z/OS UNIX reason codes

Value Description
0000 JROK

The return code value describes the error.

Action: Refer to the return code for information on the error.

0011 JRNotKey8

The task is not in PSW key 8.

Action: This function requires that the caller be in PSW key 8. The TCBPKF field must also have a value of 8. The request cannot be processed, because these conditions have not been met. Correct the problem and rerun the job.

0012 JRMaxChild

The maximum number of processes for this user ID has been exceeded.

Action: Ask the system programmer or system administrator to increase the MAXPROCUSER parameter of the BPXPRMxx parmlib member.

0013 JRMaxUIDs

The maximum number of OpenMVS user IDs is exceeded.

Action: Ask the system programmer or system administrator to increase the MAXUIDS parameter of the BPXPRMxx parmlib member.

0014 JRAppcErrAlloc

An APPC/MVS Allocate Conversation error occurred.

Action: An error occurred in fork during the APPC Allocate Conversation call. The conversation was not allocated. The error may be caused by one or more of the following reasons:
  • APPC is not operating.
  • The APPC scheduler is not operating.
  • The APPC scheduler is malfunctioning.
  • APPC configuration work was not done correctly when OpenMVS was installed.
Ask the operator to:
  • Verify that APPC/MVS is operating by entering a DISPLAY APPC command.
  • Verify that the APPC scheduler is operating by entering a DISPLAY ASCH command.
  • If the scheduler is operating, verify that it has been started correctly with the proper member name.

If the problem cannot be resolved by the operator, contact the system programmer.

0015 JRAppcErrSend

An APPC/MVS Send_Data error occurred.

Action: An error occurred in fork during the APPC Send_Data call. The data was not sent. The error may be caused by one or more of the following reasons:
  • APPC is not operating.
  • The APPC scheduler is not operating.
  • APPC configuration work was not done correctly when OpenMVS was installed.
Ask the operator to:
  • Verify that APPC/MVS is operating by entering a DISPLAY APPC command.
  • Verify that the APPC scheduler is operating by entering a DISPLAY ASCH command.
  • If the scheduler is operating, verify that it has been started correctly with the proper member name.

If the problem cannot be resolved by the operator, contact the system programmer.

0016 JRAppcErrRecv

An APPC/MVS Receive_and_Wait error occurred.

Action: An error occurred in fork during the APPC Receive_and_Wait call. The data was not received. The error may be caused by one or more of the following reasons:
  • APPC is not operating.
  • The APPC scheduler is not operating.
  • APPC configuration work was not done correctly when OpenMVS was installed.
  • The user security profile may not be correctly set up.
Ask the operator to:
  • Verify that APPC/MVS is operating by entering a DISPLAY APPC command.
  • Verify that the APPC scheduler is operating by entering a DISPLAY ASCH command.
  • If the scheduler is operating, verify that it has been started correctly with the proper member name.

If the problem cannot be resolved by the operator, contact the system programmer.

0017 JRAppcErrAccept

An APPC/MVS Accept_Conversation error occurred.

Action: An error occurred in fork during the APPC Accept_Conversation call. The conversation was not created. The error may be caused by one or more of the following reasons:
  • APPC is not operating.
  • The APPC scheduler is not operating.
  • APPC configuration work was not done correctly when OpenMVS was installed.
Ask the operator to:
  • Verify that APPC/MVS is operating by entering a DISPLAY APPC command.
  • Verify that the APPC scheduler is operating by entering a DISPLAY ASCH command.
  • If the scheduler is operating, verify that it has been started correctly with the proper member name.

If the problem cannot be resolved by the operator, contact the system programmer.

0019 JRAleservErr

The ALESERV macro failed.

Action: See your IBM® service representative.

001A JRStgInUse

The requested storage area has already been allocated (explicit STORAGE request).

Action: See your IBM service representative.

001B JRInitPgmErr

The initialization (INIT) program failed.

Action: See your IBM service representative.

001C JRSyseventErr

A SYSEVENT DONTSWAP/OKSWAP failure occurred.

Action: See your IBM service representative.

001D JREstaeErr

The ESTAE macro failed.

Action: See your IBM service representative.

001E JRForkExitRcParentNoRoom

Not enough work space exists for a parent fork exit.

Action: There is insufficient internal work space in the parent process for the fork service. The fork service is not performed. Fork uses internal work space to hold fork parent data, which includes the following:
  • ESTAE information
  • Vector control information (if applicable)
  • Ranges of user storage arranged by task, subpool, and key
  • Content directory elements (CDEs), link list elements (LLEs), and so on
Reduce the storage requirement of the program before rerunning the job. Consider the following possibilities:
  • Reduce the number of tasks in the same address space.
  • Release all unneeded load modules, and so on.

If the problem persists, contact the system programmer to increase the work space limit by presenting the requirement to IBM.

001F JRForkExitRcChildNoStorage

The system cannot obtain the storage needed for the child process.

Action: See your IBM service representative.

0020 JRForkExitRcParentBadEnv

An error was returned by a fork exit while processing a fork() syscall.

Action: See your IBM service representative.

0021 JRForkExitRcMiscProblem

A fork exit failure occurred due to miscellaneous problems.

Action: See your IBM service representative.

0022 JRForkVsmListError

The VSMLIST macro failed.

Action: See your IBM service representative.

0023 JRForkVsmListTooLarge

The storage is insufficient to hold VSMLIST output.

Action: There is insufficient internal work space in the parent process for the fork service. The fork service is not performed. .sp

Fork uses internal work storage to hold the VSMLIST output of all the tasks in the fork parent address space. There is insufficient work space for this fork request. .sp

Reduce the storage requirement of the program before rerunning the job. For example, reduce the number of tasks in the same address space as the fork parent. If the problem persists, contact the system programmer to raise the work space limit by presenting the requirement to IBM.

0024 JRForkRsmCopyError

The fork real storage manager (RSM) copy service failed.

Action: See your IBM service representative.

0025 JRUnexpectedErr

An unexpected error occurred.

Action: See your IBM service representative.

0026 JRKernelReady

The system is not in a ready state.

Action: Retry after OMVS has been allowed to complete initialization.

0028 JRMaxProc

The maximum number of processes was exceeded.

Action: Retry after some processes have ended, or change the maximum number of processes allowed.

0029 JRPidBad

The process ID (PID) indicates an internal error.

Action: See your IBM service representative.

002A JRPidNotFound

A find, delete, or move did not happen.

Action: See your IBM service representative.

002B JRNoSecurityProduct

A security product is not installed.

Action: A security product (for example, RACF®) is required.

002C JRBldlErr

The BLDL macro failed.

Action: See your IBM service representative.

002D JRCsvQueryErr

The CSVQUERY macro failed.

Action: See your IBM service representative.

002E JRFilesysNotThere

The file system named does not exist.

Action: The file system specified on the service could not be found.

002F JRFilesysWasReset

The file system named was reset by another user.

Action: The unmount request that specified drain was reset by another user. Try the unmount request again.

0030 JRNegativeValueInvalid

A negative value cannot be supplied for one of the parameters.

Action: Enter the call again after changing the invalid parameter to a valid value.

0032 JrUnlMountRO

The unlink call was on a read-only file system.

Action: For the file to be unlinked, the file system must be mounted in read/write mode.

0033 JRRFileWrOnly

A call tried to read a file opened as write-only.

Action: Reopen the file for read or read/write access.

0034 JRWFileRdOnly

A call tried to write to a file opened as read-only.

Action: Reopen the file for write or read/write access.

0036 JRNegFileDes

A negative file descriptor was requested.

Action: Reissue the request with a nonnegative file descriptor.

0037 JRFileDesNotInUse

The requested file descriptor is not in use.

Action: Reissue the request with an open file descriptor.

0038 JRMkDirExist

The requested file directory already exists.

Action: A directory by this name exists. The MKDIR request cannot be processed. Correct the name and retry the operation.

0039 JRPathTooLong

The pathname is too long.

Action: The pathname was found to be larger than PATH_MAX (1023). Either the name specified was too long, or the name generated as a result of using symbolic links was too long. Correct the name and retry the operation.

003A JRNullInPath

The pathname or file name contains a null.

Action: Check the pathname specified to find and remove the embedded null. If the request was for a symbolic link, there must be no nulls within the contents of the symbolic link.

003B JRNotSysRoot

A relative pathname is allowed only for processes.

Action: See your IBM service representative.

003C JRCompNotDir

A node in the pathname is not a directory.

Action: One of the components of the pathname was found to not be a directory. All but the final component of the name must be directories. Correct the pathname and retry the operation.

003D JRDirNotFound

A directory in the pathname was not found.

Action: One of the directories specified was not found. Verify that the name specified is spelled correctly.

003E JRCompNameTooLong

A component in the pathname was too long.

Action: One of the components of the pathname was found to be larger than NAME_MAX (255). Correct the pathname and retry the operation.

003F JRInvOpenFlags

The open call detected incorrect open flags.

Action: The OPEN request cannot be processed. Correct the open flags and retry the operation.

0041 JRTrNotRegFile

Truncate is valid only on a regular file.

Action: In order to truncate a file, you must specify the File_descriptor or pathname for a file, not for a directory, a FIFO, or a socket.

0042 JRClNeedClose

The closedir call was for a file that was opened with the open call.

Action: Retry the request, using CLOSE.

0043 JRPfsDead

The file system owning the file is no longer active.

Action: Retry the request with a file from another file system. If that is not possible, then re-ipl or use SETOMVS RESET= to reactivate the file system.

0044 JRMkDir

The mkdir service is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0045 JRClose

The vnode operation CLOSE is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0046 JRRdwr

Vnode operation RDWR is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0047 JRLookup

Lookup is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0048 JRForkChildErr

The fork child process returned an error code.

Action: See your IBM service representative.

0049 JRVnodGet

A cell pool get for a vnode failed.

Action: See your IBM service representative.

004A JRAppcCheckState

An APPC/MVS receive error occurred while the APPC/MVS status was being checked.

Action: An error occurred in fork during the APPC Receive_and_Wait call, which was issued after all the data had been received but before permission to send had been granted by APPC. The error may be caused by one or more of the following reasons:
  • APPC is not operating.
  • The APPC scheduler is not operating.
  • APPC configuration work was not done correctly when OpenMVS was installed.
Ask the operator to:
  • Verify that APPC/MVS is operating by entering a DISPLAY APPC command.
  • Verify that the APPC scheduler is operating by entering a DISPLAY ASCH command.
  • If the scheduler is operating, verify that it has been started correctly with the proper member name.

If the problem cannot be resolved by the operator, contact the system programmer.

004B JROpen

The open service is not supported because the file system is not locally mounted.

Action: Correct the owning system of the file system.

004C JRCreate

The create service is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

004D JRNoPath

The path length is not greater than 0.

Action: There must be a positive length passed for the pathname length.

004E JRNotActive

The OpenMVS kernel is not active.

Action: Correct the problem that caused OpenMVS to not start and re-ipl the system to get it started.

004F JRChdNotDir

The chdir, fchdir, or chroot service is valid only for directory files.

Action: Reissue the service specifying a directory file.

0050 JRChdNoEnt

The chdir or chroot service was invoked with the name of a nonexisting file.

Action: Reissue the service, specifying the name of an existing directory file.

0051 JRInvalidName

File system name characters must be greater than 40 (hex) and less than FF (hex).

Action: Reissue the request specifying a file system name that is made up of printable characters.

0055 JRMkDirROnly

The directory cannot be created in a read-only file system.

Action: The file system was mounted read-only. The mkdir service request cannot be processed.

0056 JRLnkDir

Hard links cannot be made to directory files.

Action: Use the symlink service to create a symbolic link to the desired directory.

0057 JRLskOnPipe

The lseek service cannot be performed on a pipe or socket.

Action: The lseek service must be performed on either a regular file or a directory.

0058 JRLskOffsetIsInvalid

The offset given for lseek service is incorrect.

Action: The final cursor value on an lseek call cannot be a negative number. The offset must be nonnegative if the Reference_point specified Set. If it specified Current, then the sum of the input offset and the current cursor value must be nonnegative. If it specified End, then the sum of the input offset and the cursor value of the end of the file must be nonnegative.

0059 JRLskWhenceIsInvalid

The whence given for the lseek service is incorrect.

Action: The lseek operation can specify a Reference_point of either Set, Current, or End .

005A JRFSNotStart

The file system specified was not started.

Action: The File_system_type specified must match one of the FILESYSTYPE statements in the BPXPRMxx parmlib member.

005B JRIsMounted

The file system is already mounted.

Action: Issue D OMVS,F to review the locally mounted file system. If the file system is not found and this is a shared file system configuration, issue F BPXOINIT,FILESYS=DISPLAY,ALL to determine if the file system is mounted in the shared hierarchy. If the file system must be mounted on the specified mountpoint, first unmount it, and then reissue the request.

005C JRMountPt

A problem was found with the mount point specified.

Action: The problem found depends on the return code received with this reason code.
  • If the return code is ENOENT, the pathname specified could not be found.
  • If the return code is ENOTDIR, the pathname did not specify a directory.
  • If the return code is EINVAL, either the pathname specified refers to the root of an already mounted file system. Or, in the case of a sysplex, the file system may be already mounted on another system in the sysplex or there may be conflicting BPXPRMxx statements for the root.
005D JRUnlNoEnt

The file to be unlinked does not exist.

Action: The file has either already been unlinked, or it never existed. Verify that the pathname was correct.

005E JRUnlDir

The unlink service was requested on a directory file.

Action: To remove a directory use the rmdir service.

005F JROutOfOfteCells

The system was unable to obtain a cell from the OFTE cell pool.

Action: See your IBM service representative.

0060 JRReadOnlyFileSetWriteReq

An open request for write was entered for a file system that was mounted read-only.

Action: The open service request cannot be processed. Mount the file system for read/write access and reissue the open request.

0061 JRReadOnlyFileSetCreatReq

A file cannot be created in a read-only file system.

Action: The file system was mounted read-only. The open create service request cannot be processed.

0062 JRNoFileNoCreatFlag

A service tried to open a nonexistent file without O_CREAT.

Action: The open service request cannot be processed. Correct the name or the open flags and retry the operation.

0063 JRFileExistsExclFlagSet

The file exists, but O_EXCL is specified on the open call.

Action: The open service request cannot be processed. Correct the name or the open flags and retry the operation.

0064 JRDirWriteRequest

The service tried to open a directory for write access.

Action: The open service request cannot be processed. Correct the name or the open flags and retry the operation.

0065 JROpenFlagConflict

The call tried to open a file with O_RDONLY and O_TRUNC specified.

Action: The open service request cannot be processed. Correct the open flags and retry the operation.

0067 JRParmTooLong

On the mount, a parameter field longer than 1024 was specified.

Action: Specify a parameter length less than 500 bytes.

0068 JRRemove

Vn_Remove is not supported by the physical file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0069 JRBothMode

On the mount service, both read and read/write were specified.

Action: The Mount_mode on a mount service cannot specify both read/write and read-only.

006A JRNeitherMode

On the mount service, neither read nor read/write were specified.

Action: The Mount_mode on a mount service must specify either read/write or read-only.

006B JRBuffTooSmall

The buffer for return information is too small.

Action: The length of the buffer specified on the service was not large enough to contain the data to be returned.

006C JRFileNotThere

The requested file does not exist.

Action: The service cannot be performed unless the named file exists.

006D JRReadDir

The readdir service vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

006E JRGetAttr

GetAttr is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

006F JROutOfVFSCells

The system is unable to obtain a cell from the VFS cell pool.

Action: See your IBM service representative.

0070 JRRddFileNotDir

The readdir service request was on a file that was not opened as a directory.

Action: Use the opendir service to open the directory.

0071 JRTargetNotDir

The opendir service did not specify a directory.

Action: The opendir service request cannot be processed. Correct the name and retry the operation.

0072 JROpenDirNotFound

The directory specified on the opendir service did not exist.

Action: The opendir service request cannot be processed. Correct the name and retry the operation.

0073 JRNotPRB

The current request block is not a program request block.

Action: Issue the service from a program request block (PRB).

0075 JRSpFileExists

The file specified on the mknod service already existed.

Action: A file by this name exists. The mknod service request cannot be processed. Correct the name and retry the operation.

0076 JRReadOnlyFileSetMknodReq

A special file cannot be created on a read-only file system.

Action: Specify another file system or unmount and then remount the current file system.

0077 JRRmDir

The rmdir service vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0078 JRPathNotDir

The pathname does not specify a directory.

Action: The service requested requires a directory, but the pathname passed is not for a directory.

0079 JRReadOnlyFS

This operation does not work on a read-only file system.

Action: The service was requested for a file system that was mounted read-only. The service requires that the file system be mounted read/write.

007A JRDirInUse

The requested directory is in use.

Action: See your IBM service representative.

007B JRDiffFileSets

The rename service is not supported across file systems.

Action: The rename service cannot be performed across file systems. Rename the file, specifying a new name within the same file system.

007C JRNewNotDir

The new name specified on the rename service is not a directory.

Action: If a directory is to be renamed to an existing filename, that filename must refer to a directory file.

007D JRNewIsDir

The new name specified on the rename service is a directory.

Action: If a nondirectory is to be renamed to an existing filename, that filename must not refer to a directory file.

007E JROldNoExist

The old name specified on the rename service does not exist.

Action: The file to be renamed does not exist. Reissue the request with an existing filename.

007F JRIsFSRoot

The name specified is in use as a file system root.

Action: The function cannot be performed on the root of the file system. Unmount drain is not permitted for root.

0080 JRRename

The rename service vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0081 JRTermReq

The termination request does not point to PPRP or PPRT.

Action: See your IBM service representative.

0082 JRDotOrDotDot

The requested function cannot be performed against dot (.) or dot-dot (..).

Action: Neither dot (.) nor dot-dot (..) can be specified for this operation.

0083 JRKernelDown

The kernel has ended during this service.

Action: OpenMVS ended during this service. Ask the operator to enter the command to start OpenMVS. Then reissue the failing service.

0084 JRInternalError

An internal error was detected.

Action: See your IBM service representative.

0086 JRBadEntryCode

An incorrect entry code was specified on this request.

Action: A command code or entry code specified on the request is not correct. Reissue the command using a valid command code.

0088 JRFdAllocErr

An error occurred while trying to allocate a file descriptor page.

Action: Close any file descriptors that are no longer needed.

008A JRBytes2RWZero

The number of bytes requested to read or write is negative.

Action: Specify a positive number for the number of bytes to be read or written.

008B JRRwdFileNotDir

The rewinddir service was on a file that is not a directory.

Action: The rewinddir service requires that the file descriptor passed on input refer to a directory.

008C JRRootNode

The requested operation cannot be done on a root.

Action: The function was requested for a file system root, but it cannot be done on a root.

008D JRInvalidSignal

A signal number specified is incorrect.

Action: Reissue the request with a valid signal number.

008E JRInvalidSigAct

The action is incorrect for the specified signal.

Action: Reissue the request with a valid signal action.

008F JRInvalidSigHow

The how operand specified is incorrect.

Action: Reissue the request with a valid how operand.

0090 JRNotForDir

The system cannot perform the requested function on a directory.

Action: The problem could be:
  • The file descriptor specified refers to a directory opened with opendir() service, and the request is not valid for such a file descriptor. Reissue the request specifying a nondirectory file descriptor.
  • The file specified is a directory, and the request is not valid for such a file. Reissue the request specifying a nondirectory file.
0091 JROldPartOfNew

The old name specified on the rename service is part of the new name.

Action: Reissue the rename request, specifying a new name that does not contain the old name.

0092 JRParmBadSyntax

A parmlib parameter has a syntax error.

Action: See your IBM service representative.

0093 JRParmLibIOError

An I/O error occurred in reading parmlib.

Action: See your IBM service representative.

0094 JRParmLibOpenFailure

A parmlib data set cannot be opened.

Action: See your IBM service representative.

0095 JRParmLibNotFound

A parmlib member could not be found.

Action: See your IBM service representative.

0096 JRParmLibBadData

A parmlib member contains incorrect data.

Action: See your IBM service representative.

0097 JRParmLibNoAccess

A parmlib data set cannot be accessed at this time.

Action: See your IBM service representative.

0098 JRParmBufNoStorage

Storage could not be obtained for the parameter buffer.

Action: See your IBM service representative.

009A JRPgserError

The page service (PGSER) failed.

Action: See your IBM service representative.

009C JRTrOpenedRO

The ftruncate service was for a file opened in read-only mode.

Action: In order to be able to truncate a file, open it for write.

009D JRTrMountedRO

The ftruncate service was for a file on a file system mounted in read-only mode.

Action: In order to truncate a file, it must not be on a file system that has been mounted in read-only mode.

009F JRTrNegOffset

A negative offset was given to a file truncate service.

Action: To truncate a file, specify a nonnegative File_length.

00A0 JROutOfLocks

The file system has run out of locks.

Action: When a file system lock was requested, there were no more left in the system. Try again later.

00A1 JRMount

The mount service VFS operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

00A2 JRUMount

The unmount service VFS operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

00A3 JRSync

The Sync VFS operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

00A4 JRRoot

The Root VFS operation is not supported.

Action: See your IBM service representative.

00A5 JRStatFS

The StatFS VFS operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

00A6 JRFID

The Get Fid VFS operation is not supported.

Action: See your IBM service representative.

00A7 JRVget

The VGet VFS operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

00A8 JRInvalidVnode

The vnode returned is not valid.

Action: See your IBM service representative.

00A9 JRInvalidParms

An incorrect combination of parameters was specified.

Action: The actual problem depends on the service.
  • For a w_getmntent service, the entire header area must be zeroed before the first call, and the contents of the header area should not be modified by the caller between calls to this callable service.
  • For a mount service, Mount_mode must not specify any values unrelated to a mount service.
  • For an unmount service, Flags must not specify any values unrelated to an unmount service, and must not specify mutually exclusive requests.
  • For an unquiesce service, Unquiesce_parms must not specify any values unrelated to an unquiesce service.
  • For a quiesce service, File_System_Name must belong to a file system that is either mounted, or could be mounted.
  • For tcsetcp, either a reserved flag bit is set or one of the code page names is not null-terminated.
00AA JRFsParentFs

The file system has file systems mounted on it.

Action: An unmount request can be honored only if there are no file systems mounted anywhere on the requested file system. Use the F BPXOINIT,FILESYS=DISPLAY,ALL command for a shared file system configuration or the D OMVS,FILE command for a non-shared file system configuration to determine which file systems are mounted on the requested file system. Unmount them before retrying this request. Also check the system log for message BPXF271I, which will identify the first mounted file system found.

00AB JRFsUnmountInProgress

An unmount service is already in progress.

Action: The file system named is being unmounted.

00AC JRFsMustReset

An unmount service must specify reset when already unmounting.

Action: In order to unmount immediately, the previous unmount with drain must be reset.

00AD JRFsForceUmount

Reset fails when the file system is forced to unmount.

Action: A reset unmount request will reset only a file system that was unmounting with the drain option.

00AE JRAudit

The audit vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

00AF JRLockErr

The file system had a lock error.

Action: See your IBM service representative.

00B0 JRUserNotPrivileged

The requester of the service is not privileged.

Action: The service requested required a privileged user. Check the documentation for the service to understand what privilege is required.

00B1 JRUnexpectedError

An unexpected return value was received.

Action: See your IBM service representative.

00B2 JRMustUmountImmed

An immediate unmount must precede a forced unmount.

Action: Try an immediate unmount before forcing an unmount. A forced unmount can cause data to be lost.

00B3 JRNotQuiesced

A quiesce service must precede an unquiesce.

Action: An unquiesce request was received for a file system that was not previously quiesced.

00B4 JRQuiesced

There was a previous quiesce request.

Action: The file system required for the current function has been quiesced. After the file system has been unquiesced, retry this service.

00B5 JRInvalidRequester

The requester of the function cannot make the request.

Action: The same process that issued the quiesce must also issue the unquiesce, unless force is specified in the Unquiesce_Parms.

00B6 JRPfsSuspend

The PFS is waiting to restart.

Action: If there is a WTOR prompt on the operator console the PFS will be restarted when the reply is issued. Otherwise, the PFS will be restarted by its own procedures. Close and reopen the socket or file descriptor and retry the request again after the PFS is active. This value may also be returned if there is a configuration problem and the address space is not connected to the proper PFS.

00B7 JRPfsAbend

The physical file system abended.

Action: The file system owning the file abended on the last request. Report this to support personnel. Try the request again, or try it with a file on another system.

