IBM Support

Overview - 20/40GB DLT Internal SCSI Tape Drive

Product Documentation


Abstract

This document begins with an image or table

Content

DLT7000

Tape support reference


At a glance

Back up your business's mission critical data with tape drives backed by IBM. This high performing drive provides a low cost, entry level DLT offering ideally suited for mainstream server systems. Features include:
  • Read while Write data reliability
  • Onboard hardware data compression
Warranty

3 year limited Customer Carry-In Exchange

This product was replaced by

09N4040

Packaging

One box containing...
  • Base drive
  • Multilingual manual
  • Data cartridge
  • Cleaning cartridge
  • Four 6x32 screws
  • Trial backup software CD's
  • Wide-to-narrow SCSI adapter
Marketing and FRU part numbers

World Wide ...
  • Marketing part number: 01K1320
  • FRU part number: 10L6066
Associated product(s)

DLT Tape IV, 1700ft Data Cartridge
  • Marketing part number: 59H3040
DLT Cleaning Cartridge
  • Marketing part number: 59H3092
Product dates

World Wide
  • Announce Date: 15 April 1998
  • Planned Availability Date: 12 June 1998
  • Withdrawal Date: 30 Apr 2002
Technical specifications
Performance specifications as known at time of announcement:
Backup rates
  • Native: 1.5MB/s
  • Compressed: 3MB/s, which is equivalent to 10.8 GB/hr. (With the use of hardware-controlled data compression.)
Interface type
  • SCSI 50 Pin (8 bit, open ended)
Storage capacity
  • Native: 20GB
  • Compressed: 40GB (With the use of hardware-controlled data compression.)
Tape formats supported
  • DLT tape-IV
Physical, Environmental, and Compatibility Specifications as known at time of announcement
Weight: * lbs(* kg)
Height: * inches(86.4 mm)
Width: * inches(149.1 mm)
Depth: * inches(243.8 mm)

Operating temperature
  • low of 10 degrees Celsius to a high of 40 degrees Celsius
Relative Operating Humidity
low of 20% to a high of 80%

Agency approvals
  • C-tick (Australia)
  • CE
  • CSA
  • TUV
  • UL

Hardware requirements for IBM systems
*

  • IBM Netfinity 4500R (8656)
  • IBM eserver xSeries 330 (8654)
  • IBM eserver xSeries 340 (8656)

Hardware requirements for Non-IBM systems
The 20/40GB DLT Tape Drive is supported on most non-IBM Intel based systems with a supported SCSI controller and an available 5.25" (extra depth) bay.

Compatibility
Cable may be required only if used with a separate SCSI controller.

Limitations
Some configurations may not be supported.

Supported software

  • Seagate Backup Exec V7.0 or higher for Windows NT (included)
  • Seagate Backup Exec V7.5 or higher for NetWare (included)
Other
Requires mounting kit and rails included with system unit.

Document Location

Worldwide

Operating System

System x Hardware Options:All operating systems listed

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00DID","label":"System x Hardware Options->Tape Drive->20 \/ 40 GB->01K1320"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1VLAR-3TNK2G

Page Feedback