X line command — exclude screen output

Use the X line command to request that specific lines be suppressed from screen output. IPCS displays a statement that indicates the number of lines not being shown.

Syntax

   { X      }
   { Xn     }
   { XX-XX  }

Parameters
n

Represents a decimal number in the range of 1 through 9999.

-

Represents an inclusive number of lines.
Usage notes
- The X line command can only be entered on the dump display reporter panel.
- When entering line commands, remember to do one of the following:
  - End the line command with a delimiter character, which can be either a blank or a special character, that was not displayed in the report column following the line command.
  - Type the line command and press the ENTER key, leaving the cursor under the character following your line command.
- More than one line command can be entered at a time. For example, before you press the ENTER key, enter the D, X, and S, F, or L line commands on the same screen.

Example: The following screens depict use of the X line command and the resulting display output after pressing the ENTER key. The first screen shows using X on the dump display reporter panel.

   IPCS OUTPUT STREAM ----------------------------------------- LINE 0 COLS 1 78
   COMMAND ===>                                                 SCROLL ===> CSR
    ******************************** TOP OF DATA ********************************
        * * * *   K E Y F I E L D S   * * * *
    JOBNAME D58PXE1
        SELECTED BY: CURRENT

     ASCB: 00920200
        FWDP..... 00914E00  ASID..... 00B3      CSCB..... 00920D48
        TSB...... 00922178  AFFN..... FFFF      ASXB..... 005FDC20  DSP1..... 00
        FLG2..... 00        SRBS..... 0000      LOCK..... 00000000
        ASSB..... 01929980

     TCB: 005FDE40
        CMP...... 00000000  PKF...... 00        LMP...... FF        DSP...... FF
        TSFLG.... 00        STAB..... 005FDDF8  NDSP..... 00000000

  -----------------------------------------------------------
  |xx   JSCB..... 005FDAA4  BITS..... 00000000  DAR...... 00|
  -----------------------------------------------------------

        RTWA..... 00000000  FBYT1.... 00        STCB..... 7FFFECB0

     PRB: 005FDAD8
  ----------------------------------------------------------------------------
  |xx_ WLIC..... 00020001  FLCDE.... 00BF9458  OPSW..... 070C1000  810203A0  |
  ----------------------------------------------------------------------------
        LINK..... 015FDE40

     CDE: 00BF9458

This screen shows the result of using the X line command.

   IPCS OUTPUT STREAM ----------------------------------------- LINE 0 COLS 1 78
   COMMAND ===> _                                               SCROLL ===> CSR
    ******************************** TOP OF DATA ********************************
        * * * *   K E Y F I E L D S   * * * *
    JOBNAME D58PXE1
        SELECTED BY: CURRENT

     ASCB: 00920200
        FWDP..... 00914E00  ASID..... 00B3      CSCB..... 00920D48
        TSB...... 00922178  AFFN..... FFFF      ASXB..... 005FDC20  DSP1..... 00
        FLG2..... 00        SRBS..... 0000      LOCK..... 00000000
        ASSB..... 01929980

     TCB: 005FDE40
        CMP...... 00000000  PKF...... 00        LMP...... FF        DSP...... FF
        TSFLG.... 00        STAB..... 005FDDF8  NDSP..... 00000000
  -----------------------------------------------------------------------------
   |- - -   - - - - - - - - - - - - - - - - - - - - - - 5 LINE(S) NOT DISPLAYED|
  -----------------------------------------------------------------------------
        LINK..... 015FDE40

     CDE: 00BF9458