Explanation
Action was taken against the coupling facility
or the CFRM active policy for a given structure. The coupling facility
containing named structure is identified by the node descriptor. See
mapping IXLYNDE.
In the message text:
- strname
- Name of the structure for which information is recorded.
- type
- Node type (see ndetype in IXLYNDE).
- mfg
- Node manufacturer ID (see ndemfg in IXLYNDE).
- plant
- Node manufacturer plant ID (see ndeplant in IXLYNDE).
- sequence
- Node sequence number (see ndesequence in IXLYNDE).
- partition
- Node LPAR partition number (see ndepartition in IXLYNDE).
- side
- The node PP/SI mode indicator and configuration code from the
IXLYNDE are used to determine the value for side. side is
one of the following:
- SIDE: 0
- The coupling facility is on SIDE 0 of a partitionable CPC.
- SIDE: 1
- The coupling facility is on SIDE 1 of a partitionable CPC.
- blank
- The coupling facility is in a non-partitionable CPC.
- cpcid
- Node Central Processor Complex (CPC) ID (see ndecpcid in IXLYNDE).
- status
- One of the following:
- DEALLOCATED.
- The non-persistent structure was found in both the CFRM active
policy and the coupling facility. All non-persistent structures are
deallocated and cleared from the CFRM active policy during coupling
facility cleanup.
- NOT FOUND IN COUPLING FACILITY. CFRM ACTIVE POLICY CLEARED.
- The structure described in the CFRM active policy is not allocated
in the coupling facility. The CFRM active policy structure information
has been updated to indicate that the structure is not allocated.
- NOT FOUND IN THE CFRM ACTIVE POLICY. DEALLOCATED FROM COUPLING
FACILITY.
- The structure found in the coupling facility is not described
in the CFRM active policy. It is a non-persistent structure and therefore
was deallocated.
- NOT FOUND IN THE CFRM ACTIVE POLICY. STRUCTURE ADDED TO THE CFRM
ACTIVE POLICY.
- The structure was found in the coupling facility and was added
to the CFRM active policy.
- NOT FOUND IN THE CFRM ACTIVE POLICY. COULD NOT BE ADDED TO THE
CFRM ACTIVE POLICY.
- The structure was found in the coupling facility and an attempt
was made to add it to the CFRM active policy. The structure was not
added to the CFRM active policy due to size constraints. Message
IXC503I will be issued to indicate the changes required to add the
structure to the CFRM active policy.
- HAS CONNECTIONS PENDING RECONSTRUCTION INTO THE CFRM ACTIVE POLICY.
- The structure in the coupling facility has connections that could
not be added into the CFRM active policy. The CFRM active policy does
not have enough CONNECT records to support the connections found in
the coupling facility. Message IXC502I will be issued to indicate
the changes required to add the connections to the CFRM active policy.
- DEALLOCATED. MORE CURRENT VERSION IN THE CFRM ACTIVE POLICY.
- The structure in the coupling facility is different than the structure
described by the CFRM active policy. The structure in the coupling
facility was deallocated. The structure in the CFRM active policy
has either been allocated after the one in the coupling facility and/or
is already in use by active connections in the sysplex. This can happen
if the coupling facility containing the structure is brought on line
after a connector has already connected to and allocated the structure
in a different coupling facility.
- DEALLOCATED. NEW STRUCTURE ALLOCATED FOR REBUILD WHICH HAS BEEN
STOPPED.
- The structure in the coupling facility is the new structure for
which rebuild processing was underway before cleanup processing began.
Rebuild is automatically stopped when the first system in the sysplex
gains ownership of the coupling facility.
- FAILED.
- The structure was found in the coupling facility and experienced
a failure. The CFRM active policy structure information has been updated
to indicate the structure is not allocated and the structure has been
deallocated.
- ALLOCATED BY A DIFFERENT SYSPLEX HAS BEEN DEALLOCATED AS REQUESTED.
- The structure that was found was allocated by another sysplex.
The operator was prompted with messages (IXC523I and IXC508A) to
determine the action.
- NOT FOUND IN COUPLING FACILITY. STRUCTURE FAILURE INITIATED.
- The structure described in the CFRM active policy is not allocated
in the coupling facility and there are active connections to the structure.
Structure failure processing has been initiated in order to notify
the connections. that the structure no longer exists.
- thread
- Used to tie together messages and XCF component trace records
for a particular coupling facility cleanup process.
System action
The CFRM active policy is updated to reflect the
current state of the coupling facility.
Operator response
System programmer response
Source
Cross System Coupling Facility (SCXCF)
Module
Routing code
Descriptor code