00B8 JRNoStorage

Insufficient storage to copy user parameters.

Action: Storage cannot be obtained to make a copy of the passed user parameters. This can be caused by one of the following conditions:
  • The user region is filled up and the ?STORAGE request cannot be satisfied.
  • There is an error in one of the passed user parameters, causing a ?STORAGE request for a huge amount of storage that cannot be satisfied.

Check for incorrect input parameters passed to the service. If the parameters are correct, consider increasing the user REGION size.

00B9 JRActiveProcess

Multiple processes in the address space prevent the termination of the job step process.

Action: The BPX1MPC service was called from the job step thread while other processes were active in the address space. The request could not be satisified. The caller should end or clean up all other processes in this address space prior to calling BPX1MPC from the job step thread.

00BA JRPfsctl

The Pfsctl operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

00BB JRPfsInitFailed

The file system did not initialize.

Action: Determine why the PFS was unable to initialize and then restart it.

00BC JRSpawnNoCommonStg

Spawn cannot be completed because not enough common storage is available to complete the request.

Action: The system is probably experiencing a common storage shortage and the request cannot be satisfied until the shortage is corrected.

00BD JRSpawnArgsTooBig

Spawn cannot be completed because the total length of arguments specified by the caller exceeds the system imposed limit of 1&finespace;000&finespace;000 bytes.

Action: The spawn service detected that the length of the argument lists specified by the caller is larger than the system-imposed maximum of 1&finespace;000&finespace;000 bytes. Correct the argument length and resubmit the job.

00BE JRFuncUndefined

The oe_env_np (BPX1ENV) service cannot be completed because the Function_code specified is undefined.

Action: Reissue the service with a defined Function_code.

00BF JRBadArgCount

The oe_env_np (BPX1ENV) service cannot be completed because the number of input or output arguments are incorrect for the Function_code specified.

Action: Reissue the service with the correct number of input and output arguments appropriate for the Function_code.

00C0 JRBadInputValue

The oe_env_np (BPX1ENV) service cannot be completed because an input argument contained an undefined value.

Action: Reissue the service with input value(s) defined for the specified Function_code.

00C1 JRNoUserExit

A pthread_quiesce (BPX1PTQ) service FREEZE_EXIT request cannot complete because no user exit has been registered with the oe_env_np (BPX1ENV) service.

Action: Use the oe_env_np (BPX1ENV) service, function code of Freeze_Exit to register a user exit, before using the pthread_quiesce service with a quiesce type of FREEZE_EXIT.

00C2 JRProcessNotFrozen

A pthread_quiesce (BPX1PTQ) service FREEZE_EXIT request cannot complete because the process is not frozen.

Action: Use the pthread_quiesce service with a quiesce type of Freeze before using the pthread_quiesce service with a quiesce type of FREEZE_EXIT.

00C3 JRFreezeExitTooSlow

A pthread_quiesce (BPX1PTQ) service FREEZE_EXIT request cannot complete because user exits did not return in the expected time.

Action: Examine the user exits to determine why they might hang. The user exits should not be issuing any syscalls or waits.

00C4 JRResrPortSpecified

During a Socket Bind request, a Reserved Port was incorrectly specified.

Action: Change the port requested in the Socket Bind request to a non-reserved port. The reserved ports are found in the NETWORK parmlib statement in the BPXPRMxx member.

00C5 JRResrPortNotAvail

All port zero, INADDR_ANY, reserved ports are in use.

Action: The system programmer must increase the number of ports that are available by specifying a larger number on the INADDRANYCOUNT parameter of the NETWORK parmlib statement in the BPXPRMxx member, and the appropriate parameter for each Transport Provider. An ipl will be required.

00C6 JRResrPortUsed

A sockets port assignment conflict exists between OMVS and a Transport Provider.

Action: The system programmer must make sure the same port numbers specified with the INADDRANYPORT and INADDRANYCOUNT parameters on the NETWORK parmlib statement in the BPXPRMxx member match the port numbers specified on the Transport Providers connected to OMVS. An IPL is required if any changes are made.

00C7 JRTLSRequestInvalid

An invalid request has been passed for task level security.

Action: The value passed must be either TLS_CREATE_THREAD_SEC# or TLS_DELETE_THREAD_SEC# as defined in BPXYCONS.

00C8 JRNoReservedPorts

A bind() syscall that specified port number zero and IP address INADDR_ANY, failed because no ports were reserved.

Action: Use the INADDRANYPORT and INADDRANYCOUNT parameters on the NETWORK parmlib statement to reserve these ports. An ipl is required if any changes were made.

00C9 JRTLSIDTypeInvalid

An invalid ID type has been passed for task level security.

Action: The value passed must indicate a valid ID type as defined in BPXYCONS.

00CA JRTLSIDLengthInvalid

An invalid ID length has been passed for task level security.

Action: The value passed must be in a range appropriate for the field type.

00CB JRTLSAddressLengthInvalid

An invalid address length has been passed for task level security.

Action: The value passed must be in a range appropriate for the field type.

00CC JRTLSCallerIsIPT

The calling task is IPT.

Action: The task level security request is ignored.

00CD JRTLSNotDoneByOE

Task level security already exists, but it was not created by a previous call to pthread_security_np.

Action: The task level security request is ignored.

00CE JRNoPtraceTaskSec

Ptrace is active in the caller’s address space, task level security not allowed concurrently with Ptrace.

Action: The caller requested to create or delete task level security.

00CF JRSAFResourceUndefined

The resource specified by the caller is not defined to RACF.

Action: Define the specified resource to RACF or correct the resource name and retry.

00D0 JRSAFParmListErr

A SAF service was unsuccessful because an error was detected by SAF in the parameter list.

Action: See your IBM service representative.

00D1 JRSAFNoUUIDtoUser

No mapping to a RACF userid exists for the DCE UUID specified.

Action: Define the DCE UUID to RACF and retry the service.

00D2 JRSAFNoUsertoUUID

No mapping to a DCE UUID exists for the RACF Userid specified.

Action: Define a DCE UUID for the RACF Userid and retry the service.

00D3 JRSAFNoDCEClass

The RACF DCEUUIDS class is not active.

Action: Activate the DCEUUIDS class via the RACF SETROPTS command.

00D4 JRSAFNoCellUUID

The local cell UUID could not be determined for this RACF userid to DCE UUID conversion request.

Action: Define a local cell UUID for the specified RACF userid.

00D5 JRClassLenErr

The length of the RACF class name is outside of the allowable range of 1 to 8.

Action: Correct the class name length and retry.

00D6 JREntityLenErr

The length of the RACF entity name is outside of the allowable range of 1 to 246.

Action: Correct the entity name length and retry.

00D7 JRAccessUndefined

The access type specified is undefined.

Action: Correct the access type and retry.

00D8 JRNotServerAuthorized

The calling address space is not permitted to the BPX.SERVER Facility class or the BPX.SERVER Facility class is undefined and caller not a superuser (UID=0).

Action: Permit the caller's process to the BPX.SERVER Facility class or make the caller a superuser (UID=0).

00D9 JRNoResourceAccess

The user specified by the caller does not have the access specified to the resource.

Action: If the user requires access to the resource, have an authorized user grant the user access permission.

00DA JRSurrogateUndefined

The RACF SURROGAT class has not been activated or no SURROGAT class profile has been defined for the client.

Action: Activate the RACF SURROGAT class and perform the necessary RACF definitions for non-password clients. See

00DB JRNoSurrogatePerm

The server is not permitted to the SURROGAT class profile defined for the client.

Action: Permit the server to the SURROGAT class profile defined for the client. See z/OS UNIX System Services Planning for details.

00DC JRSAFNotAuthorized

The calling address space is not authorized to use this service.

Action: Read the documentation for this service and note its authorization requirements. The action depends on which of the following services was invoked:
  • RACF callable services: Permit the user associated with the address space level identity to the IRR.RDCERUID Facility class profile with READ access.
  • z/OS® Communications Server Network Management Interface: Permit the user associated with the address space level identity to the profile for the service. See the z/OS Communications Server: IP Programmer's Guide and Reference for the name of the profile supported by the service.
00DD JRNoBufStorage

Storage could not be obtained for I/O buffers.

Action: Allocate more storage to the operation

00F6 JRNoVsmList

Fork cannot be completed because the parent process ended prematurely.

Action: Correct the condition that caused the parent process to terminate and retry the fork.

00F7 JRForkNoResource

Fork cannot be processed for lack of resource.

Action: The fork service was unable to create the child process due to a lack of system resources. The most likely cause is the lack of auxiliary, pageable, or virtual storage. The syslog can be searched for messages reflecting these specific conditions, including messages IRA100E IRA200E IRA400E or IEA602I.

00F8 JRSWAREQ

The SWAREQ macro failed.

Action: See your IBM service representative.

00F9 JRSAFNoUser

The user ID is not defined to the security product.

Action: Define the user ID to the security product.

00FA JRSAFGroupNoOMVS

The current group does not have a GID defined in the OMVS segment.

Action: Create an OMVS segment with a GID.

00FB JRSAFUserNoOMVS

The user ID is not authorized to use OMVS.

Action: Create an OMVS segment with a UID.

00FC JRSAFNoUID

The user ID has no UID.

Action: Create an OMVS segment with a UID.

00FD JRSAFNoGID

The user ID is in a group that has no GID.

Action: Create an OMVS segment and assign a GID to the group.

00FE JRSAFInternal

An internal error occurred in the security product.

Action: Follow local procedures for reporting internal errors in the security product.

00FF JRStatusPosted

A request was received to dub a thread for a process that is stopped or has ended.

Action: Return to the operating system and allow the process to be cleaned up.

0100 JRTrunc

Vnode operation trunc is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0101 JRFsync

Vnode operation fsync is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0102 JRSetAttr

Vnode operation setattr is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0103 JRSymFileAlreadyExists

The file requested for creation as a symbolic link already exists.

Action: The link name specified on a symlink service request is an existing filename. Reissue the request specifying a link name that does not already exist.

0104 JRSymlink

The symbolic link vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0105 JRFileNotSymLink

The file requested for readlink service is not a symbolic link.

Action: Reissue the readlink service request specifying a symbolic link.

0106 JRReadlink

The readlink vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0107 JRMknodInvalidType

The mknod service invoked with incorrect file type parameter.

Action: The type specified in the mknod service is not supported. The service cannot be processed. The mknod service accepts only FT_CHARSPEC and FT_FIFO. See BPXYFTYP. Correct the type parameter and retry the operation.

0108 JREndingSlashMknod

The pathname ended with a slash on the mknod service.

Action: The pathname specified for a mknod service request ended with a slash.

The service request cannot be processed. Correct the name and retry the operation.

0109 JREndingSlashOCreat

The pathname in the open service, with the O_CREAT option, ended with slash.

Action: The open service request cannot be processed. Correct the name and retry the operation.

010A JRLnkNoEnt

The service tried to link to nonexistent file.

Action: Use the open service to create the file, or reissue the request specifying an existing filename.

010B JRLnkNewPathExists

The service tried to add a link whose name already exists.

Action: Reissue the request, specifying a new pathname that does not already exist.

010C JRLnkAcrossFilesets

The service tried to link across file systems.

Action: Reissue the request, specifying a new pathname that is within the same file system as the existing pathname.

010D JRLnkROFileset

The service tried to add a directory entry on a read-only file system.

Action: To create a link to the existing pathname, the file system must be mounted in read/write mode.

010E JRLink

Vn_Link is not supported by this physical file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

010F JRExecNmLenZero

The length of the executable name passed was zero.

Action: The parameter specifying the length of the program name to be run contained zero. Correct the program name length and resubmit the job.

0111 JRParmlibSuffixTooLong

The parmlib member name suffix is more than two characters.

Action: See your IBM service representative.

0112 JRFsFailStorage

Dub or fork failed due to unavailable file system storage.

Action: See your IBM service representative.

0113 JRFsFailQuiesce

Dub or fork cannot complete, because the working directory is unmounted.

Action: The initial working directory exists in a file system that is being quiesced in preparation for being unmounted. Select another initial working directory, or reissue the request after the file system has been mounted again.

0114 JRNotPermitted

You are not permitted to signal to the specified process ID (PID).

Action: Reissue the request specifying a PID that you are authorized to send a signal to, or reissue the request from a superuser ID.

0115 JRBuffLenInvalid

The length of the buffer is less than or equal to zero or less than a minimum length.

Action: The buffer length specified for this request was a negative number, zero, or less than a minimum length. Retry the request specifying a valid buffer length parameter.

0117 JRNotRegistered

The call is not registered for signals.

Action: Reissue the request after registering the task for signals with the BPX1MSS service.

0119 JRNotSupportedForFileType

The requested service is not supported for this file type.

Action: Reissue the request, specifying a file of the correct type for the request.

011A JRInvalidSymLinkLen

The contents specified for the symbolic link has an incorrect length.

Action: Reissue the symlink request specifying a path length greater than zero, but less than or equal to 1023.

011B JRInvalidSymLinkComp

The contents specified for symbolic link has an incorrect component.

Action: The contents of a symbolic link must consist of components whose length cannot exceed 255 characters.

011C JRFileNotOpen

The file is not opened.

Action: Reissue the request specifying an open file descriptor.

011D JRTooManySymlinks

Too many symbolic links were encountered in the pathname.

Action: While attempting to resolve the input pathname, more than 100 symbolic links were found.

011E JRMVSArgTooBig

The execMVS argument string was too long.

Action: The execMVS service detected that the length of the argument list specified by the caller is larger than the system-imposed maximum of 4096 bytes. Correct the argument length and resubmit the job.

011F JRExecNotRegFile

The filename specified on the exec is not a regular file.

Action: The exec service detected that the filename specified by the pathname argument is not a regular type file. Correct the pathname argument and resubmit the job.

0120 JRAppcErrRecvIncomp

An APPC/MVS Receive_and_Wait error occurred. The data is incomplete.

Action: An error occurred in fork during the APPC Receive_and_Wait call. Incomplete data was received. If the problem recurs, contact the system programmer.

0121 JRForkNoAccess

The call tried an unauthorized access to a fork child transaction program.

Action: The fork child process determined that the fork child transaction program has been invoked improperly, perhaps due to unauthorized access to the program. The transaction program name for fork child is 30F0F7F8 .

0122 JRInactive

The vnode operation inactive is not supported by the file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0123 JRInvalidMajorNumber

Character special file system detected an incorrect device major number.

Action: This character special file is not supported by any device drivers installed on this system. The request cannot be processed. Correct the pathname and retry the request.

0124 JROutofPnodeCells

No pnode/pnwt cells are available.

Action: See your IBM service representative.

0125 JRRdandWRTforPipe

The open call on a pipe was for read/write.

Action: The request cannot be processed. Correct the open flags and retry the request.

0126 JRQueueManPutFailed

The queue manager returned an incorrect return code.

Action: See your IBM service representative.

0127 JRQueueManGetFailed

The queue manager returned an incorrect return code.

Action: See your IBM service representative.

0128 JROpenforWriteNoReaders

Open for write was done before any open for read.

Action: Open for write was requested while file flags indicated O_NONBLOCK and before any open for read. The request cannot be processed. An open for read request must precede an open for write request.

0129 JRNoReaders

The service tried to write before any open for reads.

Action: An open for read must be performed.

012A JRInvParmLength

The parameter length is incorrect or negative.

Action: Check for incorrect input parameters passed to the service. One of the following conditions may have occurred:
  • The specified length of a variable-length parameter is negative. (This error is applicable only to programs issuing callable services through the assembler interface.) The length of a variable-length parameter cannot be negative. Services with variable-length parameters normally specify them in pairs. The first of the pair specifies the length of the variable-length parameter that comes next.
  • The length of a fixed-length parameter exceeds the allowable value. The maximum length of any fixed-length parameter cannot exceed 5000 bytes.
  • The size of an input buffer to be used for holding an output variable length parameter is specified as more than 5000 bytes. The actual maximum size of the parameter is much less. This error is reported for performance reasons, to avoid inefficient usage of system resources, including storage and processing time. Specify a smaller size for the input buffer.
  • If this error is returned by one of the z/OS Communications Server Real-time application-controlled TCP/IP trace NMI requests, then one of the following errors occurred:
    • The specified length of the input buffer is shorter than the size of the input RCCHeader structure.
    • For the RCCOpen request, the specified length of the input buffer is shorter than the size of the input RCCHeader and RCCOpenInfo structures.
012B JRForkAbend

The program abended in the fork module.

Action: See your IBM service representative.

012C JRForkExitAbend

An abend occurred in a fork exit.

Action: See your IBM service representative.

012D JRSyscallAbend

An abend occurred in a system call.

Action: See your IBM service representative.

012E JRBadAddress

An incorrect address was encountered when the system tried to access data.

Action: An error occurred while the system was accessing the user data. Check for incorrect input parameters passed to the system call.

012F JRL16Jump

An unexpected error occurred in load 16 and jump.

Action: See your IBM service representative.

0130 JRSigDuringWait

A signal occurred during a wait.

Action: While the service was waiting, a signal was received to interrupt it.

0131 JRQueueManOpenFailed

The queue manager was unable to create a queue.

Action: See your IBM service representative.

0132 JRQueueManCloseFailed

The queue manager returned a nonzero return code on a close service.

Action: See your IBM service representative.

0133 JRRdnorWRTforPipe

The open service on a pipe was for neither read nor write.

Action: The request cannot be processed. Correct the open flags and retry the service.

0134 JROutofVnodeCells

No vnode cells are available.

Action: See your IBM service representative.

0135 JRNoData

There is no data in this pipe.

Action: Try this service again later.

0136 JRUserNotAuthorized

The user is not authorized for the requested file descriptor.

Action: When the specified file descriptor was opened, the user was executing in an authorized state. However, the user is now no longer authorized to use this file descriptor. Reissue the request, specifying a file descriptor to which the user has authority.

0138 JRFileIsBlocked

The file is blocked.

Action: The request cannot be processed. Try again later.

0139 JRIoctl

The ioctl service is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

013A JRInvalidPid

The process ID (PID) was not found, so the signal was not sent.

Action: The target PID was either ended, or it never existed. Retry the function with an existing PID.

013B JRVfsIoctl

The Vfsioctl service is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

013C JRInvRbState

Callable services cannot be nested.

Action: The system detected a nested callable service. That is, a request block (RB) issued a callable service and was interrupted by an interrupt request block (IRB) in an STIMER exit. Any additional callable services that the RB tries to issue are detected and flagged as errors. Correct the problem and resubmit the job.

This error might also be caused by repeated abends from recovery processing. If z/OS UNIX cannot successfully clean up resources, no further syscalls will be allowed on the task.

013D JRWrongInstance

The process is not known to current kernel instance.

Action: The kernel was refreshed. That is, OpenMVS has been stopped and restarted. Either issue a call to BPX1MPC (the MVS™ process cleanup) to clean up the process before issuing another service request, or end the job.

013E JRVfsInact

The InAct VFS operation is not supported.

Action: See your IBM service representative.

013F JRInvTermStat

An incorrect process termination status was passed to BPX1MPC.

Action: Structure BPXYWAST describes the valid terminating status.

0140 JRActiveThreads

The process could not be terminated because there are multiple threads still running in the process.

Action: The BPX1MPC service was called from the initial thread while other threads were active in the process. The request could not be satisfied. The caller should end or clean up all other threads before calling BPX1MPC from the initial thread.

0141 JRBadExitStatusAddr

An incorrect exit status address was passed to the wait call.

Action: Reissue the call to the wait service (BPX1WAT) with an exit status return area address that is accessible to the caller.

0142 JRWaitError

An unexpected error occurred in the wait service.

Action: See your IBM service representative.

0143 JRProcessEnding

The current process is ending.

Action: New services cannot be issued until this termination is complete.

0144 JRSignalsNotBlocked

The service did not complete because signals are not blocked.

Action: This service can be run only if all signals are blocked.

0145 JRFdTooBig

The requested file descriptor exceeds the Open_max limit.

Action: Reissue the request, specifying a file descriptor that does not exceed the Open_max limit.

0146 JROpenMax

The maximum number of open files for this process was reached.

Action: Close any file descriptors that are no longer needed.

0147 JRBadUidtSlot

The slot passed to BPXPRCHK is not a valid index for the UIDT table.

Action: See your IBM service representative.

0148 JRResMgr

The RESMGR macro returned a negative status.

Action: See your IBM service representative.

0149 JRIOBufLengthInvalid

The input argument buffer length was incorrect.

Action: The argument length specified for this request was either a negative number, or was greater than 51200. Reissue the request and specify a valid argument length parameter.

014A JRInvalidAmode

An incorrect access mode was specified on the access service.

Action: The access mode specified on the access service has unsupported bits turned on. Reissue the request and specify a valid access mode.

014B JRAccess

The access vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

014C JRUIDchanged

The slot passed to BPXPRCHK is not valid for the UID specified.

Action: See your IBM service representative.

014D JRFsFailChdir

The dub failed, due to an error with the initial home directory.

Action: There is a problem with the initial home directory. Verify that the initial home directory exists and that the user has authorization to it.

014E JRFsFailLock

The dub failed, due to an error getting necessary file system locks.

Action: See your IBM service representative.

014F JRUpdateUidtFailure

The update to UIDT in BPXPRCHK failed.

Action: See your IBM service representative.

0150 JRBadAuditOption

An incorrect option code was specified for the chaudit service.

Action: Reissue the request and specify a valid audit option code.

0151 JRExecFileTooBig

The size of the specified file exceeds the private region of the caller.

Action: The exec service detected that the size of the executable to be run exceeds the size of the caller's private region.

0152 JRInvalidCursor

The cursor value passed to the w_getmntent call is incorrect.

Action: Before the first call to w_getmntent, the header area of the buffer must be zero, and the contents of the header area should not be modified by the caller between calls to this callable service.

0153 JRPtySlaveOpened

The open of the master pseudo-TTY failed, because the associated slave pseudo-TTY is still open.

Action: This may be a common system condition. One or more processes from a previous pseudo-TTY connection are processing and using the slave pseudo-TTY file. When all the processes close, the master-slave pseudo-TTY pair is again available for use. Choose another pair of pseudo-TTY files. Alternatively, kill all the processes that are using the slave pseudo-TTY file and reattempt the open service.

0154 JRPtyMinorInvalid

The device minor number is larger than the MAXPTYS parameter in the BPXPRMxx member.

Action: Contact the system programmer or system administrator to either redefine the master and slave pseudo-TTY file pair to have a device minor number less than or equal to the MAXPTYS parameter of the BPXPRMxx parmlib member, or increase the value for MAXPTYS.

0155 JRPtyAlreadyActive

The device minor number is already active.

Action: This may be a common system condition. This error generally indicates that the master pseudo-TTY file specified is in use by another process. Choose another master pseudo-TTY file.

0156 JRSignalReceived

The call was interrupted by a signal.

Action: A signal was received while this callable service was blocked. Retry the service if appropriate.

0157 JRPtyDifferentUID

The process UID is different from the UID of the process that opened the master pseudo-TTY.

Action: The UID of the first process that opens the slave pseudo-TTY file must be the same as the effective UID of the process that opened the corresponding master pseudo-TTY file. Recode the application so the open of the slave pseudo-TTY file occurs from a process having the same effective UID as the process that opens the corresponding master pseudo-TTY file.

0158 JRPtyMasterClosed

There is no corresponding master pseudo-TTY file open.

Action: The application should be coded so the master pseudo-TTY is opened prior to the corresponding slave pseudo-TTY file. .sp

This may also be a result of a temporary system condition: A pseudo-TTY connection was established, and a slave pseudo-TTY open occurred after the pseudo-TTY connection was severed (due to the master pseudo-TTY file being closed). In this case, all file descriptors associated with the slave pseudo-TTY must be closed before the master-slave pseudo-TTY files for this device minor number can be reused.

0159 JRPtyDifferentFile

A slave pseudo-TTY file for this minor number with a different filename is already open.

Action: Only one slave pseudo-TTY file should be defined for this device minor number. Contact the system administrator or system programmer to correct the definition of this file.

015B JRPtySlaveNotInit

The slave pseudo-TTY support did not complete successfully.

Action: Contact the system administrator or system programmer to determine why the slave pseudo-TTY support did not initialize correctly.

015C JRPtyInputStopped

The nonblocked write failed, because input is stopped.

Action: Input has been stopped by a tcflow service. Issue a tcflow to start input back up and reissue the read.

