- If you are not already signed on to the system as the security
officer (QSECOFR user profile), do so now.
Note: The System i® Main Menu (or
the menu you chose as your initial menu) appears on the console.
If you are installing from an image catalog
(virtual media device), the setup instructions are in the topic Preparing to upgrade or replace software using an image catalog. If you are installing from optical media, insert the
volume of the licensed program that you want to install into the installation
device. If this is a new installation, insert the first volume containing
the operating system. For more information about the optical media
you received with your order, see Media labels and their contents. Wait until
the In Use indicator goes out before you continue. 
- If you are installing from virtual optical
storage using the Network File System, the setup instructions are
in the topic Preparing to upgrade or replace software with virtual optical storage using the Network File System.
- Do the following to put the system in a restricted
state and filter the messages that appear.
- Type CHGMSGQ QSYSOPR *BREAK SEV(60) and press
Enter.
- A message display could appear. Press Enter.
- Type ENDSBS *ALL *IMMED and press Enter.
- When the following message appears, press Enter to continue:
ENDSBS SBS(*ALL) command being processed
- The message System ended to restricted condition appears.
Press Enter to continue.
- Type CHGMSGQ QSYSOPR SEV(95) and press Enter.
- A message display could appear. Press Enter.
- Type GO LICPGM and press Enter.
- The Work with Licensed Programs display
appears.
LICPGM Work with Licensed Programs
System: XXXX
Select one of the following:
Manual Install
1. Install all
Preparation
5. Prepare for install
Licensed Programs
10. Display installed licensed programs
11. Install licensed programs
12. Delete licensed programs
13. Save licensed programs
If
you were referred here from step 4, complete this step
and then return to step 5. If you are
following the tasks in this topic and want to accept software agreements
for your licensed programs individually, continue with step 7.
If you have many licensed
programs to install, accepting them together is faster than accepting
them individually through manual installation. If you want to preaccept
your licensed program agreements all at one time, select option 5
(Prepare for install).
- Select the option to work with software agreements. If a licensed
program that you want to install does not appear on the Work with
Software Agreements display, use F22 (Restore software agreements).
Otherwise, continue with the next step.
- Type a 5 to display the software agreements for
the licensed programs that you want to install and press Enter. Press
F14 to accept the software agreements and then return to the Work
with Licensed Programs display.
- On the Work with Licensed Programs display,
either type 1 (Install all) or type 11 (Install
licensed programs). Read the following note to help you decide.
Note: If you want to install all licensed programs that are
on the distribution media, use Manual Install option 1,
Install
all. This will save time for the installation. If you want
most of the licensed programs on the media, then Manual Install option
1 is also the preferred choice. You will have to delete the extra
unwanted licensed programs. The
Manual Install display
appears after selecting Manual Install option 1.
Type the following
on this display:
- Install option: 2 (2=all products)
- Installation device: OPT01
- Replace if current: N
- Nonaccepted agreement: 2 (2=Display software
agreement)
- Automatic IPL: N
In this example, OPT01 is used for the installation device.
If you use a different naming convention, type the name that you have
assigned to the installation device.
For more information about
using option 1, refer to Manual installation Option 1. Install all.
Press
Enter. If you typed 1, continue with step 11 of these instructions.
- If you typed 11, the Install
Licensed Programs display appears.
Page through the
display to find the licensed programs you want. Type a 1 in
the Option column next to the licensed programs to be installed.
Install Licensed Programs
System: XXXX
Type options, press Enter.
1=Install
Licensed Product
Option Program Option Description
_ _______ _______
_ 5770SS1 Library QGPL
_ 5770SS1 Library QUSRSYS
_ 5770SS1 1 Extended Base Support
_ 5770SS1 2 Online Information
_ 5770SS1 3 Extended Base Directory Support
_ 5770SS1 5 System/36 Environment
_ 5770SS1 6 System/38 Environment
_ 5770SS1 7 Example Tools Library
_ 5770SS1 8 AFP Compatibility Fonts
_ 5770SS1 9 *PRV CL Compiler Support
_ 5770SS1 12 Host Servers
_ 5770SS1 13 System Openness Includes
More...
F3=Exit F11=Display status/release F12=Cancel F19=Display trademarks
Notes: - The following items are preselected if you are
installing licensed programs as part of a new system installation.
- 5770-SS1 Library
QGPL
- 5770-SS1 Library
QUSRSYS
- 5770-SS1 option
1, Extended Base Support
- 5770-SS1 option
3, Extended Base Directory Support
- 5770-SS1 option
30, QSHELL
- 5770-SS1 option
33, Portable App Solutions Environment
- 5770-DG1, IBM HTTP
Server for i
- 5761-JV1, IBM Developer
Kit for Java™
- 5761-JV1 option
11, Java SE 6 32 bit
If you are adding additional (new) licensed programs or optional
parts, these items would be preselected only if they are in an error
state.
