Explanation
System action
This fast replication processing ends. DFSMShsm processing
continues.
Programmer response
Review and resolve the cause of the problem
and reissue the command.
- Retcode
- Response
- 2
- Issue the LIST COPYPOOL(cpname)
command to obtain a list of valid versions for the copy pool. If necessary,
reissue the FRBACKUP DUMPONLY or FRRECOV command specifying a valid
existing version, generation date or token. For
FRRECOV COPYPOOL, either select an existing DASD copy or use individual
FRRECOV TOVOLUME commands to recover the required tape copies.
- 4
- Issue the QUERY COPYPOOL(cpname) command to
determine which volumes are in a relationship. If
the QUERY COPYPOOL command returns message ARC1821I, the FlashCopy relationships were established
outside DFSMShsm.
The FlashCopy relationships
that the source volumes are in must be completed before the FRRECOV
command can be processed. See z/OS DFSMShsm Storage Administration to
determine what actions you can take.
- 6
- Issue LIST PVOL(source volume) to determine which copy pools the
volume is defined to. You can use the LIST COPYPOOL command to see
the copy pools of which the volume is a member. From the available
copy pools, determine which copy pool backup version should be used
for the recovery. Reissue the FRRECOV command with the FROMCOPYPOOL
keyword to specify the selected copy pool name.
- 10
- See message ARC1807I to determine why you could not select a target
volume.
- 12
- See the corresponding ARC0184I message for additional information.
- 14
- Issue the LIST COPYPOOL(cpname)
command to view the tokens associated with this copy pool. Reissue
the FRBACKUP DUMPONLY or FRRECOV command using an existing TOKEN for
a valid backup version for this copy pool.
- 16
- Determine the volume that you intend to recover,
specify the volser for that volume as the TOVOLUME
parameter and reissue the command. The LIST COPYPOOL(cpname)
command can be used to determine which volumes are backed up as part
of a copy pool backup version.
- 22
- See the corresponding ARC0570I message for additional information.
- 24
- No volumes were processed during the Fast Replication
Recovery. Issue LIST COPYPOOL(cpname) to determine
what should have been processed during this Fast Replication Recovery.
- 28
- Wait for processing of the COPY POOL identified
in the message to complete processing, and reissue the Fast Replication
command if necessary.
- 30
- Contact IBM® support.
- 34
- Records indicate that not all of your volumes may
have been recovered. Issue the LIST COPYPOOL(cpname)
to see a list of all volumes that should have been recovered during
this process and confirm that they were recovered successfully. The
ARC1805I message lists all volumes that were recovered as a part of
this copy pool.
- 36
- The user that issued the FRRECOV command was not RACF authorized to the command. Determine if
the user requires this access and authorize the user to the command.
Reissue the command.
- 38
- Use the RECOVER command to recover a non-fast replication backup
version, if a non-fast replication backup version is available for
the volume you are attempting to recover.
- 42
- Issue the LIST COPYPOOL(cpname) command to
view the valid versions and media formats associated with this copy
pool. Reissue the FRRECOV command using an existing valid version
for this copy pool.
- 44
- Issue the LIST PVOL(volser) ALLDUMPS to find
valid dump volumes for the volume that you are attempting to recover.
- 46
- Issue the LIST PVOL(volser) ALLDUMPS to find
valid dump volumes for the volume that you are attempting to recover.
- 48
- Issue the LIST COPYPOOL(cpname) command to
view the dump classes associated with the copy pool you are attempting
to recover from. Determine the dump class you want to recover from
and reissue the FRRECOV command using a valid dump class for this
copy pool.
- 50
- The DASD version being rolled off has an incomplete dump. Options
are: Complete the partial dump using the FRBACKUP DUMPONLY command.
Delete the DASD version or partial dump using the FRDELETE command.
Use the FORCE keyword on the FRBACKUP command to create the new backup.
In this case the partial dump will remain partial and cannot be resumed.
- 51
- Issue QUERY ACTIVE and LIST COPYPOOL (cpname)
commands to ensure no active dump tasks exist on other hosts and reissue
the failed command.
- 52
- The oldest DASD generation can not be rolled off when active dump
tasks exist for it. A new version cannot be created until active dump
processing completes, dump processing is canceled, or the version
is deleted. When dump processing has ceased, if the dump version is
marked partial, the FORCE parameter must be used on the FRBACKUP DUMP
command.