015E JREOFAlreadySent

The write to the master pseudo-TTY failed, because all slaves are closed and HUPCL was set.

Action: An attempt was made to send some data on the master after all slave file descriptors were closed and HUPCL set.

0160 JRPtyOrphanedWrite

The write service is processing in a background, orphaned process group.

Action: This condition most likely occurs when a process that is forked from the session leader (generally the shell) attempts to write to the pseudo-TTY device after the session leader process has ended. The process cannot read from or write to the terminal once the session leader process ends. This pseudo-TTY session is no longer usable. Restart the application from another session.

0161 JRPtyOutputStopped

Write cannot be processed, because output has stopped.

Action: Output was stopped by a tcflow service or entry of the STOP character. Issue a tcflow or enter a START character to start output back up and reenter the read.

0163 JRPtyNoData

Data or room is not available on the queue.

Action: For input, no data is available on the queue. For output, no room is available on the queue. For writes to a master pseudo-TTY, this includes the case of a full output queue when echoing is active. Reissue the request again later.

0164 JRPtyOrphanedRead

The read service is processing in a background, orphaned process group.

Action: This condition most likely occurs when a process that is forked from the session leader (generally the shell) attempts to read from the pseudo-TTY device after the session leader process has ended. The process cannot read from or write to the terminal once the session leader process ends. Reissue this command or restart the application from another session.

0165 JRPtySIGTTINBlocked

The process is in a background process group and SIGTTIN is blocked or ignored.

Action: If the SIGTTIN signal is either blocked or ignored, the read service can be issued only from a process that is running in a foreground process group.

0166 JRPtyNoBufStorage

Storage is not available for pseudo-TTY buffers.

Action: Retry the open request. If this condition persists, contact the system programmer.

0167 JRFuncNotSupported

The function is not supported by device driver.

Action: See your IBM service representative.

0168 JRConv2TicksFailed

The time value is too large to convert to ticks.

Action: See your IBM service representative.

0169 JRPtAttemptedCRStore

Ptrace attempted to store into a control register.

Action: A debugger program tried to store into a control register using ptrace. The debugger program can read but not write to the control registers.

016A JRPtAttemptedPSW0Store

Ptrace attempted to store into the left half of PSW.

Action: A debugger program tried to store into word 0 (left half) of the PSW using ptrace. Only word 1 (right half) of the PSW can be changed by debugger programs.

016B JRPtCellNotAvail

There is not enough storage for ptrace.

Action: See your IBM service representative.

016C JRPtDbdEqualsDbr

The ptrace debugger process ID (PID) is the same as the debugged PID.

Action: A debugger program tried to start a debugging session with its own process ID (PID) as the target. Debugger programs cannot debug themselves.

016D JRPtDbdParentTerm

The ptrace debugged parent (debugger) ended.

Action: An attempt was made to start a debugging session using ptrace in a process to be debugged. There are two distinct cases:
  1. A PT_TRACE_ME ptrace request was issued in the child process of a debugger program.
  2. A process being debugged created a child using fork, and the child process tried to start a debugging session because ptrace multiprocess debugging is activated.

In either case, the parent of the process trying to start the debugging session has ended. This means either the debugger program has ended, or the parent of the newly forked child process has ended. Restart the debugger program and reestablish the debugging session.

016E JRPtDbdPidNotFound

The ptrace target debugged process ID (PID) is incorrect.

Action: A debugger program issued a ptrace request, but the target process ID (PID) is not valid. If the ptrace request was to start a debugging session, ensure that the target PID is valid. If the debugging session was already established, the target process may have ended unexpectedly. Reestablish a debugging session with the target process.

016F JRPtDbrPidNotFound

The ptrace debugger ended.

Action: An attempt was made to use ptrace to start a debugging session, but the debugger program has ended and its process ID (PID) is no longer valid. Restart the debugger program and reestablish the debugging session.

0170 JRPtDbrZombie

Ptrace debugger is ending.

Action: An attempt was made to use ptrace to start a debugging session, but the debugger program is ending. Restart the debugger program and reestablish the debugging session.

0171 JRPtInvCallingMode

The ptrace caller mode is incorrect.

Action: A ptrace request has been issued by a caller running with a PSW key other than 8, but ptrace supports only key 8 callers.

0172 JRPtInvDbdAddress

An incorrect address was supplied for the debugged process.

Action: A debugger program has tried to read or write storage in a debugged process, but the supplied storage address is not valid. Ensure that a valid storage address or address range is supplied on the ptrace request.

0173 JRPtInvDbrAddress

An incorrect address was supplied for the debugger process.

Action: A debugger program has supplied a buffer in which debugged process information should be read into, or which is the source for information to be written to the debugged process. The buffer address is not valid. Ensure that a valid buffer address or address range is supplied on the ptrace request.

0174 JRPtInvFPRNumber

The ptrace call has an incorrect floating point register number.

Action: A debugger program has tried to read or write a floating point register, but supplied an invalid floating point register number. Ensure that a valid floating point register number is supplied on the ptrace request. The register numbers are defined in the BPXYPTRC macro.

0175 JRPtInvGPRNumber

The ptrace call has an incorrect general register number.

Action: A debugger program tried to read or write a general or machine control register, but supplied an incorrect register number. Ensure that a valid register number is supplied on the ptrace request. The register numbers are defined in the BPXYPTRC macro.

0176 JRPtInvLength

The ptrace length is incorrect.

Action: A debugger program supplied a buffer in which debugged process information should be read into, or which is the source for information to be written to the debugged process. The length associated with the buffer is too large. The maximum allowable length is defined in the BPXYPTRC macro.

0177 JRPtInvNumberThreads

The ptrace target process has no threads.

Action: A debugger program tried to start a debugging session with a process that contains no threads. Only dubbed processes can be debugged.

0178 JRPtInvPtraceState

The ptrace mode of target process is incorrect.

Action: An attempt was made to use ptrace to start a debugging session with a target process. The ptrace mode (active or inactive) of the target process is inconsistent with the type of ptrace initiation request. The following are possible causes:
  1. A PT_TRACE_ME or PT_ATTACH ptrace request was issued to start a new debugging session, but the target process is already being debugged.
  2. A PT_REATTACH ptrace request was issued to restart an existing debugging session, or a process being debugged while in multiprocess debugging mode has created a new child with fork, and the child attempted to start a debugging session, but the target process or new child was not already in ptrace mode.
  3. During initiation of a debugging session, resources that would indicate the process is already being debugged were detected. This could indicate incomplete cleanup of a previous debugging session.

If you were trying to attach or reattach to a process for debugging purposes, verify that you specified the correct process ID (PID). Otherwise, contact the system programmer to determine the problem with the target process.

0179 JRPtInvRequest

The ptrace request was not valid.

Action: A ptrace request was issued with a request type that is not valid. Reissue the ptrace request with a valid request type.

017A JRPtInvSignalNumber

The ptrace service does not have a valid signal number.

Action: A debugger program tried to continue or detach from a debugged process but has supplied an incorrect signal number. Ensure that a valid signal number is supplied on the ptrace request. The signal numbers are defined in the BPXYSIGH macro.

017B JRPtInvUareaOffset

The ptrace service does not have a valid offset into the user area.

Action: A debugger program tried to read the user area of a debugged process, but has supplied an incorrect user area offset. Ensure that a valid user area offset is supplied on the ptrace request. The user area offsets are defined in the BPXYPTRC macro.

017C JRPtOldDbrPidNotFound

The ptrace original debugger ended.

Action: A debugger program has tried to reattach to a debugged process to reestablish a debugging session. The previous (original) debugger program associated with the debugged process has ended. This could indicate that the new debugger program was attempting to reattach at the same time the original debugger program was ending. Restart the debugger programs to reestablish the desired debugging sessions.

017D JRPtStateError

The ptrace service has detected an internal state error.

Action: See your IBM service representative.

017E JRPtProcessNotPtraced

The ptrace target process is not in ptrace mode.

Action: A debugger program issued a ptrace request, but the target process is not being debugged. Reissue the ptrace request with the correct process ID (PID).

017F JRPtProcessNotStopped

The ptrace target process was not stopped for ptrace.

Action: A debugger program issued a ptrace request, but the target process is not currently in a stopped state. The ptrace service request can be issued only when the target process is in a stopped state.

0180 JRPtProcessTerm

The ptrace target process ended.

Action: A debugger program issued a ptrace request, but the target process has ended unexpectedly. Restart the debugger program and reestablish the debugging session.

0181 JRPtRecoveryEntered

Ptrace error recovery was entered.

Action: See your IBM service representative.

0182 JRPtRestrictedProcess

The ptrace target process is restricted from debugging.

Action: A debugger program tried to initiate a debugging session with a process that is restricted from being debugged. The following types of processes are restricted:
  • MVS system address spaces
  • The initial process, with a process ID (PID) of 1
0183 JRPtSigInterrupt

The ptrace request was interrupted by a signal for the debugger.

Action: A debugger program issued a ptrace request, but a signal that either is being caught by or would end the debugger program has interrupted the ptrace request.

0184 JRTIMUnexpectedErr

An error occurred in the times call.

Action: See your IBM service representative.

0185 JRExecUnexpectedErr

An error occurred in exec and execmvs services.

Action: See your IBM service representative.

0186 JRExecParmErr

An error occurred when copying parameters passed to the exec service.

Action: An error occurred while copying parameters specified by the caller of the exec service. The probable causes are:
  • An incorrect address in the argument or environment length lists
  • An incorrect address in the argument or environment data lists
  • An incorrect argument or environment data length

Correct any error conditions in the parameter data specified by the caller, and resubmit the job.

0187 JRChowntoPipe

The fchown service was issued against a pipe.

Action: This request cannot be performed against a pipe. Select a file descriptor that refers to a nonpipe file and reissue the request.

0188 JRChaudtoPipe

The fchaudit service was issued against a pipe.

Action: This request cannot be performed against a pipe. Select a file descriptor that refers to a nonpipe file and reissue the request.

0189 JRExecKernErr

An error occurred in the exec call.

Action: See your IBM service representative.

018A JRBadRBState

The caller's request block state was incorrect.

Action: A function was requested that requires the user to be running under the same request block that its thread was created under or from which it issued the signal setup service (BPX1MSS). The condition is probably the result of issuing a request block-sensitive service after a link was done.

018B JRSignalError

A signal error occurred.

Action: See your IBM service representative.

018C JRInvalidSigProc

The mask address was incorrect.

Action: The address of the signal mask passed to this function was not valid. Retry the function with a valid address pointing to the signal mask.

018D JRBadAlet

An incorrect ALET was given as input.

Action: Do not specify an ALET of 1. Do not specify an ALET of 0 unless the secondary and home address spaces are the same.

018E JRRMGUnexpectedErr

An error occurred in the resource call.

Action: See your IBM service representative.

018F JRQuiescing

The call did not complete. The file system is not in an active state. This may be a temporary condition. One of the following conditions apply: (1) The file system is in the process of being unmounted or is unmounted. (2) An attempt to unmount the file system occurred, but failed. The file system is in the IMMEDIATE UNMOUNT ATTEMPTED state. (3) The file system is in the process of remounting. (4) The file system ownership is in the process of moving to another system. (5) The file system is NOT ACTIVE or UNOWNED.

Action: Use the D OMVS,FILE,NAME= system command to determine the status of the file system. Perform the following actions, depending on the file system state:
  • If the file system is ACTIVE then retry the operation. If the problem persists then the application should be recycled or otherwise close() and open() the file.
  • If the file system state is IMMEDIATE UNMOUNT ATTEMPTED then the file system must be unmounted using the FORCE option.
  • If the file system state is UNOWNED then follow local procedures to recover the file system. If the file system is mounted with the NOAUTOMOVE option then the file system will be recovered once the original owner system reinitializes.
  • If the file system state is NOT ACTIVE then unmount the file system with the FORCE option. If this is not successful and this is a shared file system configuration then use the F BPXOINIT,FILESYS=UNMOUNT command to unmount the file system.
0190 JRPtyInvalidAction

The action code is incorrect.

Action: An incorrect action code was specified. Correct the program and rerun.

0191 JRPtyInvalidCcflag

The c_cflag bits are incorrect.

Action: An undefined bit was set in the c_cflag field of the termios. The termios structure used in a tcsetattr request should be derived from an earlier tcgetattr request, and only defined bits in the c_cflag field should be altered. Correct the program and rerun.

0192 JRPtyInvalidClflag

The c_lflag bits are incorrect.

Action: An undefined bit was set in the c_lflag field of the termios. The termios structure used in a tcsetattr request should be derived from an earlier tcgetattr request, and only defined bits in the c_lflag field should be altered. Correct the program and rerun.

0193 JRPtyInvalidCiflag

The c_iflag bits are incorrect.

Action: An undefined bit was set in the c_iflag field of the termios. The termios structure used in a tcsetattr request should be derived from an earlier tcgetattr request, and only defined bits in the c_iflag field should be altered. Correct the program and rerun.

0194 JRPtyInvalidCoflag

The c_oflag bits are incorrect.

Action: An undefined bit was set in the c_oflag field of the termios. The termios structure used in a tcsetattr request should be derived from an earlier tcgetattr request, and only defined bits in the c_oflag field should be altered. Correct the program and rerun.

0195 JRPtyInvalidOutBaud

The output baud rate is incorrect.

Action: An incorrect output baud rate was set. The termios structure used in a tcsetattr request should be derived from an earlier tcgetattr request, and the output baud rate should only be set using the cfsetospeed function. Correct the program and rerun.

0196 JRPtyInvalidInBaud

The input baud rate is incorrect.

Action: An incorrect input baud rate was set. The termios structure used in a tcsetattr service request should be derived from an earlier tcgetattr service request, and the input baud rate should be set using only the cfsetispeed service. Correct the program and rerun.

0197 JRPtyBgCall

This is a background process.

Action: The service requested is not allowed from the background. Rerun the program in the foreground.

0198 JRInvIoctlCmd

The input command value is incorrect.

Action: The command is not supported. Correct the program and rerun.

0199 JRPtyNoCntlTerm

The caller has no controlling terminal.

Action: The caller has no controlling terminal. Correct the program or rerun it in an environment where the terminal is the controlling terminal.

019A JRPtyDiffSession

This is not the caller's controlling terminal.

Action: The specified file descriptor is not for the caller's controlling terminal. Correct the program or rerun it in an environment where the file is for the controlling terminal.

019B JRecoveryInvoked

Recovery code was invoked.

Action: See your IBM service representative.

019C JRPtKillFailed

The ptrace kill signal failed.

Action: See your IBM service representative.

019E JRPtPtrbNotAvail

The ptrace service cannot complete the request due to synchronization error.

Action: See your IBM service representative.

019F JRPtBadEnvironment

The ptrace request handler environment is not valid.

Action: See your IBM service representative.

01A0 JRPtEdIsAuthorized

The ptrace debugged process is running in supervisor state.

Action: A debugger program issued a ptrace request, but the target process is currently running in supervisor PSW state. Do not issue ptrace requests while a debugged process is running in supervisor state.

01A1 JRPtCsvinfoFailed

Ptrace received an error from CSVINFO.

Action: See your IBM service representative.

01A2 JRPtLDBufferTooSmall

The ptrace loader information request buffer is too small.

Action: A debugger program tried to read loader information from a debugged process into a supplied buffer, but the buffer was too small to hold all the loader information. Reissue the ptrace request with a larger buffer. The maximum length of the buffer is defined in the BPXYPTRC macro.

01A4 JRPtDbrParentEqualsDbd

The ptrace debugger parent PID is the same as debugged PID.

Action: A debugger program tried to start a debugging session with its parent process as the target. Debugger programs cannot debug their parent.

01A5 JRPtyNotPGLeader

The process is not a process group leader.

Action: The process group ID specified does not represent a process group leader. Correct the program or rerun it in an environment where the process is a process group leader.

01A6 JRPtyNotSlave

Unsupported function against master TTY.

Action: The requested function is not allowed against a master pseudo-TTY. Correct the program and rerun.

01A7 JRPtyBadQueSel

The queue selector is not valid.

Action: The queue selector is not valid. Correct the program and rerun.

01A8 JRPtyNoSessLeader

The system is unable to locate the session leader.

Action: In order to perform the requested function, the session leader needed to be located, but the system could not find the session leader. If this problem recurs, contact your system programmer.

01A9 JRNoCTTY

There is no controlling terminal for this process.

Action: The open request cannot be processed.

01AA JRPtyHupclClose

The slave pseudo-TTY file was previously closed with the termios HUPCL flag set.

Action: The slave pseudo-TTY file for this device minor number had been previously opened and closed. During the final close of the slave pseudo-TTY file, the termios HUPCL flag was on. This causes any subsequent slave pseudo-TTY file open for this device minor number to be rejected until the pseudo-TTY connection is completely ended (that is, the master pseudo-TTY file is also closed). If you want to open the slave pseudo-TTY file at this point, the application should clear the HUPCL flag using the tcsetattr service before the last slave pseudo-TTY file close.

01AB JRFsInUse

The requested file system is still in use.

Action: A normal unmount was requested for the file system. There is at least one process still using the file system, so the request to unmount cannot be honored.

01AC JRPtyInvalidPgid

The requested process group ID is not valid.

Action: The process group ID specified is not a valid OpenMVS process group ID. Correct the program and rerun.

01AD JRPtyNotInSession

The process group ID (PGID) does not exist in the caller's session.

Action: The caller's session does not have a process group with the specified process group ID. The process group may have completed without the caller's knowledge. Correct the program and rerun.

01AE JRBrlmNotActive

The byte-range lock manager is not active.

Action: The byte-range lock manager is trying to recycle. Reissue the request after the recycle has completed.

01AF JRBrlmFileLockRecycling

File lock is being recycled. Do not use until the file is closed by all users.

Action: The requested file can no longer be used for byte-range locking. The file cannot be locked until it has been recycled. To recycle the file, close all file descriptors open for this file. After all users have closed this file, it will be recycled. It may be some time before all open file descriptors for this file have been closed.

01B0 JRBrlmBadFileType

Byte-range locking can be performed only on regular files.

Action: Reissue the request and specify the file descriptor for a regular file.

01B1 JRBrlmNoReadAccess

Shared byte-range locks are only for files open for read.

Action: To set a read lock on a file, it must be opened with read access. Reissue the request and specify a file descriptor that has read access to the file.

01B2 JRBrlmNoWriteAccess

Exclusive byte-range locks are only for files open for write.

Action: To set a write lock on a file, it must be opened with write access. Reissue the request and specify a file descriptor that has write access to the file.

01B3 JRBrlmBadL_Type

A byte-range lock request specified an l_type that is not valid.

Action: The value specified for l_type must be one of the following, found in BPXYBRLK:
  • F_RDLCK to set a read lock
  • F_WRLCK to set a write lock
  • F_UNLCK to unlock a range
01B4 JRBrlmInvalidRange

A byte-range lock extends to before the start of the file.

Action: The range specified by the l_start, l_whence, and l_len must not extend beyond the beginning of the file. Reissue the request and specify a valid range.

01B5 JRBrlmBadL_Whence

A byte-range lock request specified an l_whence that is not valid.

Action: The value specified for l_whence must be one of the following, found in BPXYSEEK:
  • SEEK_SET
  • SEEK_CUR
  • SEEK_END
For v_lockctl requests, only SEEK_SET is valid.
01B6 JRSecurityInternalError

Internal error in security product.

Action: See your IBM service representative.

01B7 JRBrlmRangeNotAvailable

All or part of requested range is held by another user.

Action: Issue a set lock with wait request to obtain the requested lock when all current users and waiters have freed it.

01B8 JRBrlmDeadLockDetected

Waiting on the specified range causes a deadlock.

Action: To avoid deadlock, release the locks being held before requesting a new range. All users should obtain locks in the same order to maintain a lock hierarchy and to avoid deadlocks.

01B9 JRBrlmSignalPosted

While the process was waiting for a byte-range lock, a signal was posted.

Action: Try obtaining the lock again. To prevent signals from interrupting the process, you can set up a signal handler.

01BB JRPtSigactionFailed

Ptrace sigaction failed.

Action: See your IBM service representative.

01BC JRPtSigprocmaskFailed

Ptrace sigprocmask failed.

Action: See your IBM service representative.

01BD JRBrlmBadL_Len

A byte-range lock request specified an incorrect l_len.

Action: The l_len value cannot be less than zero. Reissue the request and specify an l_len that is greater than or equal to zero.

01BF JRReadUserStorageFailed

A read error occurred on the user data area passed to the service.

Action: The user data area passed was not addressable. Verify that the address passed was valid and reissue the request.

01C0 JRWriteUserStorageFailed

A write error occurred on the user data area passed to the service.

Action: The user data area passed was not addressable. Verify that the address passed was valid and reissue the request.

01C2 JRBrlmAlreadyWaiting

Request includes a range already being waited on.

Action: The process is already waiting for a byte-range lock that intersects with the requested range. Wait until the first request is honored before issuing another.

01C3 JRBrlmPromotePending

Another user is waiting to promote the requested range.

Action: Another user has already requested promotion of the requested range. That promotion will not be granted until all other users unlock their shared locks on that range. Unlock the range in conflict and issue a set-lock-wait request for the exclusive lock desired.

01C4 JRPtyNoPtyrStorage

There is not enough storage in the kernel address space.

Action: This should be a transient condition. Reissue the service. If the problem persists, contact the system programmer or system administrator to diagnose the storage usage in the kernel address space.

01C5 JRBrlmProcessBroken

This process has been marked broken for byte locking.

Action: The process cannot issue byte-range locking requests any more.

01C6 JRPtyConnectionInop

The pseudo-TTY connection is inoperative.

Action: An internal error occurred, causing this pseudo-TTY connection to be marked as inoperative. To clear this error condition, all file descriptors associated with this device minor number must be closed.

01C8 JRDtuErr

An error occurred during process signal initialization.

Action: See your IBM service representative.

01C9 JRBrlmUnlockWhileWait

The unlock service is not valid while the process is waiting for an intersecting lock.

Action: The process is presently waiting for a lock. No unlock requests will be accepted for a range that intersects with the range being waited for.

01CA JRBrlmObjAndProcBroken

The object and process are marked broken for byte locking.

Action: The process can no longer issue byte-range locking requests.

01CB JROutOfCells

Out of nonexpandable cell pool cells.

Action: See your IBM service representative.

01CC JRBadTree

The session or group tree is broken.

Action: See your IBM service representative.

01CD JRFd2TooSmall

The second file descriptor cannot be smaller than the first.

Action: The specified request requires that the second file descriptor be greater than or equal to the first file descriptor.

01CE JRPtCreateError

An unexpected error occurred in the BPX1PTC service.

Action: See your IBM service representative.

01CF JRNotAuthorized

Unauthorized caller of BPX1PTC in an authorized environment.

Action: The invoker of BPX1PTC is a problem state, key 8, non-job step authorized caller. The current environment requires the caller to be either supervisor state, key 0&ndash.7, or job-step authorized. Reissue the BPX1PTC callable service with the correct authorization.

01D0 JRPtExitError

An unexpected error occurred in the BPXPTEXT service.

Action: See your IBM service representative.

01D1 JRPtCancelError

An unexpected error occurred in the BPX1PTB service.

Action: See your IBM service representative.

01D2 JRPtDetachError

An unexpected error occurred in the BPX1PTD service.

Action: See your IBM service representative.

01D3 JRPtatEye

The pthread attribute area contains an incorrect eyecatcher.

Action: The eyecatcher value must be BPXYPTAT. Reissue the BPX1PTC callable service with the corrected eyecatcher value.

01D4 JRPtatAddrError

The pthread attribute area address is incorrect.

Action: Reissue the call to the BPX1PTC service with a pthread attribute area address that is accessible to the caller of BPX1PTC.

01D5 JRPTCNotSupp

BPX1PTC is not supported from the calling task.

Action: The BPX1PTC callable service can be issued only from the task that first invoked BPX1PTC within the process or from any of its daughter tasks. Reissue the BPX1PTC callable service from a task that can support the invocation.

01D6 JRAllFilesNotClosed

All requested files were not closed.

Action: Some of the file descriptors within the specified range remain open. Use closedir to close any directory file descriptors. Any other file descriptors that remain open may have been opened while the process was executing in an authorized state, and the process may no longer be authorized to use them.

01D7 JRExitRtnError

An error occurred in the user exit called by the exec.

