There is one section per device.
Offsets | Name | Length | Format | Description | |
---|---|---|---|---|---|
0 | 0 | SMF74NUM | 2 | binary | Device number, in the range X'0000' to X'FFFF'. |
2 | 2 | SMF74LCU | 2 | binary | Logical control unit number, in the range X'0000' to X'FFFF'. |
4 | 4 | 1 | Reserved. | ||
5 | 5 | SMF74CNF | 1 | binary | Device indicator
|
6 | 6 | SMF74SER | 6 | EBCDIC | Volume serial of the volume mounted on this device (tape or direct access device only). |
12 | C | SMF74TYP | 4 | binary | Unit type. |
16 | 10 | SMF74NUX | 4 | binary | Number of unit control blocks (UCBs) for a parallel access volume. For HyperPAV base devices (bit 6 of SMF74CNX is set), this is the accumulated number of HyperPAV aliases. |
20 | 14 | SMF74SSC | 4 | binary | Start subchannel count. This is the number of physical requests to the device and includes SSCH and RSSCH instructions. |
24 | 18 | SMF74MEC | 4 | binary | Measurement event count (number of SSCH instructions for which connect, pending, and active times were stored). |
28 | 1C | SMF74CNN | 4 | binary | Device connect time (in 128-microsecond units). |
32 | 20 | SMF74PEN | 4 | binary | Device pending time (in 128-microsecond units). |
36 | 24 | SMF74ATV | 4 | binary | Device active time (in 128-microsecond units). |
40 | 28 | SMF74DIS | 4 | binary | Device disconnect time (in 128-microsecond units). |
44 | 2C | SMF74QUE | 4 | binary | Number of requests queued in IOS for this device. |
48 | 30 | SMF74UTL | 4 | binary | Number of samples when the device was reserved but an SSCH instruction had not been issued to the device. |
52 | 34 | SMF74RSV | 4 | binary | Number of samples taken when the device was reserved. |
56 | 38 | 4 | Reserved. | ||
60 | 3C | SMF74ALC | 4 | binary | Number of samples taken that indicated that the device was allocated. |
64 | 40 | SMF74MTP | 4 | binary | Number of samples taken that indicated a mount pending condition. |
68 | 44 | SMF74NRD | 4 | binary | Number of samples taken that indicated that the device was not ready. |
72 | 48 | SMF74COF | 2 | binary | Number of requests that had hardware timer overflow for connect time measurement. |
74 | 4A | SMF74ICT | 2 | binary | Number of incorrect samples. |
76 | 4C | SMF74DVB | 4 | binary | Device busy delay time, from subchannel information block (SCHIB) (in 128-microsecond units). |
80 | 50 | 4 | Reserved. | ||
84 | 54 | SMF74CLF | 1 | binary | DASD report control flag
|
85 | 55 | 3 | Reserved. | ||
88 | 58 | SMF74SGN | 8 | EBCDIC | Storage group name as defined by DFSMS. |
96 | 60 | SMF74NDA | 4 | binary | Total number of allocations in effect for the device. |
100 | 64 | SMF74DEV | 8 | EBCDIC | Device model name. This field is blank if device name cannot be determined. |
108 | 6C | SMF74CU | 8 | EBCDIC | Control unit name. Blank if control unit name cannot be determined. |
116 | 74 | 4 | Reserved. | ||
120 | 78 | SMF74CNX | 1 | binary | Device flag extensions:
|
121 | 79 | 1 | Reserved. | ||
122 | 7A | SMF74MTC | 2 | binary | Number of tape mounts detected against the device during the interval. |
124 | 7C | SMF74DTS | 1 | binary | Shared Device report control flag
|
125 | 7D | SMF74DCT | 28 | EBCDIC | Node descriptor ID for selfdescribing devices
(if bit 0 of SMF74SRD on). 4-byte device number in EBCDIC format left justified with trailing blanks (if bit 1 of SMF74DTS is on). |
153 | 99 | SMF74HPC | 1 | binary | Number of HyperPAV aliases configured for that LSS. |
154 | 9A | SMF74NSS | 2 | binary | Number of skipped samples caused by too large delta values. |
156 | 9C | SMF74PSM | 4 | binary | Number of successful PAV samples. |
160 | A0 | SMF74PCT | 4 | binary | Number of unsuccessful PAV counts. |
164 | A4 | SMF74CMR | 4 | binary | Command response time in units of 128 microseconds. |
168 | A8 | SMF74CAP | 4 | binary | DASD volume capacity (specified by the number of available cylinders). |
172 | AC | SMF74IDT | 4 | binary | Interrupt delay time in units of 128 microseconds. This field is zero if not supported by the hardware. |
176 | B0 | SMF74CUQ | 4 | binary | Control Unit Queuing Time. |
180 | B4 | 1 | Reserved. | ||
181 | B5 | SMF74SCS | 1 | binary | Subchannel set ID. |
182 | B6 | SMF74NM2 | 2 | binary | Device number (same as SMF74NUM). |