HD71970: PRINT : CANNOT GENERATE A WORKING XML FILE WITH HP DESIGNJET100 0 SERIES DRIVER

APAR status

• Closed as program error.

Error description

• Print : Cannot generate a working xml file with HP
  DesignJet1000 Series driver
  .
  Scenario
  1 - Start CATIA.
  2 - File / Printer Setup
  3 - Double-click on "Add Printer"
  4 - Select >3D PLM Printer
  5 - Click >OK button.
  6 - Leave name default.
  7 - Change >driver to >HP DesignJet 1000 Series
  8 - In >Paper Format section : Change >Maximum
  to >A1 Roll (Default
  automatically changes to >A1 Roll)
  9 - Click OK.
  Resulting XML printer definition file is missing a
  paper-source definition.
  Result looks like :
  <?xml version="1.0" encoding="utf-8" ?>
  <printer name="Printer 0001"
  export="HP1000GL2">
  <defaultFormat name="A1 ROLL"
  orientation="portrait"/>
  <maxFormat name="A1 ROLL"/>
  <defaultMargins left="10" right="10"
  top="10" bottom="10"/>
  <execUnix/>
  <execWindows>rem Default:Microsoft Office
  Document Image Writer
  if exist &amp;quot;%CATOUT%&amp;quot;
  copy /b %CATOUT%
  Microsoft Document Imaging Writer Port:
  if not exist &amp;quot;%CATOUT%&amp;quot;
  echo
  &amp;quot;The file %CATOUT%
  doesn&amp;apos;t exist.&amp;quot;
  &amp;quot;The file %CATOUT%
  doesn&amp;apos;t
  exist.&amp;quot;
  </execWindows>
  <rtimeUnix/>
  <rtimeWindows>rem
  Default:C:\DOCUME~1\xah\LOCALS~1
  \Temp\catout.out
  set CATOUT=C:\DOCUME~1\xah\LOCALS~1
  \Temp\catout.out
  </rtimeWindows>
  <HP1000GL2Properties mediaType="Default"
  quality="Best" cutterState="YES"
  autoRotate="YES" inkedArea="YES" ret="YES">
  autoRotate="YES" inkedArea="YES"
  ret="YES"> <monoRollFeeder/>
  </HP1000GL2Properties> </printer>
  Expected result :
  <monoRollFeeder/> should be set to >Roll Feed as
  it is the default parameter when clicking "Advanced
  configuration".
  .
  

Local fix

Problem summary

• Print : Cannot generate a working xml file with HP DesignJet100
  0 Series driver
  Print : Cannot generate a working xml file with HP
  DesignJet1000 Series driver
  .
  Scenario
  1 - Start CATIA.
  2 - File / Printer Setup
  3 - Double-click on "Add Printer"
  4 - Select >3D PLM Printer
  5 - Click >OK button.
  6 - Leave name default.
  7 - Change >driver to >HP DesignJet 1000 Series
  8 - In >Paper Format section : Change >Maximum
  to >A1 Roll (Default
  automatically changes to >A1 Roll)
  9 - Click OK.
  Resulting XML printer definition file is missing a
  paper-source definition.
  Result looks like :
  <?xml version="1.0" encoding="utf-8" ?>
  <printer name="Printer 0001"
  export="HP1000GL2">
  <defaultFormat name="A1 ROLL"
  orientation="portrait"/>
  <maxFormat name="A1 ROLL"/>
  <defaultMargins left="10" right="10"
  top="10" bottom="10"/>
  <execUnix/>
  <execWindows>rem Default:Microsoft Office
  Document Image Writer
  if exist &amp;quot;%CATOUT%&amp;quot;
  copy /b %CATOUT%
  Microsoft Document Imaging Writer Port:
  if not exist &amp;quot;%CATOUT%&amp;quot;
  echo
  &amp;quot;The file %CATOUT%
  doesn&amp;apos;t exist.&amp;quot;
  &amp;quot;The file %CATOUT%
  doesn&amp;apos;t
  exist.&amp;quot;
  </execWindows>
  <rtimeUnix/>
  <rtimeWindows>rem
  Default:C:\DOCUME 1\xah\LOCALS 1
  \Temp\catout.out
  set CATOUT=C:\DOCUME 1\xah\LOCALS 1
  \Temp\catout.out
  </rtimeWindows>
  <HP1000GL2Properties mediaType="Default"
  quality="Best" cutterState="YES"
  autoRotate="YES" inkedArea="YES" ret="YES">
  autoRotate="YES" inkedArea="YES"
  ret="YES"> <monoRollFeeder/>
  </HP1000GL2Properties> </printer>
  Expected result :
  <monoRollFeeder/> should be set to >Roll Feed as
  it is the default parameter when clicking "Advanced
  configuration".
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 19 GA LEVEL.
  Incident Diagnosis
  Print : Cannot generate a working xml file with HP
  DesignJet1000 Series driver
  .
  Correction Explanation
  No value generated for the xml field
  monoRollFeeder mediaSource : correction done.
  Now it is generated.
  .
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP