HD50558: LICENSING / SHORTCUT (CTRL+SPACE ) FOR DEFINE IN WORK DOES NOT APPLY WHEN SHARABLE LICENSE IS ADDED

APAR status

• Closed as unreproducible in next release.

Error description

• LICENSING / SHORTCUT (CTRL+SPACE ) FOR
  DEFINE IN WORK DOES NOT APPLY WHEN
  SHARABLE LICENSE IS ADDED
  .
  SCENARIO:
  1.Apply attached CATSettings as
  CATUserSettingPath.
  2.Start R15sp3 with HD2 license.
  3.Open test.CATPart.
  >>> Confirm that Customized Toolbar exist.
  4.Select Tool/Customize/Command tab/All
  command/Define in Work
  Object, then select properties button.
  >>> Confirm that image and shortcut Ctrl + space
  is applied as
  accelerator.
  5.Close Customize window.
  6.Select Geometry set.1 in the tree, then key in
  Ctrl+space.
  >>>Geometry set.1 is defined as Work Object.
  Customization is working correctly.
  7.Select Tool/Option/General/Sharable Product tab,
  then select any
  license and close option window.
  8.Select PartBody in the tree, then key in
  Ctrl+space.
  >>> PartBody is not defined as Work Object.
  Customization is not working. This is the problem.
  .
  ADDITIONAL INFORMATION:
  If select sharable license before opening
  test.CATPart, Shortcut Ctrl+Space works correctly.
  .
  EXPECTED RESULT:
  Shortcut setting ￇﾽ( Ctrl+Space ￇﾽ) should be kept
  even though change license.
  .
  

Local fix

Problem summary

• LICENSING / SHORTCUT (CTRL+SPACE ) FOR DEFINE IN WORK DOES NOT
  APPLY WHEN SHARABLE LICENSE IS ADDED
  LICENSING / SHORTCUT (CTRL+SPACE ) FOR
  DEFINE IN WORK DOES NOT APPLY WHEN
  SHARABLE LICENSE IS ADDED
  .
  SCENARIO:
  1.Apply attached CATSettings as
  CATUserSettingPath.
  2.Start R15sp3 with HD2 license.
  3.Open test.CATPart.
  >>> Confirm that Customized Toolbar exist.
  4.Select Tool/Customize/Command tab/All
  command/Define in Work
  Object, then select properties button.
  >>> Confirm that image and shortcut Ctrl + space
  is applied as
  accelerator.
  5.Close Customize window.
  6.Select Geometry set.1 in the tree, then key in
  Ctrl+space.
  >>>Geometry set.1 is defined as Work Object.
  Customization is working correctly.
  7.Select Tool/Option/General/Sharable Product tab,
  then select any
  license and close option window.
  8.Select PartBody in the tree, then key in
  Ctrl+space.
  >>> PartBody is not defined as Work Object.
  Customization is not working. This is the problem.
  .
  ADDITIONAL INFORMATION:
  If select sharable license before opening
  test.CATPart, Shortcut Ctrl+Space works correctly.
  .
  EXPECTED RESULT:
  Shortcut setting  ½( Ctrl+Space  ½) should be kept
  even though change license.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 15.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 17 GA level
  .
  The reported problem was reproduced correctly on
  R15 Sp03 and this is not reproducible on R17 GA
  level.
  On R17 GA level,  Shortcut setting ( Ctrl+Space )
  for define in work object is kept even after adding
  a sharable license.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN

     UP