Action: An error occurred after the BPX1EXC or BPX1EXM callable service passed control to the exit routine location specified by the caller. There are two probable causes for this error:
  • The location specified for the user exit routine was incorrect
  • A program check occurred while the user exit routine was in control

Verify the location of the user exit routine and that the routine does not cause a program check to occur.

01D8 JRThreadTerm

The service was rejected because the requesting thread is terminating.

Action: The BPX1PTX callable service should be issued to complete the termination of the thread and to obtain a new thread to process. Other OpenMVS callable services are not supported while a thread is in this state.

01DA JRLightWeightThid

The thread specified is a lightweight thread.

Action: The thread specified by the caller is for a lightweight thread. Lightweight threads are not managed by OpenMVS.

01DB JRAlreadyDetached

The thread specified is already detached.

Action: The thread specified by the caller is already detached. The requested service cannot be performed on a detached thread.

01DC JRThreadNotFound

The thread specified was not found.

Action: The thread specified by the caller is not a thread in the current process.

01DE JRHeavyWeight

The new thread was not started and the existing thread is a heavyweight thread.

Action: The existing task is a heavyweight thread and cannot be reused via the PTGetNewThread option.

01DF JRGetFirst

The first call did not specify PTGetNewThread.

Action: The first call to this service from a newly created thread must specify the PTGetNewThread option.

01E0 JRAlreadyJoined

The thread specified was already joined by another thread.

Action: The thread specified by the caller of the pthread_join service is currently joined by another thread. The target thread of a pthread_join can be joined by only one thread at a time.

01E1 JRPTJoinError

An error occurred in the BPX1PTJ service.

Action: See your IBM service representative.

01E2 JRJoinExitStatPtr

The address of the exit status parameter is not correct.

Action: An error occurred while the thread exit status was being copied to the location specified by the caller of the pthread_join service. Check the exit status location specified by the caller of the pthread_join service for an incorrect location.

01E3 JRJoinToSelf

The thread attempted to join to itself.

Action: The thread specified by the caller and the thread calling the pthread_join service are the same. A thread is not allowed to join to itself.

01E4 JRJoinLoop

The connection would result in thread waiting for itself.

Action: The thread specified by the caller of the pthread_join service would create a loop of joined threads. A thread is not allowed to join any thread or chain of joined threads that would result in a loop back to itself.

01E5 JRJoinIPTExited

The thread attempted to connect to IPT after IPT had already exited.

Action: See your IBM service representative.

01E6 JRJoinAsyncNoFreeTasks

The connection ended with an asynchronous thread and no tasks available.

Action: See your IBM service representative.

01E7 JRAlreadyPtexited

The calling thread has already been exited through a call to the BPX1PTX service.

Action: The calling thread is now in a terminated state; the calling program should return to the operating system to allow the task to be terminated.

01E8 JRAlreadyTerminated

The thread specified has already ended.

Action: The thread specified by the caller of the pthread_cancel service has already been canceled or exited and is in the process of being ended.

01E9 JRCallRtmErr

The CALLRTM macro returned a return code with an error.

Action: See your IBM service representative.

01EA JRBrokenBrlmRecycling

The byte-range-lock manager is broken and is currently recycling.

Action: The byte-range-lock manager is trying to recycle. Reissue the request when the recycle has completed.

01EB JRPtatSysOff

The system offset value in the pthread attribute area is incorrect.

Action: The system offset value must be set to the value provided with the BPXYPTAT mapping, PTATSYSOFFVAL. Reissue the BPX1PTC callable service with the corrected system offset value.

01EC JRPtatSysLen

The system length value in the pthread attribute area is incorrect.

Action: The system length value must be set to the value provided with the BPXYPTAT mapping, PTATSYSLENVAL. Reissue the BPX1PTC callable service with the corrected system length value.

01ED JRPtatLen

The total length value in the pthread attribute area is incorrect.

Action: The total length value must be set to the sum of PTAT#LENGTH and PTATUSERLENGTH. Use the BPXYPTAT mapping to correct this error. Reissue the BPX1PTC callable service with the corrected total length value.

01EE JRRMGWrongDataLen

Resource data area length is not correct for this release.

Action: The Data_Area_Length field passed to the resource callable service does not match the length of the storage area to be returned. To avoid misinterpretation of returned data, the service fails. The Data_Area_Length field could be incorrect because of a coding error. Or, the length value required may have changed when your installation migrated to a new release. Correct the value and recompile your program.

01EF JRInvOption

Incorrect option specified on call to BPX1PTX.

Action: The option specified is either not a supported option or is a supported option that was specified in an unsupported environment. Examples of the latter error are:
  • The PTGETNEWTHREAD option is specified from a thread that was not created through the BPX1PTC callable service. The PTEXITTHREAD option is supported only from this type of thread.
  • The PTEXITTHREAD option is specified on the first invocation of BPX1PTX from the thread initialization routine. The first invocation of BPX1PTX must specify the PTGETNEWTHREAD option to obtain the first thread to process.

Reissue the BPX1PTX callable service with the corrected option value.

01F0 JRInitRtn

The initialization routine is not valid for the current environment.

Action: The initialization routine address specified on the BPX1PTC invocation does not match the initialization routine address supported in the current environment. The initial call to BPX1PTC within the current process image specified a different address. Only one initialization routine is supported for a given process image. Reissue the BPX1PTC callable service with the initialization routine address that is supported in the current process image.

01F1 JRPtatWeight

The pthread attribute area contains an incorrect weight value.

Action: The pthread weight attribute value must be set to PTATHEAVY or PTATMEDIUM. Use the BPXYPTAT mapping for the definition of this value. Reissue the BPX1PTC callable service with the corrected pthread weight attribute value.

01F2 JRPtatSyncType

The pthread attribute area contains an incorrect Sync Type value.

Action: The pthread sync type attribute value must be set to PTATSYNCHRONOUS. Use the BPXYPTAT mapping for the definition of this value. Reissue the BPX1PTC callable service with the corrected pthread sync type attribute value.

01F3 JRPtatDetachState

The pthread attribute area contains an incorrect detach state value.

Action: The pthread detach state attribute value must be set to PTATUNDETACHED or PTATDETACHED. Use the BPXYPTAT mapping for the definition of these values. Reissue the BPX1PTC callable service with the corrected pthread detach state attribute value.

01F4 JRNoSuchPid

The process ID is incorrect.

Action: Choose a process ID that is valid.

01F5 JRPidEQSessLeader

The process ID is a session leader.

Action: Choose a process ID that is not a session group leader.

01F6 JRTooMany

The event list specified contained more than one event.

Action: The event list specified for the BPX1CPO callable service contained more than one event. Reissue the BPX1CPO callable service with an event list that contains only one event.

01F7 JRPidDifferentSession

The process ID is in a session different from the caller.

Action: Choose a process ID that is in the same session as the caller.

01F8 JRExecAfterFork

The process ID was called by the exec service after the fork service.

Action: Choose a process ID that does not belong to a process that has been started with exec after a fork.

01F9 JRTimeOutNotAuth

The caller to BPX1CPO service specified the CW_TIMEOUT event but is not authorized.

Action: The caller of the BPX1CPO service specified the CW_TIMEOUT event but is not authorized. To specify the CW_TIMEOUT event, the caller must be authorized. Reissue the BPX1CPO service call with another valid event.

01FA JRNotDescendant

The process ID is not an immediate descendant of the caller.

Action: Choose a process ID that is an immediate descendant of the caller (that is, a child, but not the child of a child).

01FB JRPgidDifferentSession

Process group ID is in a session different from the caller.

Action: Choose a process ID that is in the same session as the caller.

01FC JRCallerIsPgLeader

The caller is already a process group leader.

Action: Choose a process ID that is not already a process group leader.

01FD JRNullMask

The caller specified a null signal mask.

Action: At least one valid signal must be specified in the signal mask.

01FE JRRdlBuffLenInvalid

The length of the buffer is less than zero.

Action: The readlink service requires that the specified buffer length be greater than or equal to zero.

0200 JRPswKeyNotValid

The PSW key of the caller is not a valid key.

Action: A service was requested that requires the invoker to be in the same key that the process was dubbed under.

0201 JRAlreadySigSetUp

BPX1MSS found the process already set up for signals.

Action: Only one task can be set up for signals at any one time. Issue the signal unset (BPX1MSD) service on the task that did the last setup and then reissue this service.

0202 JRNotSigSetUp

The service found the current task was not set up for signals.

Action: Issue the signal setup service BPX1MSS and then reissue this service.

0203 JREndingSlashSymlink

The pathname ended with slash on the symlink service.

Action: The linkname specified on a symlink request contained a trailing slash. Reissue the request and omit the trailing slash.

0204 JRUndefEvents

The specified event list contains undefined events.

Action: Only specify events defined in BPXYCW for the BPX1CSE, BPX1CWA, or BPX1CTW callable services. For the BPX1CPO service, the only event allowed is CW_CONDVAR.

0205 JRNoEvents

The specified event list is zero.

Action: Specify one or more events defined in BPXYCW for the BPX1CSE, BPX1CWA, or BPX1CTW callable services. For the BPX1CPO service, specify the CW_CONDVAR event.

0206 JRIPTCannotLeave

The caller has daughter tasks. Termination is denied.

Action: Terminate with BPX1EXI. Calls to BPX1MPC will be denied.

0207 JRNotSetup

The thread is not set up for cond_wait or cond_timed_wait.

Action: Specify one or more events defined in BPXYCW for the BPX1CWA or BPX1CTW callable services, or use the BPX1CSE callable service prior to BPX1CWA or BPX1CTW.

0208 JRAlreadySetup

The thread is already set up for cond_setup, cond_wait, or cond_timed_wait.

Action: Use the BPX1CCA callable service to cancel a condition wait before setting up for a new condition wait.

0209 JROutOfRange

The value specified for a parameter is outside the allowable range.

Action: Compare the argument values you specified to the documented limits to find which ones are unacceptable.

0210 JRNanoSecondsTooBig

The value specified for nanoseconds is outside the allowable range.

Action: Change the value specified for nanoseconds to be less than 1&finespace;000&finespace;000&finespace;000 (1000 million).

0211 JRTimeOut

The time for the service to wait has expired.

Action: While the process was waiting for signals or a condition to occur, the wait time specified expired.

0212 JRDup2Error

A problem occurred with the requested file descriptor.

Action: Try the request again.

0213 JRAccept

Vnode operation accept is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0214 JRBind

Vnode operation bind is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0215 JRConnect

Vnode operation connect is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0216 JRGetHost

Vnode operation gethost is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0217 JRGetName

Vnode operation getname is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0218 JRSockOpt

Vnode operation sockopt is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0219 JRListen

Vnode operation listen is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

021A JRReadWriteV

Vnode operation readwritev is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

021B JRSndRcv

Vnode operation sndrcv is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

021C JRSndToRcvFm

Vnode operation sndtorcvfm is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

021D JRSrMsg

Vnode operation srmsg is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

021E JRSelect

Vnode operation select is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

021F JRSetPeer

Vnode operation setpeer is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0220 JRShutdown

Vnode operation shutdown is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0221 JRSocket

VFS operation socket is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0222 JRNoSocket

The requested operation cannot be performed on a socket file descriptor.

Action: Specify a file descriptor that does not refer to a socket

0223 JRMustBeSocket

The requested operation is only valid on a socket file descriptor.

Action: Specify a file descriptor that refers to a socket.

0224 JRTargetEnding

The target process is ending.

Action: setpgid is not permitted because the target process is a zombie (terminating).

0225 JRQuiesceTypeInvalid

The quiescetype specified by the caller is invalid.

Action: Reissue the quiesce_threads service with the corrected quiescetype.

0226 JRQuiesceInProgress

Another thread in the process has already requested quiescing of all threads.

Action: See your IBM service representative.

0227 JRLastThread

The last pthread is exiting when the PTFAILIFLASTTHREAD option is specified.

Action: Reissue the BPX1PTX call without this option to cause the thread to be exited.

0228 JRDomainNotSupported

The requested domain is not supported.

Action: The domain specified does not exist. Specify an existing domain.

0229 JRNetwork

Vfs operation network is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

022A JROutofVdeCells

All Vde cells have been allocated.

Action: Try again after releasing any unused vnode tokens.

022B JRTokenMax

The maximum number of Vnode tokens have been allocated for this process.

Action: Specify a larger maximum number of vnode tokens on the next server registration.

022C JRVTokenFreed

The Vnode token has already been released.

Action: Ensure that the correct Vnode token is supplied.

022D JRWrongPID

The process does not own this Vde.

Action: Ensure that the correct Vnode token is supplied.

022E JRStaleVnodeTok

The Vnode token is stale.

Action: Ensure that the correct Vnode token is supplied.

022F JRInvalidVnodeTok

The Vnode token does not point to a Vde.

Action: Ensure that the correct Vnode token is supplied.

0230 JRNotRegisteredServer

The process is not a registered server.

Action: Issue a v_reg request to register as a server and issue the request again.

0231 JRInvalidRegType

The server type supplied in NRegSType is not valid.

Action: Ensure that the value provided in NRegSType is correct.

0232 JRNameTooLong

The name supplied is longer than the allowed maximum.

Action: Correct the length value supplied and reissue the request.

0233 JRAlreadyRegistered

The process is already registered as a server.

Action: There is no need to issue the v_reg service. The Vnode interface services are already available to this process.

0234 JRInvalidNReg

An incorrect NReg parameter list was passed.

Action: Ensure that the values provided in NRegID and NRegLen are correct.

0235 JRNoLeadingSlash

The pathname does not begin with /.

Action: Ensure that the pathname parameter supplied on the request is an absolute pathname.

0236 JRStaleVfsTok

The VFS token is stale.

Action: Obtain a new VFS token via v_rpn.

0237 JRSmallAttr

The Attr length parameter was too small.

Action: Ensure that the Attr parameter points to a structure of length Attr#Len and the AttrLen parameter supplies this length.

0238 JRSmallMnte

The Mnte length parameter was too small.

Action: Ensure that the Mnte parameter points to a structure large enough to contain an MnteH and one Mnte. Also ensure that the MnteLength parameter supplies this length.

0239 JRRwNotRegFile

The rdwr call is valid only on a regular file.

Action: In order to be able to read or write a file, you must specify the Vnode Token for a file, not for a directory or a FIFO.

0240 JRDubSetting

The dub setting value specified on the BPX1SDD service call is not correct.

Action: The dub setting value must be set to DUBTHREAD or DUBPROCESS. Use the BPXYCONS macro for the definition of these values. Reissue the BPX1SDD callable service with the corrected dub setting value.

0241 JRInvalidAtt

The Attribute structure passed to BPX1CHR or BPX1FCR was not valid.

Action: The length passed must be equal to the current version, and the ATTID and ATTVERSION must be initialized to the constants defined in BPXYATT.

0242 JRInvalidOSS

The OSS is not valid.

Action: Correct the OSS and call the service again.

0243 JRSmallFSAttr

The FSAttr length parameter was too small.

Action: Ensure that the FSAttr parameter points to a structure of length SSTF#Len and the FSAttrLen parameter supplies this length.

0244 JRAPFAuthChange

A local process exec or a local spawn, running in an authorized state attempted to load and execute an unauthorized program.

Action: An Attach_exec or local spawn was attempted which would allow an unauthorized program to be executed from an APF authorized address space. This is not permitted since it would allow an unauthorized program to run in an authorized state.

0245 JRIDChange

A local process exec tried to change the UID / GID.

Action: An Attach_exec was attempted which would change the UID / GID authorization of the address space. This is not permitted.

0246 JROtherProcesses

An exec was attempted that would terminate the other processes in the address space.

Action: An exec is not permitted in an address space that contains multiple processes.

0247 JRPtRequestDenied

The ptrace request is not allowed for the current debugged program environment.

Action: A debugger program issued a ptrace request that is not allowed at the present time, due to the current environment in which the debugged program is running.

0248 JRInvalidFUio

An incorrect FUio area was passed.

Action: Ensure that the values provided in FUioID and FUioLen are correct and that valid options are specified.

0249 JRTokDir

The VNODE token specifies a directory.

Action: The service requested is not applicable to a directory; the VNODE token passed was for a directory.

024A JRTokNotDir

The VNODE token does not specify a directory.

Action: The service requested requires a directory, but the VNODE token passed is not for a directory.

024B JRInvalidAttr

The supplied Attribute structure was not valid.

Action: Ensure that the values provided in AttrID and AttrLen are correct.

024C JRMaxTasks
  • The number of tasks in the process is greater than the maximum allowable limit.
  • For a pthread_exit_and_get (BPX1PTX) call, the pthread is ended because there are already 10 medium-weight pthreads waiting for work.

Action:
024D JRMaxSockets

The number of active sockets is equal to the value specified on the MAXSOCKETS parmlib statement.

Action: Retry after some sockets have closed. For AF_INET or AF_INET6 domain sockets, you can change the MAXSOCKETS value dynamically using the SETOMVS RESET= or SET OMVS= system command. For AF_UNIX domain sockets change the MAXSOCKETS value in parmlib and re-ipl.

024E JROutofLatches

All latches in the socket latch set pool are assigned to Snodes.

Action: See your IBM service representative.

024F JROutofSocketCells

The system was unable to obtain a cell from the sockets cell pool.

Action: See your IBM service representative.

0250 JRNotDir

The name does not specify a directory.

Action: The service requested requires a directory, but the name specified is not for a directory.

0251 JROutofSocketsNodeCells

The system was unable to obtain a cell from the sockets node cell pool.

Action: See your IBM service representative.

0252 JRExternalLink

An external symbolic link was found but is not supported.

Action: Do not specify the name of an external symbolic link.

0253 JRSocketNotFound

The requested socket was not found, or is not active.

Action: See your IBM service representative.

0254 JRSocketNamed

A Bind request was received for a socket that was previously named.

Action: Do not specify Bind for a named socket.

0255 JRInvalidCallingState

The caller is not supervisor state and key 0.

Action: See your IBM service representative.

0256 JRPidIsCaller

Pid specifies the PID for the calling process.

Action: See your IBM service representative.

0257 JRPidNoLatch

Unable to obtain latch for PID.

Action: See your IBM service representative.

0258 JROutofSocketDataCells

The system was unable to obtain a cell from the sockets data buffer cell pool.

Action: See your IBM service representative.

0259 JRSocaNwkBitOn

Duplicate NETWORK parmlib statements exist.

Action: Remove the duplicate NETWORK statements from the parmlib member and re-ipl.

025A JRISGLCRTFailed

Latch set service ISGLCRT failed.

Action: See your IBM service representative.

025B JRListenNotAccepted

A listen syscall was issued for a socket that has not been bound, for a socket that is already a server, or for a socket that is already connected.

Action: Verify that the application program issues the listen at the proper time.

025C JRSocketClosed

An attempt was made to read, write or connect to a socket that is closed.

Action: Try the request again to a UNIX domain socket that is not closed.

025D JRTooManyThds

An attempt was made to create another thread but the process limit for pthreads has already been reached.

Action: Try the request again after some threads have been exited and detached or increase the process thread limit.

025E JRSocketCallParmError

A socket syscall contains incorrect parameters.

Action: Check the parameters and ensure the request is valid for the specified socket.

025F JRRecovery

The recovery VFS operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0260 JRInvalidRoutine

An incorrect routine address was passed.

Action: Reissue the BPX1IPT service and specify a nonzero routine address.

0261 JRRoutineError

An error occurred while the user-provided routine was in control.

Action: Refer to provided diagnostic information (user SYSxDUMP) to resolve the problem.

0262 JRNoLists

A Select request was issued without a read, write or exception list.

Action: Reissue the request and specify at least one list of file descriptors to be checked.

0263 JRListTooLong

The read, write or exception list is too long.

Action: Reissue the request and specify a read, write, or exception list that is 8192 bytes or less.

0264 JRListTooShort

The read, write or exception list is too short to contain the specified number of file descriptors and message queue identifiers.

Action: Reissue the request and specify a read, write, or exception list that is large enough to contain the specified number of file descriptors and message queue identifiers.

0265 JRMSOutOfRange

The value specified for microseconds is outside the allowable range.

Action: Reissue the request and specify a value for microseconds in the range 0 to 1&finespace;000&finespace;000 (1 second) inclusive.

0266 JRSecOutOfRange

The value specified for seconds is outside the allowable range.

Action: Reissue the request specifying a value for seconds in the range 0 to 2&finespace;678&finespace;400 (31 days) inclusive.

0267 JRNoFds

The read, write or exception list did not contain any file descriptors, or the Number_FDs parameter was not greater than 0.

Action: Reissue the request specifying at least one file descriptor in the read, write or exception list, and make sure the Number_FDs parameter contains the highest specifed FD.

0268 JRPtQuiesceFailed

Ptrace quiesce failed.

Action: See your IBM service representative.

0269 JRIncorrectSocketType

The socket type is incorrect for the request.

Action: Reissue the request and specify a socket descriptor that refers to a socket of the correct type.

026A JRWouldBlock

The O_NONBLOCK flag is set and this request would block.

Action: Reissue the request later.

026B JRExceedsBackLogCount

This connect request exceeds the connect backlog count that was specified on the Listen request.

Action: Reissue the request later.

026C JRLevelNotSupp

The value specified for Level is not supported by the physical file system.

Action: Reissue the request and specify a value for Level that corresponds to manipulation at the Socket Level.

026D JRSetNotSupp

The UNIX Domain Socket File System does not support the setting of socket options.

Action: See your IBM service representative.

026E JRInvOpOpt

The Option name specified is not valid.

Action: Reissue the request and specify a valid socket option.

026F JRBuff

The buffer for return information is too small.

Action: The length of the buffer specified on the service was not large enough to contain the data to be returned.

0270 JROptNotSupp

The Option name specified is not supported.

Action: Correct the error depending on the request:
  • Reissue the request and specify a supported socket option.
  • Reissue the request and specify a supported mmap or mprotect option.
  • Reissue the request and specify a supported osenv option.
0271 JRPtAsyncThread

The ptrace request is not allowed because the target thread is asynchronous.

Action: A debugger program issued a ptrace request for a target thread that is in an asynchronous state.

0272 JRSocketNotCon

The requested socket is not connected.

Action: Reissue the request after a successful connect request has completed. This value is also returned if an asynchronous connect is in progress.

0273 JRPtyNoPtysStorage

There is insufficient storage in the kernel address space.

Action: This should be a transient condition. Reissue the service. If the problem persists, contact the system programmer or system administrator to diagnose the storage usage in the kernel address space.

0274 JRUnknownKPRC

Kernpost returned an invalid return code.

Action: See your IBM service representative.

0275 JRSockRdwrSignal

Signal interrupt during socket read or write processing.

Action: Close the socket. The other end of the socket has been closed and is no longer being read or written.

0276 JRSockBufMax

There is insufficient storage for the socket message.

Action: Break the message into two or more smaller parts.

0277 JRInvalidMsgH

The socket message header is not correct.

Action: Correct the message header.

0278 JRSockNoName

The request requires a socket name structure.

Action: Specify a socket name.

0279 JRInvalidServerNameLen

The server name length supplied in NRegSNameLen is too long or negative.

Action: Correct the value supplied in NRegSNameLen and issue the request again.

027A JRNoOOBDataAvail

The MSG_OOB flag is set but no OOB data is available or OOB data is inline.

Action: Reissue the request with the MSG_OOB flag not set.

027B JRIncorrectTypeForFlag

MSG_OOB flag is set but socket is not a stream socket.

Action: Reissue the request with the MSG_OOB flag not set.

027C JRSockShutDown

Socket has been shutdown.

Action: Request cannot complete on this socket.

027D JRMSGHInvalid

msg_controllen or a cmsg_len has an incorrect length.

Action: Supply valid msg_controllen and cmsg_len values.

027E JRNoAddrSpace

The caller's address space name cannot be determined.

Action: The request cannot complete.

0280 JRNoName

The name length is zero.

Action: Supply a positive value for the name length.

0281 JRListLenBad

The length of one or all of the input bit lists is not a multiple of four or is not more than 256 bytes.

Action: Reissue the request specifying list lengths that are a multiple of four. If the request specified both file descriptors and message queues, make sure list lengths are also more than 256 bytes long.

0282 JrInvUserOp

The value specifed for the User Option was not 0 or 1.

Action: Reissue the request and specify 0 or 1.

0283 JRSocketProtocolInvalid

The protocol argument on the socket or socketpair syscall was not 0. The physical file system only supports a value of 0 for the protocol.

Action: Reissue the request and specify 0 for the protocol argument.

0284 JRSteplibAllocateBad

Dynamic allocation failed for a data set while attempting to build the STEPLIB concatenation.

Action: See your IBM service representative.

0285 JRSteplibConcatBad

Dynamic concatenation failed while attempting to build the STEPLIB concatenation.

Action: See your IBM service representative.

0286 JRSteplibOpenBad

Open of the steplib dd failed while attempting to build the STEPLIB concatenation.

Action: See your IBM service representative.

0287 JRSteplibDcbObtainBad

Storage could not be obtained for the STEPLIB dcb while attempting to build the STEPLIB concatenation.

Action: See your IBM service representative.

0288 JRNameExists

The name specified in the request is already in use.

Action: Check the name; if correct, then unlink the name and retry.

0289 JRListenNotDone

The socket is not ready to accept connections.

Action: Issue a listen request and then reissue the accept request.

028A JRSteplibDSORGBad

A nonpartitioned data set was specified in the STEPLIB concatenation.

Action: See your IBM service representative.

028B JRSteplibTooBig

More than 255 data sets were specified in the STEPLIB concatenation.

Action: See your IBM service representative.

028C JRListenNotStream

A listen syscall was issued for a socket that is not a stream socket. Listen is only valid for stream sockets.

Action: Correct the application program.

028D JRListenAlreadyDone

A listen request has already been completed.

Action: Issue an accept request to begin accepting connections.

028E JRSTLActionInvalid

The value specified for the action parameter is not valid.

Action: Specify a valid action and retry.

028F JRSTLTasksInvalid

The value specified for the task limit is not valid.

Action: Specify a task limit within the allowable ranges and retry the operation.

0290 JRSTLThreadsInvalid

The value specified for the thread limit is not valid.

Action: Specify a thread limit with the allowable ranges and retry the operation.

0291 JrTcpError

Tcp returned an error identified by the return code.

Action: Correct the error reported by the return code.

0292 JRNoSpace

Pthread_create failed, due to unavailable user address space storage.

Action: Reduce the amount of user address space storage consumed and retry the operation.

0293 JRMaxTcpPathIds

The maximum number of Tcp/Ip path IDs has been exceeded.

Action: Contact your IBM service representative.

0294 JRPtNotXtdEvent

The ptrace request is not allowed because the target process is not stopped for an extended event.

Action: A debugger program issued a ptrace request that requires the target process to be stopped for an extended event, but the process is not stopped.

0295 JRPtTooManyEvents

The ptrace PT_EVENTS request attempted to add more events than the specified maximum.

Action: A debugger program issued a ptrace PT_EVENTS request to add a new extended event ID. Adding the event would exceed the maximum number of events specified on the request.

0296 JrTcpNotActive

No AF_INET socket provider is active.

Action: Start the AF_INET socket provider you specified in parmlib and retry this socket request.

0297 JRMaxInetSockets

The number of active INET sockets is equal to the value specified on the MAXSOCKETS parmlib statement.

Action: Retry after some sockets have closed, or change the MAXSOCKETS value in parmlib, and re-ipl.

0298 JRECBerror

The last ECB pointer in the list of ECB pointers does not have the high order bit ('80000000'x) set on to indicate that it is the last ECB pointer in the list.

Action: Probable user programming error. Ensure that the service was called with the correct number of ECB pointers and that the last ECB pointer has the high order bit set on.

0299 JRECBListBad

An error occurred accessing the list of pointers to ECBs on a call to the MVSpauseInit service.

Action: Ensure that the ECB list is accessible in the caller's key and storage has been obtained for the ECB list.

029A JRECBstateBad

An error occurred accessing one or more of the input ECBs on a call to the MVSpauseInit or MVSpause service.

Action: Ensure that the ECBs are accessible in the caller's key and storage has been obtained for the ECBs.

029B JRECBListNotSetup

The MVSpause service was called but the MVSpauseInit service was never called to prepare for an MVSpause.

Action: Invoke the MVSpauseInit service to prepare for an MVSpause operation. Once MVSpauseInit completes successfully, the MVSpause service can be invoked.

029C JRSocketTypeNotSupported

The requested socket type is not supported.

Action: The error could be one of the following:
  • The address family specified on the sendmsg or sendto request was different from that specified when the socket was created.
  • For AF_UNIX sockets, only stream or datagram sockets are supported - some other type was requested on the socket request.
  • For AF_INET sockets, only stream, datagram and raw sockets are supported - some other type was requested on the socket request.
029D JREcbWaitBitOn

The wait bit (the high order bit) was on in the specified event control block (ECB).

Action: Initialize the ECB to zero, then reissue the request.

029E JRInvalidVlok

The supplied VLock structure was not valid.

Action: Ensure that the values provided in the VLock structure are correct. One of the following problems was detected: (1) The Vlock structure is too short. (2) The Vlock length field does not equal its length parameter. (3) The Vlock Id field does not equal 'VLOK'. (4) For Purge with purge masks specified, the purge mask length field was too short. (5) For UnLoadLocks from an unauthorized caller, the subpool specified was not between 1 and 127. (6) An output blocking lock is requested but the corresponding blocking lock length field value is too small. (7) A Vnode token was passed but it does not match the object specified in the Vlok.

029F JRInvalidServerPID

The supplied VLokServerPID value was not valid.

Action: Ensure that the value provided in the VlokServerPID field is a valid process ID.

02A0 JRNoLockerToken

No Locker token was specified in the Vlock structure.

Action: Ensure that the value provided in the VlokLockerTok field is the value returned when the Locker was registered.

02A1 JRBrlmObjectMissing

No Object was specified in the Vlock structure.

Action: Ensure that a value is provided in the VlokObject field on v_lockctl requests.

02A2 JRBrlmWrongLevel

The byte-range lock manager does not support the request.

Action: Ensure that the installed byte-range lock manager supports v_lockctl requests.

02A3 JRBrlmLockerNotRegistered

The Locker token specified in the Vlock structure is not registered.

Action: Register the Locker ServerPID and ClientPID with v_lockctl RegLocker and use the returned LockerTok on subsequent v_lockctl requests.

02A4 JRMultiProc

The specified function is not supported in an address space running multiple processes.

Action: Do not call the specified function from address spaces running multiple processes.

02A5 JRTaskAcee

The specified function is not supported when a task level ACEE is active for the calling task.

Action: Do not call the specified function from a task that has a task level ACEE active.

02A6 JRUserNameLenError

The user name length value was incorrect.

Action: Ensure that the user name length is between 1 and 8.

02A7 JRPasswordLenError

The pass length value was incorrect.

Action: Ensure that the pass length is between 1 and 8 for passwords and passtickets and between 9 and 100 for password phrases.

02A8 JRNewPasswordLenError

The new pass length value was incorrect.

Action: Ensure that the new pass length is between 1 and 8 for passwords and between 9 and 100 for password phrases.

02A9 JRMixedSecurityEnv

The specified function is not supported after a seteuid has changed the security environment of the caller.

Action: Do not call the specified function from a process that has issued a seteuid to change the security environment.

02AA JRQuiesceTerm

A pthread_quiesce(term) is already in progress on another thread in the caller's process.

Action: See your IBM service representative.

02AB JRQuiesceForce

A pthread_quiesce(force) is already in progress on another thread in the caller's process.

Action: See your IBM service representative.

02AC JRQuiesceFreeze

A pthread_quiesce(freeze) is already in progress on another thread in the caller's process.

Action: See your IBM service representative.

02AD JRQuiesceFreezeForce

A pthread_quiesce(freeze_force) is already in progress on another thread in the caller's process.

Action: See your IBM service representative.

02AE JRTso

The specified function is not supported in a TSO space running multiple processes.

Action: Do not call the function in question from address spaces running multiple processes.

02AF JREnvDirty

The specified function is not supported in an address space where a load was done that is not program controlled.

Action: Make sure that programs being loaded into this address space are defined as program controlled.

0302 JRIpcBadID

The ID is not valid or has been removed from the system.

Action: A bad IPC member ID specified on the request is not correct. Reissue the command using an existing IPC member ID.

0303 JRIpcDenied

Access was denied because the caller does not have the correct permission.

Action: The caller lacked ownership, read or alter permission.

0304 JRIpcExists

The caller issued CREATE, EXCL and the key was already defined to InterProcess Communications.

Action: Ensure the key specified on shmget, semget, and msgget has not been assigned an IPC member ID or do not specify IPC_EXCL.

0305 JRIpcMaxIDs

The number of IDs exceeds the system limit and the create fails.

Action: Remove unused IDs from the system using the shell command ipcrm or change the system limit. This system limit is set by parameters IPCMSGNIDS, IPCSHMNIDS, and IPCSEMNIDS in a BPXPRMxx parmlib member. You can view these values using the ipcs -x shell command.

0306 JRIpcNoExist

The caller tried to locate a member for the key specified but it does not exist.

Action: Specify Ipc_CREAT on the IPC get.

0307 JRIpcRetry

NOWAIT was specified but the operation could not be performed immediately.

Action: Reissue the request later.

0308 JRIpcSignaled

An IPC wait was interrupted by a signal.

Action: Process the signal.

0309 JRIpcBadFlags

Extraneous bits were set in the flags word parameter or in the mode flag bit field.

Action: Correct the syscall invocation.

030A JRMsqBadType

Message type must be greater than zero.

Action: Correct the syscall invocation.

030B JRMsqBadSize

The message length exceeds the system limit or is less than zero.

Action: Correct the syscall invocation.

030C JRMsqNoMsg

No message of the type requested was found.

Action: Invoke the syscall when a message of the type requested is on the message queue, or do not specify IPC_NOWAIT.

030D JRMsq2Big

The message to receive was too large for the buffer and MSG_NOERROR was not specified.

Action: Increase the buffer size, or specify MSG_NOERROR.

030E JRSema4BadAdj

The value specified would exceed the system limit for semadj.

Action: Do not use the UNDO flag in the semaphore operations; use semctl to reset the UNDO values and to look for user errors in the method of use.

030F JRSema4BadNOps

Number of semaphore operation exceeds the system limit.

Action: Either specify a smaller number of semaphore operations or ask your system administrator to change this system limit. This system limit is set by the IPCSEMNOPS parameter in a BPXPRMxx parmlib member. You can view this value using the ipcs -x shell command.

0310 JRSema4BadNSems

Semaphore ID already exists for the KEY, but the number of semaphores is less than requested.

Action: Either change the number of semaphores requested, or specify a different ID on the request.

0311 JRTypeNotPID

A msgrcv or msgsnd did not have its process ID as type.

Action: Msgget flags require process ID with TYPE operands.

0312 JRSema4BadSemN

The semaphore number is invalid.

Action: Choose a semaphore number from 0 to the number of semaphores - 1.

0313 JRSema4BadValue

The value specified would exceed the system limit.

Action: Specify a value less than or equal to 32&finespace;767.

0314 JRSema4BigNSems

The number of semaphores exceeds the system maximum.

Action: Either specify a smaller number of semaphores or ask your system administrator to change this system limit. This system limit is set by the IPCSEMNSEMS parameter in a BPXPRMxx parmlib member. You can view this value using the ipcs -x shell command.

0315 JRSema4ZeroNSems

The number of semaphores specified was zero and the semaphore does not exist.

Action: If the number of semaphores is zero, Ipc_CREAT should not be specified.

0316 JRShmBadSize

The shared memory segment size is incorrect or outside the system defined range of valid segment sizes.

Action: Specify a segment size less than the system defined maximum. When a shared memory identifier already exists for this key, specify a segment size that is less than the segment size specified on the shmget that created this segment. When a shared memory identifier does not exist for this key, specify a shared memory size greater than zero. You can also have your system administrator change the parmlib values to increase the maximum shared memory segment size. This system limit is set by the IpcShmNSegs parameter in a BPXPRMxx parmlib member. You can view this value using the ipcs -x shell command.

0317 JRShmMaxAttach

The number of shared memory attaches for the current process exceeds the system defined maximum.

Action: Detach shared memory segments not being used by the process and retry the operation. If the problem persists, request that your system administrator change this system limit. This system limit is set by the IPCSHMNSEGS parameter in a BPXPRMxx parmlib member. You can view this value using the ipcs -x shell command.

0318 JRIpcRemoved

During a wait, the IPC member ID was removed from the system.

Action: Stop using the IPC memory ID, which has been removed.

0319 JRMsqQBytes

Not permitted to increase message qbytes or attempt by superuser to set message qbytes exceeds system limit.

Action: If you are not a superuser, do not try to increase the message queue bytes. If you are, do not try to increase message queue bytes past the system limit or to change the system-imposed maximum. This system maximum is set with the IPCMSGQBYTES parameter in a BPXPRMxx parmlib member. You can view this value using the ipcs -x shell command.

031A JRBadPerfGroup

The specified priority or nice value represents a performance group that could not be used.

Action: Contact your system administrator.

031B JRBadServClass

The specified priority or nice value represents a service class that could not be used.

Action: Contact your system administrator.

031C JRMsqQueueFullMessages

IPC_NOWAIT was specified but the operation was not done because there was no room in the message queue due to the number of messages in the message queue.

Action: Increase the system limit for the number of messages per message queue, retry the operation when there is room in the message queue, or do not specify IPC_NOWAIT.

031D JRMsqQueueFullBytes

IPC_NOWAIT was specified and the operation was not done because there was no room in the message queue due to the number of bytes in the message queue.

Action: Increase the system limit for the number of bytes per message queue, retry the operation when there is room in the message queue, or do not specify IPC_NOWAIT.

031E JRRFileNoRead

A call tried to read a file opened without read access.

Action: Reopen the file for read or read/write access.

031F JRSemStorageLimit

The semget or semop failed because the semaphore storage limit was reached.

Action: Too many semaphore sets and/or too many UNDO structures.

0320 JRInheEye

The inheritance area contains an incorrect eyecatcher value.

Action: The eyecatcher value must be INHE. Reissue the BPX1SPN callable service with the correct eyecatcher value.

0321 JRInheLength

The length specified for the inheritance area contains an incorrect value.

Action: The length value must equal the constant value Inhe#len. Reissue the BPX1SPN callable service with the correct length value.

0322 JRInheVersion

The inheritance area contains an incorrect version number.

Action: The version number value must be equal to the constant Inhe#Ver. Reissue the BPX1SPN callable service with the correct version number value.

0323 JRSpawnTooManyFds

The count of file descriptors specified is greater than the maximum supported by the system.

Action: The file descriptor count must be less than constant value OPENMAX. Reissue the BPX1SPN callable service with the correct file descriptor count.

0324 JRSmNoStorage

There is no storage available to allocate.

Action: See your IBM service representative.

0325 JRSmDspservErr

The DSPSERV macro failed.

Action: See your IBM service representative.

0326 JRSmInvalidDsID

The data space group ID is not valid.

Action: See your IBM service representative.

0327 JRSmInvalidDsSToken

The data space SToken is not valid.

Action: See your IBM service representative.

0328 JRSmOutOfMasterCells

A Master Cell Pool is out of extent storage cells.

Action: See your IBM service representative.

0329 JRShmMaxSpages

The operation was not done because the system wide limit for shared memory segment pages was exceeded.

Action: Try again later. If the problem persists, ask your system administrator to change this system limit. This system limit is set by the IPCSHMSPAGES parameter in a BPXPRMxx parmlib member. You can view this value using the ipcs -x shell command.

032A JRNoAccess

Caller does not have access to function.

Action: This is an internal system call. You are not authorized to access this function.

032B JRSmInvalidLength

The length the requested storage exceeds maximum.

Action: See your IBM service representative.

032C JRFdListTooBig

The size of the file descriptor list is larger than can be currently supported.

Action: The file descriptor list must not exceed the available storage space in the caller's private area. Reissue the callable service with a smaller file descriptor list.

032D JRBadFdList

The file descriptor list supplied on the call to BPX1SPN is not accessible by the caller.

Action: The file descriptor list must be in storage accessible by the caller of BPX1SPN. Check the storage the specified file descriptor list resides in.

032E JRNotMapped

One or more specified pages are not mapped.

Action: An error was detected during the mprotect, msync, or munmap callable service. One or more storage pages in the specified address range are not part of an existing memory mapping. You can only operate on existing mappings.

032F JRClnyASCREFailed

The ASCRE macro issued to start a colony address space returned a failing return code.

Action: Ensure that the Address space name specified on the FILESYSTYPE parmlib statement in the BPXPRMxx member is correct or refer to the documentation of the ASCRE service.

0330 JRClnyStartFailed

A colony address space failed to initialize.

Action: Ensure that the ASName operand on the FILESYSTYPE parmlib statement in the BPXPRMxx member specifies a valid procedure name.

0331 JRClnyNotStopped

The colony address space could not be stopped.

Action: Ensure that there are no PFSes running in the colony address space and retry the request.

0332 JRClnyNoCommonStorage

The system was unable to obtain storage in common for a control block to represent a colony address space.

Action: The system is probably experiencing a common storage shortage and the request cannot be satisfied until the shortage is corrected.

0333 JRPfsNotDubbed

The PFS task calling an OSI service is not dubbed.

Action: The PFS address space must be dubbed before an independent task in that address space can make most OSI service requests. To be dubbed, the PFS can invoke getpid or almost any z/OS UNIX service.

0334 JRClnyNotStarted

An attempt was made to start a PFS within a colony address space. The colony was either not completely initialized or it was being terminated.

Action: Ensure that the colony is completely initialized and retry the request.

0335 JRPtyChgFromSlave

An attempt was made to change a termios flag from the slave pty, which is only allowed from the master.

Action: To make the change, issue the tcsetattr against the master pty.

0336 JRClnyPfsNotStarted

An attempt was made to stop or clean up a colony PFS that was not previously started.

Action: Issue the Stop request for a colony PFS that has previously been started.

0337 JRClnyPfsNotDone

An attempt was made to clean up a colony PFS that was not completely terminated.

Action: Ensure that the colony PFS is completely terminated and retry the request.

0338 JRCpbNotFound

No Cpb was found on the Cpb chain representing this colony PFS.

Action: See your IBM service representative.

0339 JRDevConfigTypeError

An attempt was made to configure a device driver that was not defined.

Action: Ensure that the device type is spelled correctly and retry the request.

033A JRPtyNeedPKT3270

An attempt was made to set 3270 Passthru mode without 3270 Packet mode.

Action: Use 3270 Passthru mode only on pty connections that operate in 3270 Packet mode. 3270 Packet mode can be set only from the master pty.

033B JRMmapOverEOF

The extended file cannot be mapped over its EOF point.

Action: The memory mapped file was extended and subsequently mapped beyond the original EOF point, while an existing memory map containing the original EOF point was outstanding. It is recommended that once a file is extended, perhaps via the write callable service, any memory map of the same file should be unmapped and remapped if the memory map contains the original EOF point.

033C JrRaiseHardLimit

An attempt was made to raise a hard limit without superuser authority.

Action: Do not attempt to raise a hard limit without superuser authority.

033D JrInvalidResource

The input resource value is not valid.

Action: Retry the request with a valid resource value.

033E JrSoftExceedsHard

An attempt was made to raise a soft limit above its hard limit.

Action: Do not attempt to raise a soft limit above its hard limit.

033F JrSoftBelowUsage

An attempt was made to lower a soft limit below the current usage for the resource.

Action: Do not attempt to lower a soft limit below the current usage for the resource.

0340 JrInvalidWho

The input who value is not valid.

Action: Retry the request with a valid who value.

0341 JrCPUTimeObtainFailed

Failure obtaining CPU time usage.

Action: See your IBM service representative.

0342 JrVsmListError

The VSMLIST macro failed.

Action: See your IBM service representative.

0343 JRPtyMutuallyExclusive

An attempt was made to set mutually exclusive bits.

Action: Select only one of the mutually exclusive bits in the termios.

0344 JRMmapStgExceeded

The system-wide limit on the amount of memory consumed by memory mapped areas is exceeded.

Action: Try again later. If the problem persists, either reduce the size of the memory mapping request, or request the system administrator to increase the MAXMMAPAREA parameter of the BPXPRMxx parmlib member.

0345 JRPathconf

The Vnode operation pathconf is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0346 JRNotPage

A location specified or generated is not on a page boundary.

Action: Specify the address and/or length in page multiples.

0347 JRMmapBadType

The value of the map_type is not valid.

Action: The map_type specified for mmap is not valid.

0348 JRHardware

A request was made for a hardware that is not available.

Action: A function was requested that required hardware that is not available on this processor.

0349 JRAddressNotAvailable

A request was made for a storage address, but it could not be satisfied.

Action: Either an address parameter was not valid or an address generated by one or more parameters is not valid.

034A JRProcMaxMmap

The process has exceeded the maximum number of mmaps.

Action: Reduce the number of mmaps used by the process.

034B JRMmapFileAddress

File_offset + map_length exceeds file size.

Action: Use fstat to determine the file size prior to mmap.

034C JRIarvServ

An invocation of IARVSERV service failed.

Action: Retry the operation at a later time.

034D JRPtyPendingControlInfo

An attempt was made to write to a master pty in 3270 packet mode when control information was pending.

Action: Issue a read to the master pty to obtain the control information. Then reissue the write.

034E JRZeroOrNegative

An input parameter must be greater than zero.

Action: Correct that parameter.

034F JRNoUserStorage

The service could not obtain enough storage in user address space subpool 129.

Action: Free storage in user address space subpool 129 and retry the service.

0350 JRAsynchMount

The request to mount a file system will complete asynchronously. The system rejects all vnode (file) operations against the file system.

Action: Use w_getmntent to determine when the mount completes.

0351 JRPfsOpNotSupported

The pfsctl command is not supported by this PFS.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0352 JRPfsOpNotPermitted

Not authorized to perform this pfsctl operation.

Action: The request must be made by an authorized user.

0353 JRPfsArgLenBad

The argument length is not valid for this pfsctl operation.

Action: Specify a valid length for this argument.

0354 JRDdBadConfigOpt

The CONFIGURE operation is not supported by this device driver.

Action: See your IBM service representative.

0355 JRDdConfigInbuf2Big

The CONFIGURE input buffer too large.

Action: See your IBM service representative.

0356 JRDdConfigOutbuf2Big

The CONFIGURE output buffer too large.

Action: See your IBM service representative.

0357 JRDdBadDdType

The device driver TYPE is not known to the system.

Action: See your IBM service representative.

0358 JRDdNoDdConfigure

The device driver TYPE does not support a dd_configure routine.

Action: See your IBM service representative.

0359 JRDdwtTaskTerm

The operation could not be completed because the device driver work thread terminated.

Action: See your IBM service representative.

035A JRDdConfigAbend

An abend occurred during dd_config processing.

Action: See your IBM service representative.

035B JRCaptureFailure

A memory capture (IARVSERV) failed.

Action: A CTrace record was writen with the return codes.

035C JRHotCCreateFailure

An attempt to create a Hot C environment for a physical file system failed.

Action: See your IBM service representative.

035D JRVdacError

The Vdac macro failed.

Action: See your IBM service representative.

035E JRBadSiginfoAddr

An incorrect siginfo_t address was passed to the waitid call.

Action: Reissue the call to the wait service (BPX1WTE) with an siginfo_t return area address that is accessible to the caller.

035F JRBadRUsageAddr

An incorrect rusage address was passed to the wait3 call.

Action: Reissue the call to the wait service (BPX1WTE) with an rusage return area address that is accessible to the caller.

0360 JRPtyNoTRTStorage

Storage is not available for pseudo-TTY scan tables.

Action: Retry the request. If this condition persists, contact the system programmer.

0361 JRBadStDev

The device number specified to osi_mountstatus does not refer to a mounted file system.

Action: Use w_getmntent to determine the correct device number (MNTENTFSDEV).

0362 JRDdNoDdwt

The device driver task is not active.

Action: See your IBM service representative.

0363 JRBadInputBufAddr

Bad input buffer address.

Action: See your IBM service representative.

0364 JrOpenFileLimitMax

The Open file limit cannot exceed 524287.

Action: Select a hard limit that is smaller than the physical system maximum.

0365 JrFdOpenAboveLimit

A file descriptor is open above requested limit.

Action: Select a limit which is greater than the highest open file descriptor.

0366 JrWriteBeyondLimit

Cannot write beyond the file size limit.

Action: Increase the file size limit for the process, or write less data to the file.

0367 JrSyscallFailAll

An attempt to process a syscall for a socket failed on all of the transport providers supporting the socket.

Action: Close the socket. See the return code for more information about the failure.

0368 JrSyscallFailOne

An attempt to process a syscall for a socket failed on one of the transport providers supporting the socket.

Action: Close the socket. See the return code for more information about the failure.

0369 JrSyscallFailSome

An attempt to process a syscall for a socket failed on some of the transport providers supporting the socket.

Action: Close the socket. See the return code for more information about the failure.

036A JrSetSockOptFailAll

An attempt to set socket options failed on all of the transport providers supporting the socket.

Action: If the socket option is not supported, reissue the syscall with the correct option. See the return code for more information about the failure.

036B JrSetSockOptFailOne

An attempt to set socket options failed on one of the transport providers supporting the socket.

Action: Different socket options are now in effect for each of the transport providers. If a specific option is required, you have to bind to a specific IP address that supports the specified option. To synchronize all the transport providers with the same socket options, close the socket, then reopen it with the socket syscall. See the return code for more information about the failure.

036C JrSetSockOptFailSome

An attempt to set socket options failed on some of the transport providers supporting the socket.

Action: Different socket options are now in effect for each of the transport providers. If a specific option is required, you have to bind to a specific IP address that supports the specified option. To synchronize all the transport providers with the same socket options, close the socket, then reopen it with the socket syscall. See the return code for more information about the failure.

036D JrRlimitCantCreate

You cannot create files when RLIMIT_FSIZE is 0.

Action: Increase the process file size limit and issue the create again.

036E JRBadOutputBufAddr

Bad output buffer address.

Action: See your IBM service representative.

036F JRNotStdFile

Only standard files can be mmap.

Action: Use the file descriptor of a standard file.

0370 JRBadIDType

An invalid ID type was passed.

Action: Reissue the call with a valid ID type.

0371 JRBadOptions

Incorrect options were passed on the options parameter.

Action: Reissue the call with valid options.

0372 JRCdstAlreadyAdded

Character special service routine detected an ADD request for a previously completed CDST entry.

Action: See your IBM service representative.

0373 JrDdConfigNoResource

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0374 JrDdNotConfigured

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0375 JrDdConfigBadOpt

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0376 JrTbmStorageFailure

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0377 JrTbmAttachFailure

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0378 JrTbmLatchSetFailure

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0379 JrOcsNotConfigured

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

037A JrOcsDevNotConfigured

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

037B JrDevUnfigPnd

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

037C JrRtyDevConfigChange

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

037D JRPtyNotCntlTerm

The device is not associated with a controlling terminal.

Action: The device specified is not associated with a controlling terminal. Correct the program or rerun it in an environment where the device is a controlling terminal.

037E JrOcsAdminBufferExceeded

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

037F JrRtyBadMultiByteCodePageName

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0380 JrOcsRtyOutBufferExceeded

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0381 JRPrevSockError

A previous error caused this socket to become unusable.

Action: Close the socket.

0382 JrOcsNotConnected

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0383 JrRtyDifferentFIle

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

0384 JRBadOsi

The Osi structure passed is not valid.

Action: Ensure that the Osi structure passed to the OSI routine is the Osi structure received from the LFS on this operation.

0385 JRBadPfsId

The value of the OsiPfsId field is not valid.

Action: Ensure that the Osi structure passed to the OSI routine is the Osi structure received from the LFS on this operation.

0386 JRFRRActive

An FRR is established.

Action: Do not establish a functional recovery routine (FRR) before calling a service that may be interrupted by a signal.

0387 JRPtyQueueChange

A termios option change requires all output be read or flushed before further writes.

Action: Retry the slave pty write after all output has been read from the master pty.

0388 JRIntervalTypeInvalid

The IntervalType is not valid.

Action: See the ITIMER_.. constants in BPXYITIM or See z/OS UNIX System Services Programming: Assembler Callable Services Reference for details.

0389 JrRtyNoResource

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

038A JrRtyTermSyscall

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

038B JrRtyNoReply

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

038C JrOcsErrno

OBSOLETE - DO NOT USE.

Action: See your IBM service representative.

038D JRPtyOrphaned

The syscall is processing in an orphaned process group.

Action: This condition most likely occurs when a process that is forked from the session leader (generally the shell) issues a syscall to the pseudo-TTY device after the session leader process has ended. The process cannot access the terminal once the session leader process ends. This pseudo-TTY session is no longer usable. Restart the application from another session.

038E JRTransportDriverNotAccessible

The transport driver specified is not being used by the socket specified.

Action: Verify the address specified is proper for this socket.

038F JRInvSignalForProcess

The specified signal number is incorrect.

Action: The specified signal number is thread-scoped and is only supported under pthread_kill. It cannot be used in a process-scoped command like raise, kill, killpg, or sigqueue. Reissue the request with a correct signal number, or reissue the signal using pthread_kill.

0390 JRUserNameBad

The user name is not a valid MVS user name.

Action: Ensure that the user name contains all legal characters for a MVS user name.

039E JRTooManyFds

Too many Fds were specified.

Action: Reduce the number of Fds that were specified to a number that is supported by the syscall.

039F JRMicroSecondsTooBig

The value specified for microseconds is outside the allowable range.

Action: Change the value specified for microseconds to be less than 1&finespace;000&finespace;000 (1 million).

03A0 JrSockPrerouterErr

The Common Inet Sockets Prerouter returned an error.

Action: See your IBM service representative.

03A1 JROsiAbend

An abend occurred in an Operating System Interface routine.

Action: See your IBM service representative.

03A2 JRSTIMERMMax

A 32E system abend has been intercepted by the syscall. See the appropriate MVS System Codes manual.

Action: Reduce the number of STIMERMs that are active.

03A3 JRNoClnyThreadSppt

Colony thread support has not been built.

Action: Ensure that colony thread support was requested by the PFS at initialization time.

03A4 JRSHSPMASK

The shared subpool mask is not valid for the current environment.

Action: The shared subpool mask specified on the BPX1PTC invocation does not match the mask specified on the initial call to BPX1PTC within the current process image. Only one shared subpool mask is supported for a given process image. Reissue the BPX1PTC callable service with the shared subpool mask that was specifed on the first BPX1PTC call.

03A5 JrOWaitSetupErr

An error occurred attempting OsiWait setup.

Action: See your IBM service representative.

03A6 JrBadOptnFlags

Extraneous bits were set in the option flags parameter.

Action: Correct the input parameter.

03A7 JrNegFileSizeLimit

One of the file size limits specified is negative.

Action: Specify a file size limit that is greater than or equal to zero.

03A8 JrNoSAFsupport

The installed Security product does not support this function.

Action: Install a security product that does support this function.

03A9 JRPtNoStorage

Not enough storage is available for ptrace.

Action: A Pt_Capture request is unable to obtain enough buffer storage.

03AA JRPtBufNotFound

A Pt_Uncapture ptrace request was issued for a specific buffer but the buffer was not previously captured with a Pt_Capture request.

Action: Use the Pt_Capture request before using Pt_Uncapture for a specific buffer.

03AB JRPtTso

The specified ptrace function is not supported in a TSO address space.

Action: Do not try to use the ptrace request in question on a program in a TSO address space.

03AC JRAuthCaller

The caller of this service is authorized. Authorized callers are not permitted to load or call unauthorized programs or programs residing in a file system mounted with the NOSETUID parameter.

Action: System key, supervisor state, or APF authorized callers cannot load or call unauthorized programs. A program with the APF attribute is considered unauthorized if it resides in a file system mounted with the NOSETUID parameter.

03AD JrSingleTDReqd

The Common Inet Sockets ioctl command requires that a single transport driver be connected to the socket.

Action: Use the ioctl IocC#TcCN command or the bind service, to connect with a single transport driver before issuing the failing ioctl command.

03AE JRBatSel

The batch-select VFS operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

03AF JRRealPageNotSupported

A Fuio area containing a real page address was passed.

Action: Ensure that the Fuio provided contains only virtual page addresses and that the FuioRealPage flag indicator is off.

03B0 JRBadMVSPgmName

A call to the exec or loadHFS service specified a file that resolves to an MVS program name that is not valid.

Action: Ensure that the external link for the specified file is a valid MVS program name.

03B1 JRMVSLoadFailure

A call to the loadHFS service resulted in a failure in the MVS Load service.

Action: Ensure that the specified HFS file points to a MVS program that is loadable by the caller.

03B2 JRMVSPgmNotFound

A call to the exec or loadHFS service specified a file that resolves to an MVS program that cannot be found.

Action: Ensure that the specified HFS file points to a MVS program that exists in the caller's MVS program search order.

03B3 JRNoConsoleBuffers

The write to /dev/console cannot complete.

Action: Attempt the request at another time.

03B4 JRPtMaxCapture

The ptrace capture request would exceed maximum allowed.

Action: A Pt_Capture request would exceed the maximum amount of captured storage allowed.

03B5 JRCPCNnotEnabled

Code Page Change Notification is not enabled.

Action: A tcsetcp or tcsettables must be done to enable the CPCN (Code Page Change Notification) function.

03B6 JRExitAbend

An abend occurred in a File Exporter Exit.

Action: See your IBM service representative.

03B7 JRShrStgShortage

Request for shared storage exceeds amount available.

Action: A mmap or shmget call resulted in a request for shared system storage that exceeds the amount available as specified by the MAXSHAREPAGES statement in the BPXPRMxx parmlib member.

03B8 JRPtyNeedPKTXTND

An attempt was made to set 3270 Passthru mode without 3270 Packet mode.

Action: Use 3270 Packet mode only on pty connections which operate in Extended Packet mode. Extended Packet mode can be set only from the master pty.

03B9 JRWaitForever

The timeout value specified wait forever, but there were no events to wait for.

Action: Reissue the request specifying at least one event in the pollfd structures, or change the timeout value to something other than -1.

03BA JRInvalidNfds

The NFDS parameter is larger than the OPEN_MAX (MAXFILEPROC) value.

Action: Reissue the request specifying a value for the NFDS parameter that is less than OPEN_MAX or ask the system programmer or system administrator to increase the MAXFILEPROC value in the BPXPRMxx parmlib member.

03BB JRClnyPfsNotAllowed

The requested operation is not allowed for a PFS that is running in a Colony Address Space.

Action: See your IBM service representative.

03BC JRPtyNotMaster

Unsupported function against slave TTY.

Action: The requested function is not allowed against a slave pseudo-TTY. Correct the program and rerun.

03BD JrFsUnAuthClnt

An unauthenticated client is denied access.

Action: A server working on behalf of an unauthenticated client is not allowed to access files on a remote system. Log on to the server with a password to become authenticated and try again.

03BE JRBadBufLen

The length of the buffer is not valid.

Action: The total buffer length specified for this request must be less than or equal to 62&finespace;464. Retry the request specifying a valid buffer length parameter.

03BF JRBadStgKey

The message data could not be fetched using the specified storage key.

Action: The buffer was allocated in a storage key that did not match the specified key for the MSGSTGKEY parameter. Retry the request specifying a valid storage key.

03C0 JRIxcMsgo

An unexpected error occurred in the IXCMSGO macro.

Action: See your IBM service representative.

03C1 JrNoFdsTooManyQIds

The number of Fds specified is negative or too many Msg Q Ids specified on select or poll service.

Action: Specify a non-negative number of Fds or reduce the number of Msg Q Ids to be processed for select or poll below the maximum number of Msg Queues supported by the system.

03C2 JRInvHdr

Invalid parameter list header.

Action: The structure containing the service parameters contained an incorrect eye-catcher or length. Correct the program and rerun.

03C3 JRIxcMsgi

An unexpected error occurred in the IXCMSGI macro.

Action: See your IBM service representative.

03C4 JRIXCXCDSIfail

An unexpected error occurred in the IXCXCDSI macro.

Action: See your IBM service representative.

03C5 JRIXCXCDSIenv

An environmental error occurred in the IXCXCDSI macro.

Action: See your IBM service representative.

03C6 JRIXCXCDSInoCDS

An environmental error occurred in the IXCXCDSI macro, OMVS CDS not available.

Action: See your IBM service representative.

03C7 JRIXCXCDSIinvparm

An invparm error occurred in the IXCXCDSI macro.

Action: See your IBM service representative.

03C8 JRIXCXCDSIaccess

An invparm error occurred in the IXCXCDSI macro, not able to access dataarea or token.

Action: See your IBM service representative.

03C9 JRIXCXCDSIvalidate

An invparm error occurred in the IXCXCDSI macro, validate failed for dataarea or token.

Action: See your IBM service representative.

03CA JROutOfMountEntries

The system is unable to obtain an entry in the file system mount table in the OMVS couple data set.

Action: Either free an entry by unmounting a file system, or request your system programmer to create a new OMVS couple data set which supports a larger number of mounts. The system programmer will need to run the XCF couple data set format utility for TYPE(BPXMCDS) to increase the number of MOUNTS supported then issue the SETXCF COUPLE operator command to add the new OMVS couple data set as the alternate and then PSWITCH to make the alternate couple data set the primary couple data set for OMVS.

03CB JRPtyUnsupportedAttr

Attempt to change attribute to unsupported value.

Action: An attempt was made to change one or more attributes in the termios to unsupported values, and no supported attributes were changed.

03CC JRTgtMemberInactive

The XCF member represented by the input member token is not active. For a Shared File System configuration, this can occur when a system is attempting to send a message to another system and that target system is no longer active in the configuration.

Action: Ensure that the correct target member token was specified. If the target member is not active, any action taken depends on your application. For a Shared File system configuration, retry the operation as it is usually a recoverable error.

03CD JRnoSavedToken

The saved IXCXCDSI token is zero for a request that expects a valid token.

Action: See your IBM service representative.

03CE JRStaleVfs

The Vfs passed to complete asynchronous mount does not represent an outstanding asynchronous mount.

Action: Ensure that the correct Vfs is supplied.

03CF JRNoArea

The State Area has not been established.

Action: A Write must be the first operation.

03D0 JRBadSubField

A subfield of the Argument is not valid.

Action: Examine each arg subfield for correctness.

03D1 JRNoChangeIdentity

The invoker is not authorized to change MVS userids.

Action: Daemon authorization is required for this function.

03D2 JRBadId

An incorrect ID value was passed to the BPX1WTE service.

Action: Respecify a valid ID value on the BPX1WTE service call.

03D3 JRNoWorkUnit

Attempt to transfer work via BPX1SPW call failed.

Action: A get work call via BPX1SPW must be made to obtain a work unit before a transfer can be done.

03D4 JrNoWLMConn

Attempt to refresh work via BPX1SPW call failed.

Action: A succesful call to BPX1SIN must be made to connect to WLM before a refresh can be done.

03D5 JRMgcreErr

MGCRE macro invocation failed on BPX1SPW call.

Action: See your IBM service representative.

03D6 JrNoMulti

Attempt to issue multiple BPX1CCS calls.

Action: There can only be one Console Modify listening thread actively engaged at one time per address space.

03D7 JrMsgLengthErr

Message length to the console was exceeded.

Action: Check syscall documentation for maximum length.

03D8 JRInvalidClassify

The classification area is not accessible to the current caller.

Action: The address or length of the classification data passed was not valid. Retry the request with a valid address and length for the classification data area.

03D9 JrNoEnclave

No enclave is associated with the calling thread or process.

Action: A get work call to BPX1SPW must be done to obtain a work unit prior to performing a transfer work unit.

03DA JrSubSysNotFnd

No process was found with the associated subsystem type and subsystem name.

Action: A work manager must be established with BPX1SIN prior to transferring work.

03DB JRApplDataLenErr

The application data area is too large to be processed.

Action: Reduce the amount of application data being passed via BPX1SPW.

03DC JrBadOptCode

Bad entry code to process work unit.

Action: See your IBM service representative.

03DD JRInvalidApplData

The application data area passed was not accessible.

Action: The address or length of the application data passed to BPX1SPW was not valid. Retry the request with a valid address and length for the application data area.

03DE JRInvalidApplData2

The application data area is not accessible to the current caller.

Action: The caller's key is different than the area previously obtained for the application data. Retry the BPX1SPW request with the same key as previously used.

03DF JRInvalidSFDL

The file descriptor list passed was not accessible.

Action: The address of the file descriptor list or the count field within the list was not valid. The area may be in an incorrect storage key. Retry the BPX1SPW request with a valid address and count.

03E0 JRNewLocationErr

The new tag data area passed was not accessible.

Action: The address or length of the new tag data passed was not valid. Retry the request with a valid address and length.

03E1 JROldLocationErr

The old tag data area passed was not accessible.

Action: The address or length of the old tag data area was not valid. Retry the request with a valid address that points to a 66 byte area.

03E2 JRNewLenBad

The new tag data length was not valid.

Action: The length of the new tag data area is outside of the allowable range. Retry the request with a valid new tag data length.

03E3 JrMsgAttrErr

Message attribute error detected.

Action: The length passed must be equal to the current version, and the CCAID and CCAVERSION must be initialized to the constants defined in BPXYCCA.

03E4 JRNoAck

No acknowledgement signal from remote system.

Action: The transmitted data may be lost. User should transmit the data again.

03E5 JRIPAddrNotAllowed

The input IP address is not valid.

Action: See your IBM service representative.

03E6 JRPrevBound

The requested port number is in use.

Action: See your IBM service representative.

03E7 JRInaccessible

The user storage is inaccessible.

Action: Make sure user storage is accessible and key 8.

03E8 JRIefddsrvFailed

The macro IEFDDSRV failed.

Action: Make sure the specified gateway address or IP address is correct.

03E9 JRSvc99Failed

SVC 99 (Allocate) failed.

Action: The specified device cannot be allocated. It may have already been allocated. Make sure that the gateway address is specified correctly.

03EA JRDevNotOnline

Specified device is not online.

Action: The specified device is not online. Verify that the gateway address is specified correctly. If correct, then verify that it is online.

03EB JRDevNotFound

Specified device is not found.

Action: The specified device cannot be found. Make sure that the gateway address is specified correctly.

03EC JRAlreadyInProgress

Another config request is in progress.

Action: Wait until the other config completes.

03ED JRInvalidVersion

Config request has invalid version number.

Action: Use correct version number.

03EE JRNotAuthWLM

Server_init service call failed permission check for BPX.WLMSERVER facility class profile.

Action: Caller must be given read permission to BPX.WLMSERVER facility class profile in order to use the server_init service successfully.

03EF JRTargetIPNotFound

Target IP address cannot be found.

Action: Caller must define target ip address using config.

03F0 JRESCONNotConfigured

The ESCON connection is not configured.

Action: Use the configstk command to configure the desired ESCON connection and then retry this operation.

03F1 JRPtySlaveLocked

A grantpt() was issued against the master pty but an unlockpt() has not yet been issued.

Action: Either issue an unlockpt() or do not use grantpt(). Without grantpt() slave permissions are set at the first slave open.

03F2 JRPtySlaveNotLocked

The slave pty is not locked either because grantpt was not done or because grantpt has already been issued.

Action: Either issue a grantpt() before the unlockpt() or do not use unlockpt(). Without grantpt/unlockpt, permissions are set at the first slave open.

03F3 JRPtyGrantptDone

grantpt() has already been issued. This grantpt is redundant.

Action: Remove one of the grantpt() calls.

03F4 JRSRBSNotAllowed

Issuing syscalls from an SRB is not allowed.

Action: The calling process is either in termination or has reached its limit on concurrent SRBs issuing z/OS UNIX callable services. If the process is not in termination, reissue the callable service. When returned with ENOSYS this means the program on an SRB has made a call for a Physical File System that does not support SRB mode callers.

03F5 JRNotSRBSyscall

The syscall requested is not supported in SRB mode.

Action: Either issue the callable service from task mode or use another callable service to perform the function required.

03F6 JRRTSSConnErr

Fork child processing failed due to a RTSS connection error.

Action: Contact the system programmer to determine if the RTSS subsystem is up and operational.

03F7 JRRTSSEnvErr

Fork parent processing failed due to a RTSS environment error.

Action: Contact the system programmer to determine if the RTSS subsystem is up and operational.

03F8 JRAsyncAuthErr

User is not authorized for asynchronous i/o.

Action: Issue the requested function synchronously.

03F9 JRAsyncRWLenZero

Zero length asynchronous read or write not permitted.

Action: Issue the requested function synchronously.

03FA JRAsyncBadMsgHdrLen

AioBuffSize is not set to correct message header length.

Action: Set AioBuffSize to the correct value and reissue the request.

03FB JRAsyncBadCmd

AioCmd is not set to a supported value.

Action: Set AioCmd to a supported value and reissue the request.

03FC JRAsyncBadNotifyType

AioNotifyType is not set to a supported value.

Action: Set AioNotifyType to a supported value and reissue the request.

03FD JRAsyncBadOffset

AioOffset is a negative value.

Action: Set AioOffset to a non-negative value and reissue the request.

03FE JRAsyncBadAiocbLen

The input length for the AioCb is not a supported length.

Action: Set the length parameter to the supported length for an AioCb.

03FF JRAsyncBadSockAddr

The AioSockAddrPtr, AioSockAddrLen, AioLocSockAddrPtr or AioLocSockAddrLen contains a bad value.

Action: Set AioSockAddrLen (or AioLocSockAddrLen) to a zero value or set AioSockAddrPtr (or AioLocSockAddrPtr) to the address of an area to receive a sockaddr structure and set AioSockAddrLen (or AioLocSockAddrLen) to the length of that area.

0400 JRSchedSrbErr

The Srb was not scheduled.

Action: See your IBM service representative.

0401 JRBadArq

An invalid Arq was encountered.

Action: See your IBM service representative.

0402 JRCancel

Vnode operation CANCEL is not supported by this file system.

Action: Verify that the operation was performed on a physical file system that supports the operation.

0403 JRDuplicateCancel

A cancel operation is already in progress for the target asyncio request.

Action: Wait for the previous cancel request to complete.

0404 JRAsyncNotSingleTd

The AsyncIO operation can not be performed because this socket does not have a chosen transport stack.

Action: Issue pfsctl(BPX1PCT) with the SetAsyncIO or SetIbmOpt option to choose an asynchonous I/O capable transport.

0405 JRSMFNotAuthorized

The __smf_record function can not be performed because the caller is not permitted to the BPX.SMF facility class and is not APF authorized. The caller must either be permitted to the facility class or APF authorized.

Action: If the user is to be permitted to use the __smf_record function, the user must be permitted to the BPX.SMF facility class or be APF authorized.

0406 JRSMFNotAccepting

SMF is not recording SMF records of the type and subtype requested.

Action: Do not build SMF records for this type and subtype, they are not being recorded.

0407 JRSMFNotActive

SMF is not active.

Action: Do not build SMF records for this type and subtype, they are not being recorded.

0408 JRSMFError

An error occurred in the SMFEWTM SMF macro.

Action: See your IBM service representative.

0409 JRSMFBadRecordLength

The length of the SMF record passed to __smf_record is either too large or too small.

Action: Correct the SMF record size passed to the __smf_record function.

040A JREnclavesExist

The calling work manager has enclaves that it created that have yet to be serviced.

Action: Reissue the SRV_DISCONNECT_COND function on server_pwu later to allow all created enclaves to be serviced.

040B JRBindNotDone

Bind() must be issued before issuing read/write.

Action: Issue Bind() and try request again

040C JRQhitRecovery

BPXXQHIT macro reportedly entered recovery.

Action: See your IBM service representative.

040D JRPingSelf

Ping to self is not supported.

Action: Do not ping to self

040E JRDuplicateReq

Requested connection already exists.

Action: The oeifconfig request to add a connection failed because the connection already exists. You must issue the oeifconfig command to delete the existing connection before you can add it again.

040F JRTrleNotFound

Target TRLE name cannot be found.

Action: Requested TRLE name cannot be found. Caller must define target MPC TRLE resource before using oeifconfig to retrieve it.

0410 JRBpxxuiwrErr

The BPXXUIWR macro failed.

Action: See your IBM service representative.

0411 JRFastPathRange

A new socket descriptor is too large for Fastpath.

Action: The call to setrlimit() for RLIMIT_NOFILE must be moved to before the first call to socket() when a program is using the _BPXK_INET_FASTPATH environment variable.

0412 JrRosAlreadyReg

An error occurred during process signal initialization.

Action: Kernel handling of async I/O can not be done if another Signal Interrupt Routine has aready been registered.

0413 JRAsyncSigKey0Err

A caller in key 0 cannot request signals for async i/o.

Action: Request another method of notification for async i/o completion.

0414 JRAsyncExitModeTcb

A request for ExitMode of TCB was requested for a user who is either not running on a TCB or running in key 0.

Action: Request ExitMode of SRB or change the user key.