- 54
- Issue the LIST PVOL(volser) ALLDUMPS to find
valid dump volumes for the volume that you are attempting to recover.
- 56
- The Fast Replication command for copy pool cpname
cannot be processed by a pre z/OS V1R11
host. If the command is FRBACKUP, issue the Fast Replication command
for copy pool cpname in a z/OS V1R11
or later environment.
- 57
- To override the backup storage group when non-dump versions exist,
issue the FRDELETE command against the copy pool and specify DASDONLY
(or both to also delete dump versions). Then reissue the FRBACKUP
command with the alternate backup storage group.
- 58
- To change the alternate backup storage group, issue the FRDELETE
command against the copy pool and specify DASDONLY (or both to also
delete dump versions). Then reissue the FRBACKUP command with the
new alternate backup storage group. To use the existing alternate
backup storage group, remove the BSG keyword from the FRBACKUP command.
- 60
- If a copy pool incremental version is needed, the copy pool definition
must be changed so that the number of DASD backup versions is greater
than 0.
- 62
- FCINCREMENTAL and FCINCREMENTALLAST can only be specified if there
is no current copy pool incremental version or the current copy pool
incremental version is the next version to be replaced. Use the LIST
COPYPOOL(cpname) command to verify that the oldest
possible disk generation is an incremental version. If the current
copy pool incremental version is not the oldest disk generation and
the next version is needed as a copy pool incremental version, delete
the current copy pool incremental version by using the FRDELETE command.
- 64
- Delete the incremental version, if a NOCOPY environment is required.
Issue the LIST CP(cpname) command to determine
the version number of the incremental version and use the FRDELETE
command to delete it. Issue the FRBACKUP command again.
- 66
- Do one of the following:
- If an incremental version is required in the copy pool and the
number of versions is greater than zero, change the number of versions
in the copy pool definition when the incremental version is the oldest
disk generation possible. Issue the FRBACKUP command again.
- If multiple incremental versions exist, use the FRDELETE
command to delete unwanted copy pool backup versions before reducing the number of versions in the
copy pool.
- Issue LIST CP(cpname) to determine which version
is the incremental version and delete the incremental version by using
the FRDELETE command. Issue the FRBACKUP command again with the FCINCREMENTAL
keyword.
- 67
- See the corresponding ARC1849I and ARC1850I messages for more information.
- 68
- PARTIALOK must be specified on the FRRECOV FROMDUMP command to
successfully recover this partial copy pool backup version. You should
first confirm you want the partial version recovered before you reissue
this command.
- 70
- An ARC1812I message is also issued for this failure. Determine
the return code in the ARC1812I and see the ARC1812I text for further
information.
- 72
- Ensure all the volumes in the copy pool are online.
- 76
- See the corresponding ARC1848I message for more information.
- 78
- Remove the VERIFY(N) parameter from the FRRECOV command and retry
the recovery operation.
- 80
- Wait for dump to complete or issue the FRRECOV command with FORCE
keyword to recover immediately, and stop dumping after the volumes
currently being dumped are processed.
- 81
- Update the copy pool definition with Allow PPRCP (NO | PMNO),
or specify the ALLOWPPRCP(NO | PMNO) keyword on the FRRECOV command
and retry the recovery.
- 82
- Ensure that fast reverse restore can be used, or recover from
a dump version.
- 84
- Issue FRBACKUP for this copy pool on a system that supports the
Allow Fast Reverse Restore copy pool option.
- 88
- Issue the Fast Replication request for this version on a release
of DFSMShsm which
supports this backup version type. For a version that is an incomplete
fast reverse restore, the command may be re-issued on this host after
the incomplete restore is completed or after an FRDELETE command is
completed to delete the version in incomplete fast reverse restore
status.
- 89
- The fast replication backup command for copy pool cpname cannot
be processed in a z/OS pre-V2R1
environment. Issue the FRBACKUP command for copy pool cpname in
a z/OS V2R1 or later environment.
- 90
- Ensure multiple FlashCopy consistency
groups with source volumes in the same were not being created at the
same time.
Use the FlashCopy consistency
group option for smaller copy pools that can be backed up within the
consistency group timer value set for the logical subsystems.
- 98
- Contact IBM support.
- 99
- Resolve the cause of the abend and reissue the command.