CSV732I hh.mm.ss RTLS DISPLAY text
Explanation
Where text is:
PHYSICAL LIBRARY library SEQ seqnum
MAXBELOW: maxbelowK BELOW USED:
belowusedK [*FULL*]
MAXABOVE: maxaboveK ABOVE USED:
aboveusedK [*FULL*]
CACHE FULL THRESHOLD: fullthresh COUNT:
fullcount
[DELETE PENDING ]
[THIS PHYSICAL LIBRARY HAS NO DATA SETS]
[CONCAT VOLUME DATA SET]
[n v d]
[n v d]
[RTLS IS NOT MANAGING ANY MATCHING
MODULES FOR THIS LIBRARY.]
[MODULE FLAGS EPADDR LOADPT LENGTH
LOADPT2 LENGTH2]
[modname flags epaddr loadpt len
loadpt2 len2]
[modname flags epaddr loadpt len
loadpt2 len2]
In response to a DISPLAY RTLS,PHYSICAL command, this message displays information about the physical library.
In the message text:
- hh.mm.ss
- The time in hours (00-23), minutes (00-59), and seconds (00-59) of the DISPLAY RTLS command.
- library
- The name of the library
- seqnum
- The sequence number of the library.
- maxbelow
- The allowable RTLS limit of common storage usage below 16 megabytes for this physical library in units of 1024 as indicated by the K following the number.
- belowused
- The amount of common storage used below'16 megabytes for this library, in units of 1024 as indicated by the K following the number.
- *FULL*
- The cache is considered to be full.
- maxabove
- The allowable RTLS limit of common storage usage above 16 megabytes for this physical library in units of 1024 as indicated by the K following the number.
- aboveused
- The amount of common storage used above 16 megabytes for this library, in units of 1024 as indicated by the K following the number.
- fullthresh
- The limit of how many times the cache can not have room for a requested module before the cache is considered to be full.
- fullcount
- The number of times the cache did not have room for a requested module.
- CONCAT n
- The number of this data set within the physical concatenation.
- VOLUME v
- The name of the volume on which the data set resides. If located by the catalog, CATALOG is displayed.
- DATA SET d
- The data set name
- MODULE modname
- The name of the exit routine
- FLAGS flags
- One of the following:
- PS
- The module was preloaded successfully.
- PR
- The module was requested to be preloaded but was not, due to cache size limitations.
- ␢
- The module was not requested to be preloaded.
- EPADDR epaddr
- The entry point address of the module. Bit 0 of this word is on if the module is to be called in 31-bit AMODE.
- LOADPT loadpt
- The load point address of the module's primary extent.
- LENGTH len
- The length of the module's primary extent.
- LOADPT2 loadpt2
- The load point address of the module's secondary extent, or blank if there is no secondary extent.
- LENGTH2 len2
- The length of the module's secondary extent, or blank if there is no secondary extent.
System action
The system continues processing.
Module
CSVRDACT
Source
Contents supervision (CSV)
Routing Code
-
Descriptor Code
5