Explanation
XCF cannot carry out a POLICY action specified
in the processor resource/systems manager (PR/SM™) POLICY parmlib member or the sysplex
failure management (SFM) policy.
In the message text:
- PR/SM
- XCF was executing PR/SM POLICY
support.
- SFM
- XCF was executing SFM POLICY support.
- memname
- The name of the XCF PR/SM POLICY
parmlib member or SFM policy name.
- SYSRESET
- The XCFPOLxx parmlib member or SFM policy specified RESETTIME
to indicate that a failing system should be reset after the specified
amount of time.
- DEACTIVATE
- The XCFPOLxx parmlib member or SFM policy specified DEACTTIME
to indicate that the logical remove (LPAR) where the failing system
resides should be deactivated after the specified amount of time.
- sysname
- XCF was asked to reset or deactivate one of the systems in the
sysplex, or ALL.
- response-code
- The PR/SM response code.
- UNABLE TO RESET ALL CHANNEL INTERFACES
- XCF was unable to complete system reset processing.
- PR/SM AUTHORIZATION FAILURE
- This system was not authorizes on the PR/SM security frame (LPSEC) to perform the
system reset or deactivate function for another system. In this case,
the system programmer or operator has specified conflicting policies
between XCF and PR/SM.
- PR/SM TIME OUT FAILURE
- The requested action timed out. The action may or may not have
been initiated for the target logically removed mode (LPAR).
- ALL STORAGE ALREADY ONLINE
- No storage elements were available to handle a DEACTIVATE request.
- FUNCTION NOT ENABLED
- XCF could not perform the requested action because the target
system did not enable its PR/SM system
authority XCF normally does not enable the PR/SM system authority until the master scheduler
initialization phase of the system initialization process. The system
issues message IXC421E on the target system.
- SYSTEM NOT IN AN LPAR ON THIS CPC
- XCF could not carry out the POLICY action because the system being
activated or reset does not have LPAR support.
- UNEXPECTED PR/SM RESPONSE
CODE=response-code
- An unexpected response code was received from the processor controller
after attempting the specified function. XCF did not complete the
requested function.
System action
The deactivate or reset function
specified in the XCFPOLxx parmlib member or the SFM policy is ignored.
The system may issue message IXC402D. The PR/SM console may display additional messages
when the processor controller returns a response-code.
If FUNCTION
NOT ENABLED appears in the message text, and XCF is unable to
set the PR/SM system authority,
the system issues message IXC421E on the target system.
If the failed reset or deactivate request is initiated
because of a status update missing condition, the system falls back
to initiating the system default action of ISOLATETIME(0).
Operator response
Because the system ignores the
reset or deactivate request, manual reconfiguration action might be
necessary.
Follow the operator response for message IXC402D
if the system issues it. Notify the system programmer.
System programmer response
Correct errors in the
PRSMPOLICY, SFM policy, or PR/SM security
frame (LPSEC) which may have caused this situation.
If the problem
persists, search problem reporting data bases for a fix for the problem.
If no fix exists, contact the IBM® Support
Center.
Source
Cross System Coupling Facility (SCXCF)
Module
IXCS2PAT, IXCS2WTO, IXCS4TSK
Routing code
Descriptor code