HD48137: DMUNAV : CANNOT RECORD VIDEO TO AVI FILE USING DIVX CODEC.

APAR status

• Closed as Permanent restriction.

Error description

• DMUNAV : CANNOT RECORD VIDEO TO AVI FILE
  USING DIVX CODEC.
  SCENARIO:
  1. Open the CATProduct out of a directory on PC.
  2. Switch to workbench Digital Mockup - DMU
  Navigator.
  3. Select the sequence in the Applications of the
  CATProduct.Select Sequence.1.
  4. Select Icon for Simulation Player.Player is open.
  5. In Player Parameters (Ctrl+Shift+P) change
  sampling step to 0,2.
  6. Tools/Image/Video
  7. Setup Video-Rec change to requested directory
  Capture/activate document window/Movie/frames
  per sec.30.
  Activate Post Compression Mode
  Select Compressor Setup (Movie)
  Select DivX
  DivX Certified-Profile
  configure - High definition(=Profile)
  DivX Certified-Profile
  Videosequence  1024x768,
  Framerate 30
  Verschlﾁsselungsleistung - Standard
  bitrate - 8000MBit/s
  OK  (to all , only Video Rec left)
  8. Start Video Rec(see picture)
  9. Confirm with OK.
  10. Start Simulation.
  .
  RESULT:CATIA V5 can not record the simulation.
  .
  

Local fix

Problem summary

• DMUNAV : CANNOT RECORD VIDEO TO AVI FILE USING DIVX CODEC.
  DMUNAV : CANNOT RECORD VIDEO TO AVI FILE
  USING DIVX CODEC.
  SCENARIO:
  1. Open the CATProduct out of a directory on PC.
  2. Switch to workbench Digital Mockup - DMU
  Navigator.
  3. Select the sequence in the Applications of the
  CATProduct.Select Sequence.1.
  4. Select Icon for Simulation Player.Player is open.
  5. In Player Parameters (Ctrl+Shift+P) change
  sampling step to 0,2.
  6. Tools/Image/Video
  7. Setup Video-Rec change to requested directory
  Capture/activate document window/Movie/frames
  per sec.30.
  Activate Post Compression Mode
  Select Compressor Setup (Movie)
  Select DivX
  DivX Certified-Profile
  configure - High definition(=Profile)
  DivX Certified-Profile
  Videosequence  1024x768,
  Framerate 30
  Verschl sselungsleistung - Standard
  bitrate - 8000MBit/s
  OK  (to all , only Video Rec left)
  8. Start Video Rec(see picture)
  9. Confirm with OK.
  10. Start Simulation.
  .
  RESULT:CATIA V5 can not record the simulation.
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA.
  .
  Incident Diagnosis:
  DMUNAV : CANNOT RECORD VIDEO TO AVI FILE
  USING DIVX CODEC.
  .
  Restriction Explanation:
  This DIVX Codec doesn't support the API Video For
  Windows AVIStreamSetFormat, this call is
  supported by many others Codecs.
  .
  By-Pass:
  Use a DIVX Direct Show filter instead of this DIVX
  Video For Windows Codec.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels