Server specifications provide detailed information for
your server, including dimensions, electrical, power, temperature,
environment, and service clearances.
The model 9118-575 refers
to the complete system. The system consists of multiple components,
as summarized in the following table.
Table 1. Model 9118-575 components| Model |
Description |
Minimum per system |
Maximum per system |
|---|
| FC5793 |
42 EIA unit, 24-inch rack (54-inch
deep) |
1 |
1 |
| FC7945 |
Slimline door set for FC5793 rack
(front and rear) |
11 |
11 |
| FC7947 |
Acoustic door set for FC5793 rack
(front and rear) |
11 |
11 |
| 9118-575 (FC7836)3 |
8-core, 1.9 GHz processor |
1 |
12 |
| 9118-575 (FC7657)3 |
16-core, 1.5 GHz processor |
1 |
12 |
| 9118-575 (FC7675)3 |
8-core, 2.2 GHz processor |
1 |
12 |
| 9118-575 (FC7676)3 |
16-core, 1.9 GHz processor |
1 |
12 |
| Various |
Hardware Management Console (HMC)2 |
1 |
2 |
| 7045-SW4 |
HPS switch |
0 |
2 |
| FC5791 and FC5794 |
I/O drawer |
0 |
5 |
| FC6200 or FC6201 |
Optional integrated battery backup |
0 |
6 |
Note: - Either slimline doors or acoustical doors are selected during
the order process. Slimline doors do not meet the acoustic limits
for Category 1A or 1B.
- For model 9118-575,
a Hardware Management Console must be provided within the same room
and within 8 m (26 ft) of the server. Or, as
an alternative to the local HMC requirement, it is acceptable for
you to provide a supported device (such as, a PC), with connectivity
and authority to operate through a remotely-attached HMC. This local
device must be in the same room and within 8 m (26 ft) of your server,
and provide functional capability equivalent to the HMC that it replaces
and that is needed by the service representative to service the server.
- The maximum number of processors per system is the total number
of FC7836, FC7657, FC7675, and FC7676 that can be combined to a maximum
of 12.
|
Table 2. Dimensions and weight1| Physical Characteristic |
Slimline doors2 |
Acoustical doors2 |
|---|
| Height |
2025 mm (79.7 in.) |
2025 mm (79.7 in.) |
| Width |
785 mm (30.9 in.) |
785 mm (30.9 in.) |
| Depth |
1529 mm (60.2 in.) |
1885 mm (74.2 in.) |
Table 3. Weight - maximum configuration
(with 1.9 GHz processor) Single frame| With integrated battery backup and slimline
doors |
Without integrated battery backup with slimline
doors |
With integrated battery backup and with acoustical
doors |
Without integrated battery backup
and with acoustical doors |
|---|
| 1569 kg (3460 lb) |
1439 kg (3173 lb) |
1578 kg (3479 lb) |
1448 kg (3192 lb) |
Table 4. Shipping dimensions and
weight| Dimensions |
Measurement |
|---|
| Height |
2311 mm (91 in.) |
| Width |
940 mm (37 in.) |
| Depth |
1613 mm (63.5 in.) |
| Weight |
Varies by configuration |
Table 5. Electrical and thermal
characteristics (3-phase)| Rated voltage and frequency (three-phase) |
200 - 240 V ac at 50 - 60 Hz |
380 - 415 V ac at 50 - 60 Hz |
480 V ac at 50 - 60 Hz |
|---|
| Rated current, power cord with
48A plug, FC 8688 or 8689 (amperes per phase) |
48 |
-- |
-- |
| Rated current, all other power
cords (amps, per phase) |
60 |
32 |
24 |
| Maximum power |
41.6 kW |
|
| Power factor, typical |
0.99 |
0.97 |
0.93 |
| Inrush current (maximum)3 |
163 A |
|
| Thermal output |
142 kBtu/hr |
142 kBtu/hr |
142 kBtu/hr |
| Dual power feature code |
Standard7 |
|
| Branch circuit breaker and cord
information |
See Breaker rating and
cord information |
|
Table 6. Environment specifications
(based on an altitude of 1295 m (4250 ft)| Environment |
Operating |
Nonoperating |
Storage4 |
Shipping4 |
|---|
| Maximum wet bulb |
23°C (73.4°F) |
27°C (80.6°F) |
29°C (84.2°F) |
29°C (84.2°F) |
| Noncondensing relative humidity |
8 - 80 % |
8 - 80 % |
5 - 80 % |
5 - 100 % |
Table 7. Environment temperatures
(based on an altitude of 1295 m (4250 ft)| Environment |
Temperature |
|---|
| Recommended operating temperature8 |
10 - 32°C (50 - 89.6°F) |
| Nonoperating temperature |
10 - 43°C (50 - 109.4°F) |
| Storage temperature |
1 - 60°C (33.8 - 140°F) |
| Shipping temperature |
-40 - 60°C (-40 - 140°F) |
Table 8. Declared acoustical noise
emissions7| Product configuration |
Declared A-Weighted
Sound Power Level, LWAd (Bels)5, 6 |
Declared A-Weighted
Sound Pressure Level, LpAM (dB)5, 6 (bystander, 1 m) |
|---|
| |
Operating |
Idle |
Operating |
Idle |
| Small configuration: Two processors, bulk power,
and one I/O drawer; nominal conditions, slimline door set |
8.2 |
8.2 |
65 |
65 |
| Small configuration: Two processors, bulk power,
and one I/O drawer; nominal conditions, acoustical door set |
7.6 |
7.6 |
59 |
59 |
| Typical configuration: six processors, bulk
power, and one I/O drawer; nominal conditions, slimline door set |
8.67 |
8.67 |
69 |
69 |
| Typical configuration: six processors, bulk
power, and one I/O drawer; nominal conditions, acoustical door set |
7.9 |
7.9 |
62 |
62 |
| Maximum configuration: 12 processors, bulk power,
and two I/O drawers; nominal conditions, slimline door set |
8.97 |
8.97 |
727 |
727 |
| Maximum configuration: 12 processors, bulk power,
and two I/O drawers; nominal conditions, acoustical door set |
8.2 |
8.2 |
65 |
65 |
Electromagnetic compatibility compliance: This
server meets the following electromagnetic compatibility specifications:
FCC (CFR 47, Part 15); VCCI; CISPR-22; 89/336/EEC; BSMI (A2/NZS 3548:1995);
C-Tick; ICES/NMB-003; Korean EMI/EMC (MIC Notice 2000–94, Notice 2000–72);
People's Republic of China Commodity Inspection Law
Safety
compliance: This server is designed and certified to meet
the following safety standards: UL 60950-1; CAN/CSA C22.2 No. 60950-1;
EN 60950-1; IEC 60950-1 including all national differences
Table 9. Notes Notes: - For configuration weights, see Approximate system weights
by configuration
- Doors are not installed during product shipment to the customer.
- Inrush currents occur only at initial application of power (short
duration for charging capacitors). No inrush currents occur during
the normal power off-on cycle.
- When an IBM-approved vapor bag and desiccant
packets are used to protect the system, the storage specifications
are valid for 6 months and the shipping specifications are valid for
1 month. Otherwise, storage and shipping specifications are valid
for two weeks each.
- LWAd is the upper-limit A-weighted sound level; LpAM
is the mean A-weighted sound pressure measured at the 1-meter bystander
postions; 1 B = 10 dB.
- All measurements made in conformance with ISO 7779 and declared
in conformance with 9296.
- Attention: Your server installation might
be subject to government regulations (such as those prescribed by
OSHA or European Community Directives) that cover noise level exposure
in the workplace. The model 9118-575 is
available with an optional acoustical door feature that can reduce
the likelihood of exceeding noise level exposure limits for densely
populated racks. The actual sound pressure levels in your installation
will depend on a variety of factors, including the number of racks
in the installation; the size, materials, and configuration of the
room where the racks are installed; the noise levels from other equipment;
the room ambient temperature, and employees' location in relation
to the equipment. It is recommended that a qualified person, such
as an industrial hygienist or acoustical consultant, be consulted
to determine whether the sound pressure levels to which employees
might be exposed exceed regulatory limits.
- The upper limit of the dry bulb temperature must be derated 1°C
(1.8 °F) per 219 m (719 ft) above 1295 m (4250 ft). Maximum altitude
is 3048 m (10000 ft).
|
Subscribe to this information