HD35625: IGES:CATIA EXPORT IN IGES, ONLY B-SPLINE, DOES NOT GIVE A RESUL T CAPABLE OF BEING OPENED IN CIMSTATION

APAR status

• Closed as program error.

Error description

• IGES:CATIA EXPORT IN IGES, ONLY B-SPLINE,
  DOES NOT GIVE A RESULT CAPABLE OF BEING
  OPENED IN CIMSTATION
  .
  

Local fix

Problem summary

• IGES:CATIA EXPORT IN IGES, ONLY B-SPLINE, DOES NOT GIVE A RESUL
  T CAPABLE OF BEING OPENED IN CIMSTATION
  IGES:CATIA EXPORT IN IGES, ONLY B-SPLINE,
  DOES NOT GIVE A RESULT CAPABLE OF BEING
  OPENED IN CIMSTATION
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 16 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R15SP01.
  .
  ANSWER AND BY-PASS :
  .
  It was a particular case of a BSpline curve
  describing a circle,i.e. periodic curve, so that there
  was no limit point because of infinite definition
  (modulo 2Pi).
  The problem has been corrected on the previously
  mentionned levels.
  As a by-pass, you can either change manually the
  values in the step file or export in standard (non B-
  Spline) mode.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R515 PSN

     UP