HD52785: SKETCHER / 3D CONSTRAINTS ARE NOT SHOWN IN PART DESIGN WHEN SET TO HIDE BY VISUALISATION TOOLBAR IN SKETCHER / THOUGH DISPLAY

APAR status

• Closed as program error.

Error description

• SKETCHER / 3D CONSTRAINTS ARE NOT SHOWN
  IN PART DESIGN WHEN SET TO HIDE BY
  VISUALISATION TOOLBAR IN SKETCHER /
  THOUGH DISPLAY OPTION IS ON IN PART
  INFRASTRUCTURE TOOLS / OPTIONS.
  Scenario.
  1. Open the CATPart
  2. Watch the 3D-Constraint displayed
  3. Edit e.g. Sketch.2
  4. In the Sketch Visualization-toolbar select
  icon "Dimensional constraint" (highlighted to non-
  highlighted) the dimensional constraints in Sketch.2
  are no longer displayed: OK
  5. Exit Sketcher-WB
  6. Watch the 3D-Constraints: They are hidden as
  well.
  .
  Expected Result.
  .
  The visualization of the constraints out of the
  Sketcher should be independent from
  the "Dimensional constraintﾨ and managed
  by "Parameters of features and constraints"
  .
  .
  

Local fix

Problem summary

• SKETCHER / 3D CONSTRAINTS ARE NOT SHOWN IN PART DESIGN WHEN SET
  TO HIDE BY VISUALISATION TOOLBAR IN SKETCHER / THOUGH DISPLAY
  O
  SKETCHER / 3D CONSTRAINTS ARE NOT SHOWN
  IN PART DESIGN WHEN SET TO HIDE BY
  VISUALISATION TOOLBAR IN SKETCHER /
  THOUGH DISPLAY OPTION IS ON IN PART
  INFRASTRUCTURE TOOLS / OPTIONS.
  Scenario.
  1. Open the CATPart
  2. Watch the 3D-Constraint displayed
  3. Edit e.g. Sketch.2
  4. In the Sketch Visualization-toolbar select
  icon "Dimensional constraint" (highlighted to non-
  highlighted) the dimensional constraints in Sketch.2
  are no longer displayed: OK
  5. Exit Sketcher-WB
  6. Watch the 3D-Constraints: They are hidden as
  well.
  .
  Expected Result.
  .
  The visualization of the constraints out of the
  Sketcher should be independent from
  the "Dimensional constraint  and managed
  by "Parameters of features and constraints"
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP01.
  .
  Incident Diagnosis
  The constraints were not refreshed
  Correction Explanation
  We now refresh the visualisation  of the constraints
  when we leave the sketcher.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN SP51701

     UP06/10/02 I 1000