HD54519: PROBLEM OF ACTIVATE/DEACTIVATE TOOLING COMPONENT (2)

APAR status

• Closed as program error.

Error description

• Problem of Activate/Deactivate Tooling Component
  (2)
  PROBLEM:
  Hole symbole does not get deactivated after
  deactivating the corresponding Die Component.
  SCENARIO:
  1.  Run the CATIA from attached sample WS.
  2.  Go to "Mold Tooling Design" workbench.
  3.  Select  "Create a new Moldbase" command
  in "Mold Base Components" toolbars.
  4.  "Create a new Moldbase" dialog is diaplayed.
  5.  OK.
  6.  Go to "CAA V5: PressDie Design" workbench.
  7.  Run  "CAA Add DieComponent" command
  in "CAADie Components" toolbars.
  8.  "CAADie Define Component" dialog is diaplayed.
  9.  click on "Option" tab.
  10. Select "EjectorPin_ST_SCREW.CATProduct"
  (delivered) as Reference.
  11. Click on "Positioning" tab.
  12. Select Input "Drill from"
  = "SettingPlate.1", "To" = "ClampingPlate.1".
  13. Place the parts on the top face of SettingPlate.
  14. OK
  15. Select "EjectorPin" and Run "Active/Deactivate
  Tooling Componenet"from context  menu.
  RESULT:
  Hole symbols does not get deactivated in the
  InjectionSide.
  EXPECTED RESULT:
  Hole symbols should be deactivated in the
  Injectionside.
  .
  

Local fix

Problem summary

• Problem of Activate/Deactivate Tooling Component (2)
  Problem of Activate/Deactivate Tooling Component
  (2)
  PROBLEM:
  Hole symbole does not get deactivated after
  deactivating the corresponding Die Component.
  SCENARIO:
  1.  Run the CATIA from attached sample WS.
  2.  Go to "Mold Tooling Design" workbench.
  3.  Select  "Create a new Moldbase" command
  in "Mold Base Components" toolbars.
  4.  "Create a new Moldbase" dialog is diaplayed.
  5.  OK.
  6.  Go to "CAA V5: PressDie Design" workbench.
  7.  Run  "CAA Add DieComponent" command
  in "CAADie Components" toolbars.
  8.  "CAADie Define Component" dialog is diaplayed.
  9.  click on "Option" tab.
  10. Select "EjectorPin_ST_SCREW.CATProduct"
  (delivered) as Reference.
  11. Click on "Positioning" tab.
  12. Select Input "Drill from"
  = "SettingPlate.1", "To" = "ClampingPlate.1".
  13. Place the parts on the top face of SettingPlate.
  14. OK
  15. Select "EjectorPin" and Run "Active/Deactivate
  Tooling Componenet"from context  menu.
  RESULT:
  Hole symbols does not get deactivated in the
  InjectionSide.
  EXPECTED RESULT:
  Hole symbols should be deactivated in the
  Injectionside.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R16SP07.V5R17SP01.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN SP51607

     UP06/10/03 I 1000

• R517 PSN SP51701

     UP06/10/02 I 1000