IBM Support

HC99534: ASSEMBLY CONSTRAINTS ARE NOT LOADED FROM VPM INTO CATIA

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • Create two parts in VPM and associate a CATPart to each.
Create a VPM Part for the assembly node.
Copy and paste the two part with the CATParts onto the
assembly part just created.
Open each of the CATParts from VPMA.
In both CATParts make a sketch with a circle and then a pad
out of the sketch.
Be sure to save the modified CATParts into VPM.
Close both CATParts
Open a PSN of the assembly part.
In the PSN select the two CATParts and open them into CATIA
V5.
In the assembly design workbench, create a coincidence
between the axis
Create an offset constraint between the two parts.
File + Save All in CATIA V5
Close the CATProduct.
Save the PSN graph
Open either of the CATParts from VPMA.
Delete the Pad and Sketch
Create a new Sketch.
In the sketch make a circle.
Make a pad from the sketch.
File + Save in CATIA V5
Close the CATPart
From the PSN of the assembly select the two CATParts and
open them into CATIA V5
Notice the Assembly constraints do not appear and therefore
can't be rerouted.
The BLOB data for the assembly constraints is still in the
feature table but it is not recoverable.
The expected result is for the constraints to show in the
temporary CATProduct but be unresolved. This way the user
have the chance to reroute them.
The assembly constraint belongs to both parts in session and
both CATParts are in design mode so the constraint should be
loaded regardless if it is resolved or not.

Local fix

  • 



Problem summary


    

  • 



Problem conclusion


    

  • THIS PROBLEM WILL BE FIXED ON
  CATIA VERSION 5 RELEASE 11 GA level.
NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R10SP03.

    



Temporary fix


    

  • 



Comments


    

  • 



APAR Information




    

  • APAR number
    HC99534
    • 

  • Reported component name
    CATIA VERSION 5
    • 

  • Reported component ID
    569101000
    • 

  • Reported release
    509
    • 

  • Status
    CLOSED  PER
    • 

  • PE
    NoPE
    • 

  • HIPER
    NoHIPER
    • 

  • Special Attention
    NoSpecatt
    • 

  • Submitted date
    2002-10-10
    • 

  • Closed date
    2003-01-09
    • 

  • Last modified date
    2009-06-23
    • 





    

  • APAR is sysrouted FROM one or more of the following:
    

    • 

  • APAR is sysrouted TO one or more of the following:
    

    • 



Modules/Macros


    

  • FILE

    



Fix information


    

  • Fixed component name
    CATIA VERSION 5
    • 

  • Fixed component ID
    569101000
    • 



Applicable component levels


    

  • R509  PSN
       UP
    • 

  • R510  PSN  SP51003
       UP03/02/21  N  1000
    • 








      
              
                            

              

              [{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA V5"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"509","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
              

                                                                    

          
 
        

      

    

      

        

          

            
Document Information


            

            


                        

            Modified date:
            

            23 June 2009
            

            
                      

        


        

        


      

    

  



    

  

  
    
            

          
Page Feedback