HD64393: MACHINING (NCMANVERIF) / VIDEO REPLAY LEADS TO "MEMORY EXHAUSTE D" MESSAGE.

APAR status

• Closed as unreproducible in next release.

Error description

• Machining (NCManVerif) / Video replay leads
  to "Memory exhausted" message.
  .
  SCENARIO:
  Use the supplied CATSettings.
  1 Open CATProcess
  2 One by one, For each MO which has got a video
  replay saved (indicated by the blue sign), Remove
  the video Result through the contextual menu
  3 Edit the MO
  4 Replay the video for the MO which had the video
  results saved
  5 Click on the icon "Associate Video Result with
  Machining Operation"
  6 Click Ok to exit the video replay menu
  7 Click OK to exit the MO
  The message "Memory Exhausted" happens at
  Blend-Hockey-Blade -Join
  -Intersection MO under Tool Change.21 in
  Y0701032.
  .
  EXPECTED RESULT:
  Such message should not be displayed and video
  replay should be good.
  .
  .
  

Local fix

Problem summary

• Machining (NCManVerif) / Video replay leads to "Memory exhauste
  d" message.
  Machining (NCManVerif) / Video replay leads
  to "Memory exhausted" message.
  .
  SCENARIO:
  Use the supplied CATSettings.
  1 Open CATProcess
  2 One by one, For each MO which has got a video
  replay saved (indicated by the blue sign), Remove
  the video Result through the contextual menu
  3 Edit the MO
  4 Replay the video for the MO which had the video
  results saved
  5 Click on the icon "Associate Video Result with
  Machining Operation"
  6 Click Ok to exit the video replay menu
  7 Click OK to exit the MO
  The message "Memory Exhausted" happens at
  Blend-Hockey-Blade -Join
  -Intersection MO under Tool Change.21 in
  Y0701032.
  .
  EXPECTED RESULT:
  Such message should not be displayed and video
  replay should be good.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• null
  ==========*===========*==========
  THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level AND ON
  V5R17SP06
  .
  Incident Diagnosis
  Video replay leads to 'Memory exhausted'
  message.
  Reason
  The scenario is not reproducible on latest R17 and
  R18 levels.However was reproducible on R17SP3.
  Workaround given for R17SP3 to use "Continue"
  mode for collision instead of "Stop".
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN SP51706

     UP07/06/28 I 1000