- A licensed program you want to install might not be listed on
the Install Licensed Programs display. If a licensed program is not
listed, it can be added to the list by entering information into the
blank fields at the top of the list. After you press Enter, this product
then appears on the list with the other products.
- Type 1 in the Option column.
- Type the product identifier in the Licensed Program column.
- Type the product option value in the Product Option column.
- Press Enter.
When you are typing the product option, the system accepts
only the following three values: *BASE, option number, or *ALL.
- A value of *BASE installs only the base product of the associated
product identifier.
- The product option number installs only the particular option
of the associated product identifier. To be able to install options,
you must install the base product (*BASE).
- A value of *ALL installs the base product and all options of the
associated product identifier that are found on the media.
Keep in mind that licensed programs that you add will
appear on the list with only the product identifier and will not give
a descriptive name of the product. Also, you should check the documentation
that came with the product to see whether there are any special instructions.
If
you get a message that the product already appears in the list, scroll
down to the product. Make sure that there is a 1 in the Option
column. Make sure that it is selected for installation.
Press Enter.
- The Confirm Install of Licensed Programs
display appears on the console. Press Enter to confirm
your choices.
- The Install Options display appears.
Install Options
System: XXXX
Type choices, press Enter.
Installation device . . . OPT01 Name
Objects to install . . . . 1 1=Programs and language objects
2=Programs
3=Language objects
Nonaccepted agreement. . . 2 1=Do not install licensed program
2=Display software agreement
Automatic IPL . . . . . . N Y=Yes
N=No
Type
the following on this display:
- Installation device: OPT01 (In this example,
OPT01 is used for the installation device. If you use a different
naming convention, type the name that you have assigned to the installation
device.)
- Objects to install: 1
- Nonaccepted agreement: 2
- Automatic IPL: N
- One or both of the following displays show
the status of the licensed programs and language objects as they are
being installed on the system. You do not need to respond to these
status displays.
Installing Licensed Programs
System: XXXX
Licensed programs processed . . . . . . . . . . : 0 of XXX
Licensed program install in progress
The following display is an example of the display that
appears during the installation process.
Installing Licensed Programs
System: XXXX
Licensed programs processed . . . . . . . . . . . . . . . : X of XXX
Licensed
Program Option Description Type
5770SS1 12 Host Servers 2924
Note: This display shows which licensed programs
and optional parts of licensed programs are being installed. After
the *PGM objects and *LNG objects for each licensed program or optional
part have been installed, the licensed program identifier disappears
from the display and the number in the licensed programs processed
field changes to show how many are processed.
- You might see the Display Messages display. If you have
another media volume that contains licensed programs to load, you
can load it at this time. If you are installing from optical media,
wait for the In Use indicator to go out before responding to the message.
Display Messages
System: XXXX
Queue . . . . . : QSYSOPR Program . . . . : *DSPMSG
Library . . . : QSYS Library . . . :
Severity . . . . : 95 Delivery . . . : *BREAK
Type reply (if required), press Enter.
Load the next volume in optical device OPT01 (X G)
Reply . . . . G
Type G and press Enter.
After you load each volume, type G and press Enter.
If there are no more volumes to load that contain licensed programs,
or if you want to end the loading process, type X and
press Enter.
- If a licensed program requires acceptance of a software
agreement, the Software Agreements display appears. Do either of the
following:
- Press F14 to accept the agreement and allow the licensed program
to continue installing.
- Press F16 to decline the agreement and end the installation of
that licensed program.
- The Work with Licensed Programs display
appears on your console when the installation process is completed.
One of the following messages appears on the bottom of the Work with
Licensed Programs display.
Work with licensed
programs function not complete. Go to the topic Troubleshooting software installation problems to determine
the problem.
Work with licensed programs function has
completed. Continue with the next step.
- Verify the installed status values of your licensed programs
and check for compatibility. It is important to make sure all of your
licensed programs are compatible with the operating system.
Use
LICPGM menu option 10 (Display licensed programs) to see the release
and installed status values of the installed licensed programs. If
the installed status value of a licensed program is *COMPATIBLE, it
is ready for use. If the installed status value of a licensed program
is *BACKLEVEL, the licensed program is installed, but its version,
release, and modification is not compatible with the currently installed
level of the operating system. Check the topic, Licensed program releases and sizes, to verify the current
version, release, and modification of the licensed program. Installed status values lists the possible installed
status value descriptions.