HD30562: GSA : VON MISES STRESS ARE NOT DISPLAYED WHEN 'GENERAL ANALYSIS CONNECTION' IS USED.

APAR status

• Closed as Permanent restriction.

Error description

• GSA : Von Mises stress are not displayed
  when 'General Analysis Connection' is used.
  For the scenario, please fllow the step by step
  scenario below or refer to the ppt send.
  STEP BY STEP SCENARIO:
  1- Start CATIA R14SP1.
  // 'Point Analysis Connection' case. //
  2- Open the provided CATAnalysis file for Point
  Analysis case.
  3- Go to the Workbench : 'Generative Structural
  Analysis'.
  =>'Von Mises Stress' is displayed.
  (This is the right behavior.)
  4-  Close the file.
  // 'General Analysis Connection' case. //
  5- Open the provided CATAnalysis file for General
  Analysis case.
  6- Go to the Workbench : 'Generative Structural
  Analysis'.
  =>'Von Mises Stress' is not displayed.
  >>>This is problem.
  7- Close the CATIA.
  // R13SP2 open case. //
  8- Start CATIA R13SP2.
  9- Open the provided CATAnalysis file for General
  Analysis case.
  10- Go to the Workbench : 'Generative Structural
  Analysis'.
  =>'Von Mises Stress' is displayed.
  (This is the right behavior.)
  Problem :
  The result displayed in R13SP2 is not displayed in
  R14 when 'General Analysis Connection' is used.
  Result to expect :
  The result displayed in R13SP2 should be displayed
  in R14 even if 'General Analysis Connection' is
  used.
  Remark:
  This analysis file was created in R13SP2.
  .
  

Local fix

Problem summary

• GSA : Von Mises stress are not displayed when 'General Analysis
  Connection' is used.
  GSA : Von Mises stress are not displayed
  when 'General Analysis Connection' is used.
  For the scenario, please fllow the step by step
  scenario below or refer to the ppt send.
  STEP BY STEP SCENARIO:
  1- Start CATIA R14SP1.
  // 'Point Analysis Connection' case. //
  2- Open the provided CATAnalysis file for Point
  Analysis case.
  3- Go to the Workbench : 'Generative Structural
  Analysis'.
  =>'Von Mises Stress' is displayed.
  (This is the right behavior.)
  4-  Close the file.
  // 'General Analysis Connection' case. //
  5- Open the provided CATAnalysis file for General
  Analysis case.
  6- Go to the Workbench : 'Generative Structural
  Analysis'.
  =>'Von Mises Stress' is not displayed.
  >>>This is problem.
  7- Close the CATIA.
  // R13SP2 open case. //
  8- Start CATIA R13SP2.
  9- Open the provided CATAnalysis file for General
  Analysis case.
  10- Go to the Workbench : 'Generative Structural
  Analysis'.
  =>'Von Mises Stress' is displayed.
  (This is the right behavior.)
  Problem :
  The result displayed in R13SP2 is not displayed in
  R14 when 'General Analysis Connection' is used.
  Result to expect :
  The result displayed in R13SP2 should be displayed
  in R14 even if 'General Analysis Connection' is
  used.
  Remark:
  This analysis file was created in R13SP2.
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA.
  Incident Diagnosis
  GSA : Von Mises stress are not displayed
  when 'General Analysis Connection' is used.
  Restriction Explanation
  In fact the wrong behavior is in CATIA V5R13.
  A programming bug has been introduced in CATIA
  V5R12 (or CATIA V5R13) in the general update
  mechanism.
  - This bug is specific to Brep linkage in the case of
  the analysis connection (to be more precise all the
  analysis features that are not mesh dependant).
  - We have corrected in another PMR the problem.
  - Now we are no more able to have some
  compatible software in order to know is the Not
  Uptodate status is coming from the bug or from the
  a geometry modification.
  By-Pass
  Update the model in R14.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels