z/OS MVS System Messages, Vol 3 (ASB-BPX)
SA38-0670-00
BPXH002E
There are inconsistent sysplex parameters. In BPXPRMxx, SYSPLEX(NO)
is being used, but the originator specified SYSPLEX for the parameter
of check USS_FILESYS_CONFIG in HZSPRMxx.
BPXH003I
z/OS UNIX System Services was
initialized using OMVS=(suffix), where each 2-character
item is a BPXPRMxx suffix.
BPXH004I
No file systems are mounted; check_name could
not be run.
BPXH005I
The automove configuration verification was not performed
because the parameter specified NOPLEX for the
parameter of check check_name in HZSPRMxx.
BPXH007E
File system file system is designated
as AUTOMOVE, but the parent file system is not.
BPXH009I
No errors were detected in the file system configuration.
BPXH010E
check_name is not applicable because z/OS UNIX System
Services is not available.
BPXH011E
There are inconsistent sysplex parameters. In BPXPRMxx,
SYSPLEX(YES) is being used, but the parameter specified
NOPLEX for the parameter of check check_name in
HZSPRMxx. IBM SUGGESTION: NOPLEX
reflects a single system image without file system sharing. The HZSPRMxx
parameter for this check should be consistent with the BPXPRMxx SYSPLEX
parameter.
BPXH012E
File system file system is designated
as AUTOMOVE, but the parent file system has an automove configuration
error.
BPXH013E
Service service failed with return code rc and
reason code rsn while performing check check_name.
BPXH014E
The version file system file system is
mounted read-write, but it should be mounted read-only.
BPXH015E
File system file system is designated
as automove_setting, but it should be designated
as AUTOMOVE.
BPXH016E
The sysplex root file system is mounted
read-only and should be mounted read-write.
BPXH017E
System-specific file system file system is
mounted read-only and should be mounted read-write.
BPXH018E
The system-specific file systemfile system should
be designated as UNMOUNT.
BPXH020E
check_name received an unknown function
code of function code from IBM Health Checker for z/OS.
BPXH021E
check_name received an unknown entry code
of entry code from IBM Health
Checker for z/OS.
BPXH023E
A call to the STORAGE OBTAIN service failed with return code rc.
BPXH024E
The user ID associated with hzsproc is
not authorized to file system file system. This
report is incomplete.
BPXH025E
File system file system does not support
multilevel security. Unpredictable results will occur.
BPXH026I
The system-specific file system file system path path should
be designated as UNMOUNT.
BPXH028E
The user ID associated with hzsproc is
not defined to RACF.
BPXH029I
In BPXPRMxx, SYSPLEX(NO) is being used. check_name is
cannot run in the current environment.
BPXH034I
The value of value found for MAXFILEPROC
meets the minimum parameter suggestion of check
value.
BPXH035I
The value of value found for MAXSOCKETS
(AF_INET) meets the minimum parameter suggestion
of check value.
BPXH036I
The automount physical file system is not started.
BPXH037I
The AF_INET physical file system is not started.
BPXH038I
The Automount shell command has not been started.
BPXH039I
No differences were found between the system settings and
the settings in the BPXPRMxx parmlib members.
BPXH040E
One or more differences were found between the system settings
and the settings in the current BPXPRMxx parmlib members.
BPXH041I
The following differences were found between the system settings
and the BPXPRMxx parmlib members: text
BPXH046E
Syntax error(s) were found in the parmlib members.
BPXH059I
The following file systems are not active: ----------------------------------------------------------- File
System: filesystem Parmlib
Member: parmlib Path: mountpoint Return
Code: retcode Reason Code: rsncodeFile
System: filesystem Parmlib
Member: parmlib Path: mountpoint Return
Code: retcode Reason Code: rsncode
BPXH061E
One or more file systems specified in the BPXPRMxx parmlib
members are not mounted.
BPXH062I
All file systems specified by ROOT and MOUNT statements in
the BPXPRMxx parmlib members used to configure z/OS UNIX System Services are mounted.
BPXH063I
The following file systems are available through a remote
owner system: ----------------------------------------------------------- File
System: filesystem Mount Mode: mountmode PFS
Type: PFStypeFile
System: filesystem Mount Mode: mountmode PFS
Type: PFStype
BPXH065E
One or more file systems that should be locally mounted are
available through a remote system.
BPXH066I
All file systems that can be locally mounted in the shared
file system configuration are accessed locally.
BPXH069I
The following HFS file systems were found: filesystemfilesystemfilesystem
BPXH071E
The z/OS UNIX System Services kernel usage of autodata
cellpool cells has exceeded the check threshold of stacksthresholdpct%.
Currently stacksused of the maximum stacksmax (stacksusedpct%)
cells are in use.
BPXH072E
The z/OS UNIX System Services kernel usage of monitored
below the bar private storage has exceeded the check threshold of thresholdpvtstgpct%.
Currently allocpvtstg of maxpvtstg bytes
(allocpvtstgpct%) of monitored private storage
has been allocated.
BPXH901I
Volume ROOT_FS_VOLUME on which your root
file system (ROOT_FS_DSN) is stored has ROOT_FS_VOLSIZE cylinders
of unused space. The percentage of free space on this volume is ROOT_FS_VOLSIZE_PERCENT.
This unused space is expected to be acceptable for migration.
BPXH902E
The volume on which your root file system is stored has ROOT_FS_VOLSIZE cylinders
of unused space at a percentage of ROOT_FS_VOLSIZE_PERCENT free
space. This unused space is not expected to be acceptable for migration.
BPXH903I
The version root file system data set is SMS-managed. This
migration check is not applicable.
BPXH904E
The parameter MIN_CYLINDERS was not a
valid parameter. Make sure the MIN_CYLINDERS parameter
is a number between 500-1 000 000.
BPXH905E
CHECK(IBMSS_ZOSMIGREC_ROOT_FS_SIZE) encountered an internal
problem with a volume.
BPXH906E
Check error. CHECK(IBMSS_ZOSMIGREC_ROOT_FS_SIZE) encountered
an internal problem with the file system name.
BPXH913I
All directories verified were found to be acceptable for
the new symbolic links added in z/OS V1R13.
A migration action is not required.
BPXH915E
One or more of the directories verified were found to contain
post-install customization that is expected to be affected by the
new symbolic links added in z/OS V1R13,
or there were problems accessing the directory. A migration action
is required.
BPXH916I
The user does not have appropriate authority to DIR_VERIFIED.
BPXH920I
The ENTRY_TYPE DIR_VERIFIED is
customized to the /var directory.