D line command — delete screen output

Use the D line command to permanently omit specific lines from the screen.

Syntax

   { D      }
   { Dn     }
   { DD-DD  }

Parameters
n

Represents a decimal number in the range of 1 through 9999.

-

Represents an inclusive number of lines.
Usage notes
- D can be entered on the dump display reporter panel and on the pointer panel of the BROWSE option.
- When entering line commands, remember to do one of the following:
  - End the line command with a delimiter character (either a blank or a special character) that was not displayed in the report column following the line command.
  - Type the line command and press the ENTER key, leaving the cursor under the character following your line command.
- If you request a report that is too large to be held in virtual storage all at once, use D to omit sections of the report.
- More than one line command can be entered at a time. For example, before pressing the ENTER key the D, X, and S, F, or L line commands can be entered on the same screen.

Example: The following screens depict use of the D line command and the resulting display output after pressing the ENTER key. The first screen shows using D on the dump display reporter panel.

 IPCS OUTPUT STREAM ----------------------------------------- LINE 0 COLS 1 78
 COMMAND ===>                                                 SCROLL ===> CSR
  ******************************** TOP OF DATA ********************************
      * * * *   K E Y F I E L D S   * * * *
  JOBNAME D58PXE1
     SELECTED BY: CURRENT


 ------------------
 |d4ASCB: 00920200|
 ------------------


      FWDP..... 00914E00  ASID..... 00B3      CSCB..... 00920D48
      TSB...... 00922178  AFFN..... FFFF      ASXB..... 005FDC20  DSP1..... 00
      FLG2..... 00        SRBS..... 0000      LOCK..... 00000000
      ASSB..... 01929980

   TCB: 005FDE40
      CMP...... 00000000  PKF...... 00        LMP...... FF        DSP...... FF
      TSFLG.... 00        STAB..... 005FDDF8  NDSP..... 00000000
      JSCB..... 005FDAA4  BITS..... 00000000  DAR...... 00
      RTWA..... 00000000  FBYT1.... 00        STCB..... 7FFFECB0

   PRB: 005FDAD8
      WLIC..... 00020001  FLCDE.... 00BF9458  OPSW..... 070C1000  810203A0
      LINK..... 015FDE40

   CDE: 00BF9458

This next screen shows the result of using the D line command.

 IPCS OUTPUT STREAM ----------------------------------------- LINE 0 COLS 1 78
 COMMAND ===> _                                               SCROLL ===> CSR
  ******************************** TOP OF DATA ********************************
      * * * *   K E Y F I E L D S   * * * *
  JOBNAME D58PXE1
      SELECTED BY: CURRENT

      ASSB..... 01929980

   TCB: 005FDE40
      CMP...... 00000000  PKF...... 00        LMP...... FF        DSP...... FF
      TSFLG.... 00        STAB..... 005FDDF8  NDSP..... 00000000
      JSCB..... 005FDAA4  BITS..... 00000000  DAR...... 00
      RTWA..... 00000000  FBYT1.... 00        STCB..... 7FFFECB0

   PRB: 005FDAD8
      WLIC..... 00020001  FLCDE.... 00BF9458  OPSW..... 070C1000  810203A0
      LINK..... 015FDE40

   CDE: 00BF9458
      NAME..... IEAVAR00  ENTPT.... 81B3E120

   TCB: 005FD080
      CMP...... 00000000  PKF...... 00        LMP...... FF        DSP...... FF
      TSFLG.... 00        STAB..... 005FDDD0  NDSP..... 00000000
      JSCB..... 005FDAA4  BITS..... 00000000  DAR...... 00
      RTWA..... 00000000  FBYT1.... 00        STCB..... 7FFFE890