATIA.
  2. Go to Tools > Standards > Drafting > ISO >
  Styles > Length / Distance Dimension > Default
  > Font >  & change these settings (Font size: 14,
  Bold: Yes, Underline: Yes 7 Colour: Green).
  3. Go to part design.
  4. Create a Pad.
  5. Go to Drafting (with the changed standard).
  6. Create Front view.
  7. Create Dimension.
  8. Go to Tools > Options > General > Parameters
  & Measures > Units & change the setting to Inch.
  9. Go to Drafting (with the same changed standard).
  10. Create front view & create dimension.
  .
  Problem: The font size is different.
  .
  Expected result: It should be as per the standard.
  .
  .
  

Local fix

Problem summary

• Drafting (IntDraft) / Wrong representation of the Font size fro
  m Tools > Standards.
  Drafting (IntDraft) / Wrong representation of the
  Font size from Tools > Standards.
  .
  Scenario:
  1. Open CATIA.
  2. Go to Tools > Standards > Drafting > ISO >
  Styles > Length / Distance Dimension > Default
  > Font >  & change these settings (Font size: 14,
  Bold: Yes, Underline: Yes 7 Colour: Green).
  3. Go to part design.
  4. Create a Pad.
  5. Go to Drafting (with the changed standard).
  6. Create Front view.
  7. Create Dimension.
  8. Go to Tools > Options > General > Parameters
  & Measures > Units & change the setting to Inch.
  9. Go to Drafting (with the same changed standard).
  10. Create front view & create dimension.
  .
  Problem: The font size is different.
  .
  Expected result: It should be as per the standard.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 19 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R18SP05
  INCIDENT DIAGNOSIS
  .
  Drafting (IntDraft) / Wrong representation of the
  Font size from Tools > Standards.
  .
  CORRECTION EXPLANATION
  .
  The was a problem with the combo of the font size
  for the Test Properties, which has now been
  corrected.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51805

     UP08/06/02 I 1000