0415 JRAsyncOpNotSupp

The AsyncIO operation can not be performed because the socket transport does not support asynchronous I/O or asynchronous select included a physical file system that could not support this operation.

Action: Issue pfsctl(BPX1PCT) with the SetAsyncIO or SetIbmOpt option to choose an asynchonous I/O capable transport. In the case of asynchronous select, part of the operation runs on a system SRB so descriptors for PFSes that don't support SRB mode callers can not be included.

0416 JRAsyncBadSigNo

The AsyncIO operation specified a signal number that does not fall within the valid range of values.

Action: Specify a signal number which falls within the valid range of values.

0417 JRPriviligedFile

The operation is not allowed on a priviliged file.

Action: Reset priviliged attributes on file and retry the operation.

0418 JRRouteExists

The oeifconfig contained a duplicate destination IP address.

Action: Verify the address being added. Delete and re-add.

0419 JRHomeExists

The oeifconfig contained a duplicate home IP address.

Action: Verify the address being added. Delete and re-add.

041A JRAPFNotAuthorized

The chattr function can not be performed to change the APF attribute because the caller is not permitted to the BPX.FILEATTR.APF facility class.

Action: If the user is allowed to use chattr to change the APF attribute, the user must be permitted to the BPX.FILEATTR.APF facility class.

041B JRPGMNotAuthorized

The chattr function can not be performed to change the program control attribute because the caller is not permitted to the BPX.FILEATTR.PROGCTL facility class.

Action: If the user is allowed to use chattr to change the program control attribute, the user must be permitted to the BPX.FILEATTR.PROGCTL facility class.

041C JRProgCntl

A request to load an HFS executable that is not program controlled was made into an environment that must be kept clean.

Action: If the program is to be loaded into this environment it must have the program controlled attribute.

041D JRFileSzExcdLimit

A request to load a file into the LFS Cache was made for a file that exceeds the size limit of the cache.

Action: If a file is to be loaded into the LFS Cache, it must obey file size limitations.

041E JRFileIsEmpty

A request to load a file into the LFS Cache was made for a file that is empty.

Action: If a file is to be loaded into the LFS Cache, it must have contents.

041F JRCacheNotRegFile

Requests to load a file into the LFS Cache are valid for only regular files.

Action: If a file is to be loaded into the LFS Cache, it must be a regular file.

0420 JRNotMVSLocalFile

Requests to load a file into the LFS Cache are valid for only local files.

Action: If a file is to be loaded into the LFS Cache, it must be a local file.

0421 JRFileInUse

The file cannot be loaded into the LFS Cache because the file is currently in use or the cleanup daemon has not completed.

Action: After the file is no longer in use, wait 10 minutes and then reissue the command.

0422 JRNoFreeEntry

No free entries in the interface control array.

Action: All entries in the interface control array are currently in use. The oeifconfig request cannot be processed. Please try again later.

0423 JRInheUserId

User Id specified in Inheritance structure is not valid.

Action: Re-issue Spawn with a valid User Id in the Inheritance Structure.

0424 JRInheRegion

Region size specified in Inheritance structure is not valid.

Action: Re-issue Spawn with a valid Region Size in the Inheritance Structure.

0425 JRInheCPUTime

CPU Time specified in Inheritance structure is not valid.

Action: Re-issue Spawn with a valid CPU Time in the Inheritance Structure.

0426 JRInheAcctDataPtr

The account data pointer in the Inheritance structure points to a location not addressable by the caller.

Action: Re-issue Spawn with InheAcctDataPtr containing the address of a location the caller has access to.

0427 JRInheCWD

CWD specified in Inheritance structure is not valid.

Action: Re-issue Spawn with a valid CWD in the Inheritance Structure.

0428 JRTooManyIntf

Too many configured interfaces already exist.

Action: The maximum number of interfaces (VTAM® resources) have been configured. New interfaces cannot be configured unless some existing interfaces are unconfigured (detached). Retry the oeifconfig after removing some unneeded interfaces.

0429 JRBadIpAddr

An IP address in the configured interface is incorrect.

Action: An error was detected during the VTAM channel initialization process. One of the following occur:
  • The partner IP address in the input USERDATA area does not match our local IP address.
  • The Local IP address in the input USERDATA area does not match our remote partner IP address.
Ensure that the IP address specified in the oeifconfig command is correct for the intended remote partner. Retry the oeifconfig command after correcting the error.
042A JRDataNotAvail

No data exists to return to the caller.

Action: Try again later.

042B JRReqDenied

The oeifconfig request is not accepted.

Action: The loop back interface (interface name of LO0) cannot be detached. It can only be deactivated.

042C JRBadMtuSize

The specified MTU size for the interface is incorrect.

Action: An error was detected during the VTAM channel initialization process. One of the following errors occur:
  • The communications partner specified a non-zero MTU size that does not match MVS' local MTU size. By default, MVS uses an MTU size of 32&finespace;768.
  • The partner specified a non-zero MTU size that is greater than the "maximum send size" or the "maximum receive size".
No MTU error checking is done if the specified MTU value is zero. Issue the oenetstat -i command on MVS and its equivalent command on the remote partner to display the MTU size being used. Retry the oeifconfig command after correcting the error.
042D JRNotOsa

Current® interface is not an OSA adapter.

Action: An error was detected during the VTAM channel initialization process. the oeifconfig command specified the (remote partner) interface as an OSA adapter. However, the user data from the remote partner says otherwise. Correct the error and reissue the oeifconfig command.

042E JRBadOsaPort

Incorrect OSA port number specified.

Action: The oeifconfig command specified an invalid OSA port number. Only port number 0 is currently supported. Correct the error and reissue the oeifconfig command.

042F JRJsrCIErr

A request to convert JCL to SWA control blocks failed.

Action: See your IBM service representative.

0430 JRJsrRsErr

A request to create a JSAB for a Forked space failed.

Action: See your IBM service representative.

0431 JRJsrRacXtr

A call to RACROUTE failed.

Action: See your IBM service representative.

0432 JRJsrUavXit

The IEFUAV exit rejected account data.

Action: See your IBM service representative.

0433 JRJsrItjt

The IEFITJT routine had an internal error.

Action: See your IBM service representative.

0434 JRJsrInt

Internal error from BPXPRJSR.

Action: See your IBM service representative.

0435 JRJsrSetUp

Error setting up running environment.

Action: See your IBM service representative.

0436 JRWlmWonErr

An IWMUWON request to create a child address space failed.

Action: See your IBM service representative.

0437 JRForkExitRcOverlayPgmNotValid

Contents Supervisor Fork Exit cannot fork overlay programs.

Action: The contents supervision fork exit detected that a overlay program is present in the caller's environment. Overlay programs cannot be propagated on fork. Either use an alternative to fork, such as spawn, or eliminate the usage of overlay programs when using the fork function.

0438 JrMsgMaxLines

Maximum number of lines was exceeded.

Action: Check syscall documentation for maximum number of lines that can be written to console at one time.

0439 JRRddPlusNoCursorSupp

FuioRddPlus is only supported with the index protocol, not the cursor protocol.

Action: Specify FuioRdIndex to be greater than 0.

043A JRBadMaxSendRcvSize

Incorrect Maximum send/receive size value specified.

Action: An error was detected during the VTAM channel initialization process. One of the following errors occur:
  • The maximum send size parameter value is less than 32768. The maximum send size parameter value must be at least 32K (32768). The maximum send size may be specified under the MAXBFRU keyword of the Transport Resource List Element (TRLE). That value should be set to at least 9 (size in number of 4K pages).
  • The partner specified a non-zero MTU size that is greater than its "maximum receive size".
Retry the oeifconfig command after correcting the error.
043B JRPtLDTooManyExtents

The ptrace loader information request failed because a load module had more than 16 extents.

Action: A debugger program tried to read loader information for a load module with more than 16 extents.

043C JRBadHandle

The lock handle on the lock parameter is not 0.

Action: Set the lock handle to 0 and reissue the lock request.

043D JRNoDefault

Common Inet is running, but there are no transport providers active to run as a Default.

Action: Local Inet cannot run as part of Common Inet without at least one other AF_INET provider also active. Initialize the provider already defined in the BPXPRMxx parmlib member.

043E JRBlocksInFlux

Unable to access internal blocks without lock.

Action: Determine the status of the process in question and retry the __getthent request for this process or request a different process.

043F JRLinetFail

Local inet not correctly set up.

Action: Either the local INET was started without bringing up the Converged Sockets file system, or the Converged Sockets file system was started with only local INET. Converged Sockets must be brought up with at least one other file system in order for local INET to be started.

0440 JRNoEphemeralPorts

The supply of ephemeral port numbers is exhausted.

Action: Verify that socket applications using this stack really need the port numbers. The ephermeral port range can only be increased by reducing the CINET INADDR_ANY range.

0441 JRSocketSynReceived

A SYN was received on the socket connection.

Action: The socket connection was dropped. Re-establish the socket connection.

0442 JRSocketRstReceived

A RST was received on the socket connection.

Action: The socket connection was dropped. Verify the status of the remote partner. Then re-attempt the socket connection.

0443 JRSelfConnect

Connect to self is not allowed.

Action: Use a different ip address.

0444 JRAlreadyConn

The socket is already connected.

Action: The socket is already connected to the partner socket. If the connection is not usable then close() the socket and establish a new socket connection.

0445 JRNotStream

The socket operation is only valid for a stream socket.

Action: The syscall did not complete successfully. Only use the socket service for a socket of type stream.

0446 JRSocketConDropped

The socket connection was severed.

Action: The socket connection was dropped. Re-establish the socket connection.

0447 JRMpMuProcess

Operation not permitted in a Multiproc/Multiuser process.

Action: The caller's process is in a multiprocess address space and has its own process level security environment. The operation is not permitted in this environment. Retry the operation again from a non-multiproc/multiuser environment.

0448 JRTLSCertIDLenInvalid

The certificate structure has an incorrect length associated with it.

Action: Verify the parameter containing the length of the certificate structure.

0449 JRTLSCertTypeInvalid

The type of certificate used is not valid.

Action: Verify the parameter containing the type of certificate and ensure it is a known type.

044A JRTLSCertLengthInvalid

The length of the certificate is not valid.

Action: Check the parameter associated with the length of the actual certificate and ensure it is correct.

044B JRNoINITACEE

There is no SAF service available to manage a certificate authorization.

Action: Install a security product that supports authorization via certificate.

044C JRNoCertforUser

There is no userid defined for this certificate.

Action: Ensure the userid is known to the SAF service.

044D JRCertInvalid

The certificate is not valid to the security service.

Action: Ensure this is a valid and correct certificate.

044E JRKeepaliveTO

The socket connection was severed.

Action: The KEEPALIVE timer expired and the connection was dropped. Reestablish the socket connection.

044F JRInetRecycled

One of the Transport Providers was activated after the socket was opened.

Action: This socket should be closed and restarted.

0450 JRSwapMismatch

An attempt was made to make the address space swappable when no previous attempt to make the address space non-swappable was made.

Action: Call service to make address space non-swappable before making it swappable.

0451 JRNoBacklogQ

An accept() request was issued for a server socket that does not have a backlog queue.

Action: A listen() was issued with a backlog queue size of less than or equal to zero. Issue a listen() with a backlog queue size greater than zero for the server socket in order to accept() connections.

0452 JRFunctionCode

The function code for syscall is not valid.

Action: Specify a supported function code

0453 JRIdentityType

The identity type for the syscall is not valid.

Action: Specify a supported identity type

0454 JRCertificate

The security certificate was either not specified or the length was not valid.

Action: Specify a valid certificate for __login

0455 JRCwdPLusFileName

The combined length of the CWD specified in the INHE and the filename parameter exceeded 1023 bytes.

Action: Verify the length of the CWD specified in the INHE and length of the filename parameter when combined does not exceed 1023 characters.

0456 JRFileChangedDuringLoad

The file or its attributes changed while the file was in the process of being loaded.

Action: Retry the operation after any changes have been made to the file and its attributes.

0457 JRSecurityEnv

The syscall is prohibited with the caller’s current security environment.

Action: The current task level security environment for the caller was not created via __login. So, __login can not be used to change the current security environment.

0458 JRStorNotAvail

An address was specified which is not available.

Action: The system tried to obtain storage on behalf of the request but the storage was not available. All or part of the storage was already allocated or the system would not permit it to be allocated.

0459 JRNotSegment

A location specified or generated is not on a segment boundary.

Action: Specify the address, length or offset in segment multiples.

045A JRMmapTypeMismatch

A request specified the MAP_MEGA option but was already mapped without the option or did not specify the MAP_MEGA option but was already mapped with that option.

Action: Ensure all requests to map the same file specify compatible map_type options.

045B JRWFileMapRDonly

A request tried to write to a file that is mapped as read-only.

Action: Remap the file for write or read/write access.

045C JRPtTypeNotTried

The entry in a ptrace PT_BlockReq request containing this value in the status field was not processed because of an unexpected error.

Action: Retry the operation after ensuring that the request is valid. For example, ensure that a Write_Block request is not trying to write into protected storage.

045D JRPtBadBlkReqStruc

The PtBRInfo block or related structure passed as input for a ptrace Pt_BlockReq request is not valid.

Action: Fix the PtBRInfo control block or related structure and retry the operation.

045E JRPtSomeBlkedFailed

One or more entries in a Pt_BlockReq request was not processed.

Action: Check the status field of each entry in the PtBRInfo block to obtain the status of each request. At least one did not complete

045F JRPtTypeNotBlockable

The entry in a ptrace PT_BlockReq request containing this value in the status field was not processed because the type specified is not allowed in a blocked request.

Action: Change the PtBRInfo block to not include unsupported request types.

0460 JRTargetPid

A target pid specified is incorrect.

Action: Reissue the request with a valid target pid.

0461 JRSignalPid

A signal pid specified is incorrect.

Action: Reissue the request with a valid signal pid.

0462 JRNoCallerPid

The Signal_Pid or Target_Pid did not contain the pid of the caller.

Action: Reissue the request with the Signal_Pid or Target_Pid equal to the caller's pid

0463 JRAnr

Vnode operation ACCEPT_AND_RECEIVE is not supported by this file system.

Action: Issue separate accept and receive operations with this socket.

0464 JRSrx

Vnode operation SR_CSM is not supported by this file system.

Action: Use regular send/receive type operations with this socket.

0465 JrWrongKey

An error occurred during process signal initialization.

Action: Kernel handling of async I/O can not be done if all callers do not run under the same key.

0466 JRPtBadBlkOffset

A PtBRInfo entry has an offset that either points to within the PtBRInfo block or past the end of the area provided by the user.

Action: Fix the PtBRInfo control block or related structure and retry the operation.

0467 JRSsetTooSmall

The OldCount value supplied was too small to accomodate the number of built entries.

Action: OldCount now contains the number of array elements needed. Reissue the call with the new OldCount value

0468 JRInvalidRange

The NewCount or OldCount was greater than the maximum number of signals allowed.

Action: Check NewCount and OldCount values making sure they are less than the maximum number of signals allowed and reissue the call.

0469 JRInvalidOption

The option specified is not supported.

Action: Reissue the request with a supported option.

046A JRInvalidBinSemUndo

The requested operation violates binary semaphore rules by specifying UNDO option.

Action: Reissue the semaphore request without UNDO parameter for a binary semaphore.

046B JRInvalidBinSemNumSemOps

The requested operation violates binary semaphore rules by specifying more than one operation per semop.

Action: Reissue the semaphore request with one operation per semop call.

046C JRInvalidBinSemNotBinOp

The requested operation violates binary semaphore rules by specifying too large a semop or semctl value for the semval.

Action: Reissue the semaphore request with a valid semop or semctl SETVAL or SETALL value for a binary semaphore.

046D JRInvalidBinSemFlag

A semgt request matched an existing key or ID but the __IPC_BINSEM flag operand does not match.

Action: Reissue the semaphore request either with or without the __IPC_BINSEM flag to match the existing semaphore set.

046E JRInvalidBinSemSetAll

A requested semctl SETALL is being done after a semop for a __IPC_BINSEM semaphore set.

Action: Do the semctl SETALL for a __IPC_BINSEM semaphore set before doing any semop requests to the semaphore set.

046F JRNegativeLength

A negative length was specified for either the header length or trailer length on the SEND_FILE Syscall.

Action: Correct the length and reissue the syscall.

0470 JRInValidOffset

The offset parameter specified on the SEND_FILE syscall is not correct. It is either a negative number or it specifies an offset past the end of the file.

Action: Correct the offset and reissue the syscall.

0471 JRTooManyBytes

The FILE_BYTES parameter specified on the SEND_FILE syscall is larger than the file size.

Action: Correct FILE_BYTES and reissue the syscall.

0472 JRSocketNonBlock

The socket descriptor specified on the SEND_FILE syscall is a non-blocking socket. SEND_FILE requires a blocking socket.

Action: Change the state of the socket from non-blocking to blocking, then reissue the SEND_FILE syscall.

0473 JRLocalSpawnNotAllowed

A request to spawn a local child process could not be completed because of conflicting inheritance attributes. A local spawn request with options that affect the attributes of the address space is not allowed because this would affect the attributes of the current address space where the new process would be created. The spawn request specified an inheritance structure or environment variable settings that would have changed one or more of the following attributes of the address space: the region size, the memory limit, the time limit, accounting information, the user ID.

Action: A local child process is required to be created when either the InheMustBeLocal flag in the inheritance structure is set on or when the value of the _BPX_SHAREAS environment variable is MUST. For spawns that must be local be sure the request does not specify any of the following attributes in the inheritance structure: InheSetRegionSz, InheSetMemLimit, InheSetTimeLimit, InheSetAcctData, InheSetJobname. In addition, be sure that the list of environment variables passed on the spawn request does not include a _BPX_USERID specification.

0474 JRInValidSFPLLen

The SFPL_LENGTH parameter specified on the SEND_FILE syscall is not correct.

Action: Correct SFPL_LENGTH and reissue the syscall.

0475 JRPtInvFPCWrite

The value specified for writing into the Floating Point Control Register is not valid.

Action: Reissue the PT_WRITE_FPR request with a valid value for the Floating Point Control Register.

0476 JRMaxAiocbEcb

The maximum number of AIOCBs with user defined ECBs was exceeded on the requested function.

Action: Reduce the number of AIOCBs with user defined ECBs.

0477 JRCertAlreadyDefined

The certificate being registered/deregistered is already defined for another user.

Action: See initACEE documentation.

0478 JrCertDoesNotMeetReq

The certificate being registered/deregistered does not meet RACF requirements.

Action: See initACEE documentation.

0479 JRLockFcnCode

The value specified for the LockFcnCode parameter for the BPX1SLK service is not valid.

Action: Reissue the BPX1SLK service call with a valid value for the LockFcnCode parameter.

047A JRLockReqType

The value specified for the LockReqType parameter for the BPX1SLK service is not valid.

Action: Reissue the BPX1SLK service call with a valid value for the LockReqType parameter.

047B JRLockType

The value specified for the LockType parameter for the BPX1SLK service is not valid.

Action: Reissue the BPX1SLK service call with a valid value for the LockType parameter.

047C JRLockAddr

The address specified for the LockAddr parameter for the BPX1SLK service is not a valid shared memory address.

Action: Reissue the BPX1SLK service call with a valid shared memory address for the LockAddr parameter.

047D JRLockToken

The value specified for the LockToken parameter for the BPX1SLK service is not valid.

Action: Reissue the BPX1SLK service call with a valid value for the LockToken parameter.

047E JRLockedAlready

The lock represented by the specified lock token is already in a held state.

Action: Reissue the BPX1SLK service call at a later instance when the lock is no longer held.

047F JRLockInUse

The lock represented by the specified lock token is in use for a condition wait.

Action: Reissue the BPX1SLK service call at a later instance when the lock is no longer in use.

0480 JRLockShmAcc

The caller does not have read/write access to the shared memory in which the specified lock resides.

Action: Change the access on the shared memory segment in which the lock resides to read/write access.

0481 JRLockNotOwner

The calling thread does not own the lock represented by the specified lock token.

Action: Change the application such that only the lock owning thread attempts to release the lock.

0482 JRLockMaxCntSys

The maximum number of shared memory locks for the system have been initialized.

Action: Reissue the BPX1SLK service call at a later instance when the number of shared memory locks is no longer at the system maximum.

0483 JRLockMaxCntThd

The maximum number of shared memory locks for the calling thread have been obtained.

Action: Reissue the BPX1SLK service call at a later instance when the number of obtained shared memory locks is no longer at the per thread maximum.

0484 JRLockMaxCntRecurse

The maximum number of recursive lock obtains for a given lock has been reached.

Action: Reissue the BPX1SLK service call at a later instance when the number of recursive shared memory lock obtains is not at the maximum.

0485 JRLockShmRemoved

The specified lock cannot be obtained because it is in shared memory that has been removed.

Action: A shared memory remove was done for the shared memory segment in which the lock resides. Further obtain requests cannot be honored.

0486 JRBadAioEcb

An Ecb represented by AioEcbPtr in one of the input Aiocbs was found to be bad.

Action: Find the offending Aiocb and correct the AioEcbPtr field to either contain zero or point to a valid ecb.

0487 JRNoPtSecEnv

Only a thread level identity created with pthread_security_np (BPX1TLS) can be propagated over a socket.

Action: Insure calling thread has a task level identity created with pthread_security_np() (BPX1TLS) and retry the connect() operation.

0488 JRMultiThreaded

The requested service cannot be performed in an address space with multiple user threads.

Action: The thread calling the service was not the JST (Job Step Task) or the JST has subtasks. Reissue the request from an address space with only a JST task.

0489 JrActAcceptUserid

The active identity for the caller /process was propagated over a socket via accept(). The propagated identity must be cleaned up before another identity can be propagted.

Action: Clean up the propagated identity by closing (BPX1CLO) the socket descirptor that was return by the accept() that caused the identity to be propagated. See setsockopt() (BPX1OPT) for details.

048A JRLockTokenAddr

The address specified in the LockTokenAddr parameter for the BPX1SLK service is not accessible.

Action: Reissue the BPX1SLK service call with an address of a lock token area that is accessible to the calling program.

048B JREnclaveErr

While changing to an identity propagated by a socket an error occurred while attempting to join/leave the propagated enclave.

Action: See your IBM service representative.

048C JRNotInWLMEnclave

The unit of work is not in a WLM enclave. BPX1WLM did not return an enclave token .

Action: The parameter area is unchanged as the current unit of work is not in a WLM enclave.

048D JRCSMfailure

The get_buffer request to get a CSM buffer failed.

Action: Contact your IBM service representative.

048E JrMaxQueuedSigs

Maximum number of queued signal exceeded by the invoking process.

Action: Ask the system programmer or system administrator to increase the MAXQUEUEDSIGS parameter of the BPXPRMxx parmlib member.

048F JrSigInfoLen

The value specified for the SigInfo_Len parameter on a BPX1STW (sigtimedwait) syscall was not valid.

Action: Reissue the BPX1STW (sigtimedwait) syscall with the correct length specified for the siginfo_t (BPXYSINF) area.

0490 JRLevelTooHigh

The load module format of the target executable file is at a level higher than the current system supports.

Action: Rebuild the target executable file so that it is compatible for the running system level.

0491 JRBpxoinitStarted

The OMVS initial process must be started by the system. Do not use the START operator command to start the OMVS initial process.

Action: Do not use the START operator command to start the OMVS initial process. It is started by the system.

0492 JRBpxoinitNotUid0

The userid associated with system procedure, BPXOINIT, must have uid=0 in the OMVS segment in the security database.

Action: Change the userid or the uid of the userid associated with system proc BPXOINIT to have uid=0 and then have the operator re-IPL to recover OMVS services.

0493 JRStickyBit

A program with the sticky bit was found but it is not supported on this call.

Action: When issued for a BPX1LOD, either do not specifiy a sticky program, or reset the option on the BPX1LOD call to allow sticky programs.

0494 JrMaxAsyncIO

The maximum number of outstanding async I/O requests has been exceeded by the invoking process.

Action: Ask the system programmer to increase the MAXQUEUEDSIGS or MAXFILEPROC parameters for the process. The Async I/O maximum is two times the sum of MAXQUEUEDSIGS, from the BPXPRMxx parmlib member, and the process's file limit, which comes from: the BPXPRMxx MAXFILEPROC value, or the user's RACF profile's OMVS segment FILEPROCMAX value, or a program specified RLIMIT_NOFILE value.

0495 JRNotPtCreated

Invoking task is not pthread created.

Action: The function must be run as a pthread-created thread. Reissue the function after correcting the error.

0496 JRNotPtSecurity

The current task security environment is not set up via pthread_security_np.

Action: The current task security environment must be set up via pthread_security_np. Reissue the function after correcting the error.

0497 JRAlreadyActive

Requested function is already active.

Action: The osenv_get/osenv_set request cannot be processed. A previous osenv_get/osenv_set is active. An osenv_unset must be issued before a new osenv_get/osenv_set can be issued again.

0498 JRSecActive

Task level security environment already active.

Action: One of the following error conditions occur:
  • The osenv_set request cannot be processed. The osenv_set request specified security environment and the current task already has task level security active.
  • The pthread_security_np request cannot be processed. An osenv environment is already active with task level security specified.
0499 JRInvOsenvTok

Input osenv token is incorrect.

Action: The input osenv token is invalid. Specify the same osenv token as returned on a osenv_get call. You may need to issue osenv_persist to ensure the osenv token stays valid.

049A JRNoPersist

Unpersist requested but persist count is 0.

Action: The osenv_unpersist request cannot be processed. Either no osenv_persist was issued or all prior osenv_persist requests have been matched by a corresponding osenv_unpersist.

049B JROsenvWlmMismatch

osenv WLM Enclave membership does not match the current pthread WLM Enclave membership.

Action: The Osenv_set function cannot be processed. One of the following conditions occur:
  1. The osenv_WLM attribute is requested, but the task already has a WLM Enclave membership established which is different than the osenv WLM Enclave membership.
  2. The osenv_WLM attribute is not requested, but the task already has a WLM Enclave membership established.
049C JROsenvWrongEnclave

Current task is not associated with the osenv WLM enclave.

Action: The Osenv_unset function cannot be processed. The task has changed WLM Enclave membership since the time osenv_set joined the WLM Enclave associated with the osenv.

049D JROsenvBeginEnvOutstanding

Current task is operating under an outstanding WLM Begin environment. Enclave leave is not allowed.

Action: The Osenv_unset function cannot be processed. The current task is operating under an outstanding Begin environment. Osenv_unset must be issued before issuing IWMSTBGN.

049E JROsenvNotEjoinedTcb

Current task did not issue WLM Enclave Join, but only inherited Enclave attribute from mother task.

Action: The Osenv_unset function cannot be processed. The current task cannot isue osenv_set/osenv_unset in this environemnt.

049F JROsenvEnclaveSubTaskExists

Current task has residual subtasks propagated to the enclave which are still associated with the Enclave.

Action: The Osenv_unset function cannot be processed. Ensure the subtasks are ended before issuing the osenv_unset function.

04A0 JROsenvSecurityMismatch

Current security environment does not match the value specified in the osenv token.

Action: The Osenv_unset function cannot be processed. The security environment cannot be changed between osenv_set and osenv_unset. Ensure that the osenv token used was the one returned on the osenv_get.

04A1 JROsenvNotActive

Osenv environment is not active.

Action: The osenv_unset, osenv_persist, or osenv_unpersist functions cannot be processed. Osenv_get or osenv_set must be issued before the osenv_unset, osenv_persist or osenv_unpersist functions. Osenv_unpersist can be issued together with osenv_set. If issued alone, it must be issued before osenv_unset.

04A2 JROsenvPersistCntBad

There are no outstanding persist requests.

Action: The Osenv_unpersist function cannot be processed. The current persist count is 0. Osenv_persist must be issued before the osenv_unpersist function.

04A3 JRWlmJoinError

Bad return code from IWMEJOIN macro.

Action: The IWMEJOIN macro failed. Check for WLM reported errors. Retry the osenv system call.

04A4 JRIwmeleavError

Bad return code from IWMELEAV macro.

Action: The IWMELEAV macro failed. Check for WLM reported errors. Retry the osenv system call.

04A5 JrNotSupInSysplex

In sysplex, for remount to be supported, all systems must be at a release that provides remount support. In sysplex, unmount drain is tried as unmount normal, but if it cannot complete, an error is returned.

Action: Remount can be replaced with unmount followed by mount. Unmount drain can be replaced by looping on unmount normal until it successfully completes.

04A6 JrSysplexRecoveryInProg

An unmount or some file system command was attempted while sysplex system recovery was in progress.

Action: Try again later.

04A7 JrMustBeImmed

An unmount was attempted in a sysplex for a filesystem that is unowned, and Immed was not specified.

Action: Do an unmount immed.

04A8 JrResetAlreadyInProg

Unmount reset is already in progress.

Action: None

04A9 JrInvalidSize

Buffer received by mount was too small.

Action: Reissue the command with a correct size buffer.

04AA JrUnknownBlock

Control block received is unrecognized.

Action: The data structure in the buffer did not have an eye catcher identifier. Place this into the structure and try the command again.

04AB JrBadCombo

Conflicting values have been received.

Action: Values for the chmount request conflict. Adjust the data structure to remove the conflicts. Reissue the request.

04AC JrNoWildFromSys

Conflicting values have been received.

Action: The FROMSYS specification in the MNTE cannot be an asterisk. Reissue the request for a specific FROMSYS.

04AD JrNoValues

No values for the chmount request have been given.

Action: Insufficient data was available in the MNTE to construct a chmount request.

04AE JrMustBeSysplex

This request only possible in a sysplex enivornment.

Action: This request can only be accepted in a sysplex environment. The issueing environment was not sysplex. There is no further action.

04AF JrAttemptsExhausted

Every attempt to move the filesystem has failed.

Action: Every attempt to move this file system has ended in failure. All possible locations to move the file system has been tried. It cannot be moved.

04B0 JrLostState

The filesystem can no longer be moved by this process.

Action: The filesystem can no longer be moved because the CDS no longer indicates that this process can move it.

04B1 JrNoFROMSYS

The system specified as the FROMSYS can not be found.

Action: Reissue the command with a new FROMSYS specified.

04B2 JrNoFSFound

The filesystem requested to be moved can not be found.

Action: Reissue the command with a filesystem that can be found.

04B3 JrInRecovery

A required file system is being recovered.

Action: Retry the operation later.

04B4 JrNoMountPointFound

The mountpoint requested to be moved can not be found.

Action: Reissue the command with a mountpoint that can be found.

04B5 JrBlackHole

Filesystem is unowned.

Action: A filesystem that is unowned can not be moved.

04B6 JrNoPlace

This filesystem can not be placed.

Action: A filesystem was requested to be moved to and it is not possible to do so. The reason can be that the filesystem was requested to be moved to the system it was already on. This is considered an error. Alternatively, the reason can be that the filesystem was requested to be moved to any other system in the sysplex and no eligible system was found to accept this filesystem.

04B7 JrNoSystemFound

There is no system with that name.

Action: Reissue the command with a system name that can be found.

04B8 JrSysplexDataSyncLost

The I/O request is rejected because the file integrity was lost due to the failure of the file system server.

Action: Close the file and re-open it.

04B9 JrTdGone

The socket Transport Driver has terminated and restarted.

Action: Close the socket and re-open it, or restart the application program.

04BA JrNoDeviceFound

There is no longer any device with that device number.

Action: Reissue the command.

04BC JrNotMoveable

This filesystem can not be moved.

Action: Some filesystems can not be moved from one system to another. Check that the filesystem you intended to move is the one that was requested.

04BD JrNoLongerServer

The server detected it is no longer the server.

Action: The server has determined that it is no longer the server for the filesystem to be moved. Reissue the command.

04BE JRLockCtl

The lockctl service vnode operation is not supported.

Action: Verify that the operation was performed on a physical file system that supports the operation.

04BF JRCPLNotAuth

__cpl service call failed permission check for BPX.CF facility class profile.

Action: Caller must be given read permission to BPX.CF facility class profile in order to use the __cpl service successfully.

04C0 JRCPLInvFcnCode

__cpl service call failed because the supplied function code is not valid.

Action: Reissue the __cpl service call with a valid value for the Function Code parameter.

04C1 JRCPLInvBuffLen

__cpl service call failed because the supplied buffer length is not valid.

Action: Reissue the __cpl service call with a valid value for the buffer length parameter.

04C2 JRCPLBuffTooSmall

__cpl service call failed because the supplied buffer was too small for the data to be returned.

Action: Reissue the __cpl service call with a buffer large enough to hold the data returned from IXCQUERY or IXLCSP.

04C3 JrSysplexBlackHoleIO

The I/O request is rejected because access to the owning file system was lost. This is a temporary condition.

Action: Close the file and re-open it.

04C4 JrSysplexRecoveryTO

Filesystem recovery timeout. One or multiple file systems may not have been recovered, and are thus black holes.

Action: See your IBM service representative.

04C5 JRCPLInvStrucType

__cpl service call failed because one of the supplied structure entries is defined with an incorrect type.

Action: Reissue the __cpl service call with a valid type for all supplied structure entries.

04C6 JRCPLCFNotFound

__cpl service call failed because a Coupling Facility at the appropriate level (level 8 or greater) could not be found in the sysplex where this __cpl callable service routine is running.

Action: Reissue the __cpl service call in a sysplex that has a Coupling Facility at the appropriate level.

04C7 JRShrLibNotAuthorized

The chattr function can not be performed to change the shared library attribute because the caller is not permitted to the BPX.FILEATTR.SHARELIB facility class.

Action: If the user is allowed to use chattr to change the shared library attribute, the user must be permitted to the BPX.FILEATTR.SHARELIB facility class.

04C8 JROutOfAutomountEntries

The system is unable to obtain an entry in the file system automount table in the OMVS couple data set.

Action: Either reduce the number of automount rules, or create a new OMVS couple data set which supports a larger number of rules. The system programmer will need to run the XCF couple data set format utility for TYPE(BPXMCDS) to increase the number of AMTRULES supported then issue the SETXCF COUPLE operator command to add the new OMVS couple data set as the alternate and then PSWITCH to make the alternate couple data set the primary couple data set for OMVS.

04C9 JRNeedAbsPath

An absolute path name must be used when performing a mount command from a userid that has changed roots.

Action: Reissue the command from an environment where the user has not changed root or specify a full path name on the invocation of the syscall.

04CA JrMapBadFunction

The __Map function or sub-function code was not valid.

Action: Specify a valid function code.

04CB JRNotAuthMAP

__map_init call failed permission check for BPX.MAP facility class profile.

Action: Caller must be given read permission to BPX.MAP facility class profile in order to use the __map service successfully.

04CC JRBadBlkAddr

__map service was passed a bad block address. The block address specified was not within the map area, or was not on a block boundary.

Action: Ensure that block address are valid.

04CD JRMapAlreadyActive

__map_init requested for a process that already had an __map environment active.

Action: Determine why the application attempted to initialize an __map environment when one was already active and correct it.

04CE JRMapOutOfBlocks

__map service, processing for a new block or connect request, was asked to select a map block that was not currently in use, but none was available as all blocks were currently in use.

Action: Increase the number of blocks in the map area or disconnect from at least one map block.

04CF JRMapNotActive

__map service was requested but either no map environment is active or the current map environment is being shut down.

Action: You must either start a map environment or wait for the current map environment to complete shut down and then start a new map environment prior to issing more requests.

04D0 JRMapTokenNotFound

__map service data block token not defined.

Action: That token is not defined because either it is not valid or it was valid at one time but has been previously freed.

04D1 JRMapBlockNotInUse

__map service disconnect is issued for a map block that is not currently in use.

Action: This may be caused by an application disconnecting from a block that is not currently connected, or disconnecting from the same block more than once.

04D2 JRMapBlockInUse

__map service new block or connect specified a map block that is currently in use.

Action: Ensure a map block is disconnected before the map block is re-used.

04D3 JRMapBlockFreePending

__map service connect request specified a data block that is currently being freed.

Action: Do not free a block before all users have finished with it.

04D4 JRMapBadStorage

The parameter list either could not be accessed or was in read only storage and could not be updated.

Action: The application provided a parameter list that is not useable do to storage key problems. The application should ensure that a valid storage address and valid storage are provided to the __map service.

04D5 JRMapUnexpectedErr

An error occurred in an __map service.

Action: See your IBM service representative.

04D6 JRReservedValueInvalid

A reserved field contained a value other than zero.

Action: Clear the parameter list prior to filling it in to call the service or insure you are not setting fields incorrectly.

04D7 JRMapArrayCountErr

The array count was outside the valid values.

Action: Reduce the number of array entries in the parameter list to the __map_service function.

04D8 JrNotClient

This system is not a client of the requested filesystem.

Action: This osi_xmsg request must come from a client.

04D9 JrJointMsgSent

The joint LFS/PFS message requested for osi_xmsg to send has already been sent.

Action: A joint message can only be sent once.

04DA JRNoWildAutoMove

The automove setting can not be changed while moving a collection of filesystems.

Action: Reissue the move of the collection of filesystems without the automove specification.

04DB JRInvalidFSP

The file does not have a valid FSP.

Action: Until a valid FSP is reestablished, actions requiring authorization cannot be performed on this system.

04DC JrNoRoot

The user home directory did not exist or there is no system root mounted.

Action: If there is no system root the DISPLAY OMVS,MF console command can be used to show mount failures that have occurred. Correct any problems and mount a file system on /. Otherwise, insure that the HOME() directory specified in the OMVS segment of the user profile exists. Note: z/OS UNIX can be used without a HOME directory but all file system references must be made with absolute path names until a successful change directory, cd command or chdir() function, is performed.

04DD JRMoveInProgress

The filesystem is in the process of being moved to a different server.

Action: Try again later.

04DE JRBadBodyLength

The MNTE2 does not have a correct body length coded into the body length field in the MNTE header.

Action: Recode the BodyLength field to have the length of the MNTE body control block structure that is being used.

04DF JRXcfNoStorage

I/O buffer shortage for writing data through XCF.

Action: The maximum number of I/O buffers for writing message data through XCF has been exceeded. Ask the system programmer or system administrator to sufficiently increase the MAXMSG parameter of the COUPLExx parmlib member. If the error persists, contact your IBM service representative.

04E0 JrPFSFailed

A PFS returned a RetVal of -1 with an errno and errnojr of zero.

Action: The operation has failed. If this was an unmount, do an unmount force.

04E1 JRPtInvGPRHNumber

The ptrace call has an incorrect general register number.

Action: A debugger program tried to read or write a general purpose high register, but supplied an incorrect register number. Ensure that a valid register number is supplied on the ptrace request. The register numbers are defined in the BPXYPTRC macro.

04E2 JRFiletooLarge

File size exceeded the value that can be held in object of type off_t.

Action: Rework the program to use a larger data type.

04E3 JRCantExpClient

V_export of a sysplex client file system is not allowed.

Action: Export the file system from the sysplex system that owns it.

04E4 JRIsExported

Moving a file system that is exported is not allowed. Remounting an exported filesystem to a mode where it would then be exported on a served client is not allowed.

Action: Unexport the file system first and then move or remount it.

04E5 JrFsQuiescedMt

A file system operation was rejected because the owning file system is quiesced and the operation cannot be delayed.

Action: Retry the operation after the file system is unquiesced.

04E6 JrMptFsQuiesced

A mount request was rejected because a file system in the mount path is quiesced.

Action: Retry the mount operation after all file systems in the mount path are unquiesced.

04E7 JrMmapSuspended

A memory map request was rejected because the memory map function is suspended.

Action: An unrecoverable error caused the memory map function to be suspended until the next IPL. Retry the memory map request after the IPL.

04E8 JrSfsDiagAct

A Shared-FS diagnostic operation is already in progress.

Action: Retry the operation after the current Shared-FS diagnostic function completes.

04E9 JRInvalidFileTag

The file tag supplied is invalid.

Action: When the file text flag is on, the Coded Character Set Id should not be 0 or hex FFFF.

04EA JrDOMParms

The CCADOMToken and CCAMsgIdList are mutually exclusive, both were specified.

Action: Retry the operation with either CCADOMToken or CCAMsgIdList, not both.

04EB JrTooManyMsgIDs

The maximum number of messages that can be deleted in one operation is 60, more then 60 were specified.

Action: Retry the operation with with 60 or less messages specified in the list pointed to by CCAMsgIdList.

04EC JrAuthRoutingCode

An unauthorized caller (not UID=0) specified a message routing code reserved for authorized caller.

Action: Retry the operation with routing codes 1-28.

04ED JrRoutCode

An invalid message routing code was specified.

Action: Correct the problem and retry the operation. Valid message routing codes are 1-28 for unauthorizeded and 1-128 for authorized caller's.

04EE JrDescCode

An invalid message descriptor code was specified.

Action: Correct the problem and retry the operation. Valid message descriptor codes are 1-13.

04EF JrRoutingList

All or part of the list of routing codes pointed to by CCARoutCdeList is not addressable by the caller.

Action: Correct the addressability problem with the list of message routing codes and retry the operation.

04F0 JrDescList

All or part of the list of descriptor codes pointed to by CCADescList is not addressable by the caller.

Action: Correct the addressability problem with the list of message descriptor codes and retry the operation.

04F1 JrMsgIdList

All or part of the list of message ids to be deleted pointed to by CCAMsgIdList is not addressable by the caller.

Action: Correct the addressability problem with the list of message ids and retry the operation.

04F2 JrTooManyRoutCodes

The maximum number of routing codes that can be specified is 128 but was exceeded.

Action: Retry the operation with 128 or less routing codes specified in the list pointed to by CCARoutCdeList.

04F3 JrTooManyDescCodes

The maximum number of descriptor codes that can be specified is 6 but was exceeded.

Action: Retry the operation with 6 or less descriptor codes specified in the list pointed to by CCADescList.

04F4 JrMsgId

All or part of the location specified by the caller for the returned message id (CCAMsgIDPtr) is not addressable by the caller.

Action: Correct the addressability problem with the location for the message id and retry the operation.

04F5 JrSysplexEnq

The ENQ for file system sysplex serialization is already held by another local task or by another system in the sysplex.

Action: See your IBM service representative.

04F6 JrLfsProtocolLev

The function could not be performed because the minimum required LFS protocol level was not met by all systems in the sysplex group.

Action: See your IBM service representative.

04F7 JrMemberListBad

An inconsistency between the XCF representation of the BPXGRP member group and the local representation exists.

Action: This system should be restarted. Contact your IBM service representative.

04F8 JRRcvBufTooSmall

A message will not fit in the receive buffer. The size of the receive buffer for the receiving socket, which was set by the setsockopt syscall with the so_rcvbuf option, is too small to contain the data being sent to it. Truncation would occur.

Action: The sending application must reduce the size of the message being sent to the receiving socket or the receiving application must use the setsockopt syscall with the so_rcvbuf option to increase the size of the receive buffer for the receiving socket.

04F9 JRMutualExclInProgress

Mutually-exclusive operations are currently in progress in the sysplex. The request cannot proceed.

Action: MODIFY BPXOINIT,FILESYS=DISPLAY can be used to display status of systems in the sysplex.

04FA JRUnmountAllInProg

MODIFY FILESYS=UNMOUNTALL is in progress. MOUNT cannot proceed.

Action: Retry the MOUNT later.

04FB JrQuiesceInProg

A pthread quiesce operation is already in progress.

Action: The pthread_quiesce_and_get_np function cannot be performed at this time due to conflicts with other quiesce operations currently in progress. Retry the operation after the current operation completes.

04FC JrRequestTypeErr

The request type contains an incorrect value.

Action: The request type contains an unsupported value. Correct the error and retry the operation

04FD JrNoFreezeExit

The pthread_quiesce_and_get_np service (BPX1PQG) cannot be performed because the Quick_freeze_exit has not been registered.

Action: Use the oe_env_np (BPX1ENV) service, function code of QUICK_FREEZE_EXIT_REG to register a user exit, before issuing the pthread_quiesce_and_get_np service.

04FE JrNotExitKey

The PSW key of the caller is not same as key registered under Quick_freeze_exit.

Action: The caller must run in same PSW key as registered under the QUICK_FREEZE_EXIT_REG function of the BPX1ENV service. Verify that the Quick_Freeze_Exit was registered with the proper PSW key.

04FF JRInvThdq

Incorrect quick pthread quiesce data structure.

Action: The input data structure (mapped by BPXYTHDQ) specified on the pthread_quiesce_and_get_np service contained one or more errors:
  • address of the BPXYTHDQ data structure is incorrect
  • incorrect eye-catcher
  • number of threads specified = 0
  • size of data structure is smaller than the number of specified threads
  • data structure not on word boundary
Correct the program and rerun.
0500 JRNotFrozen

A pthread_quiesce_and_get_np (BPX1PQG) unfreeze_all request cannot complete because the process is not frozen.

Action: Use the pthread_quiesce_and_get_np service to freeze the threads before using the pthread_quiesce_and_get_np service with a request type of THDQ_UNFREEZE_ALL.

0501 JRQFrzExitError

A pthread_quiesce_and_get_np (BPX1PQG) service call failed because the language environment quick freeze exit abnormally ended.

Action: Contact your IBM service representative.

0502 JRExitAlreadyReg

The quick freeze exit has already been registered.

Action: The QUICK_FREEZE_EXIT_REG function of the oe_env_np (BPX1ENV) service cannot be performed because an exit different than the requested has already been registered.

0503 JRCannotDeregister

The quick freeze exit cannot be deregistered.

Action: The request to deregister the quick freeze exit for pthread_quiesce_and_get_np using the oe_env_np (BPX1ENV) service cannot be performed. The exit cannot be deregistered (by specifying a zero exit address).

0504 JRRequestorThread

The requestor thread cannot be frozen.

Action: A pthread_quiesce_and_get_np (BPX1PQG) service call failed because the requesting thread is on the list of threads to be frozen. The requesting thread cannot be frozen.

0505 JRThdsNotSafe

Specified threads cannot be frozen in a safe state.

Action: A pthread_quiesce_and_get_np (BPX1PQG) service call failed because one or more of the listed threads cannot be frozen in a safe state. Try the request again.

0506 JRDupThreads

Duplicate threads specified in data structure.

Action: A pthread_quiesce_and_get_np (BPX1PQG) service call failed because one or more of the listed threads have duplicate entries in the input data structure. Correct the program and rerun.

0507 JrSysEntryBad

An inconsistency between the XCF representation and the file system representation of a member in the BPXGRP group exists.

Action: The analysis and repair of the file system hierarchy ends prematurely. Partition cleanup is initiated for the named system. Issue the MODIFY BPXOINIT,FILESYS=DISPLAY,GLOBAL system command to determine if partition cleanup processing is complete. Partition cleanup is complete when there are no systems performing LOCAL FILE SYSTEM RECOVERY or FILE SYSTEM TAKEOVER RECOVERY. When partition cleanup has completed, re-issue the MODIFY BPXOINIT,FILESYS=FIX command to resume and complete file system diagnostic and repair processing. If the inconsistency persists for the named system, a sysplex restart may be required.

0508 JRFileNotEmpty

The file is not empty.

Action: The file must be empty for this particular combination of syscall parmaters. For example, opening an existing file and specifying deferred file tagging is not allowed.

0509 JRNoDelRequested

The directory does not allow unlinks.

Action: The directory on which the file resides has had a chattr request specifying that files within the directory are not to be deleted issued against it.

050A JrConversionErr

Unicode/390 conversion error.

Action: The read or write operation failed when converting between different CCSIDs.

050B JrUnconvertibleChar

Character is not convertible.

Action: A read or write operation failed while converting between CCSIDs. Either an invalid character was encountered, or the character was incomplete for the given CCSID.

050C JrInvalidCcsid

CCSID not supported.

Action: A CCSID specified is not supported. If a read or write operation was active, then the Unicode/390 environment was not set up to allow conversion between the program's CCSID and the file's CCSID.

050D JrConversionEnv

Unicode/390 environmental error.

Action: Unicode/390 services were required for the operation, and either the service failed or was not set up. Determine if Unicode/390 initialized properly, and check for a Unicode/390 error message or dump.

050E JrUnknownConversion

Unicode/390 environmental error.

Action: Unicode/390 services were required for the operation, and a previous lseek operation changed the position from which to read a multi-byte character file. This read operation is invalid because the character state is now unknown.

050F JrNoTaskACEE

Invoker must have task level ACEE.

Action: Invoke pthread_security_np(TLS_TASK_ACEE#) only when invoker has a task level ACEE

0510 JrNotWLMACEE

ACEE must be WLM created.

Action: Invoke pthread_security_np(TLS_TASK_ACEE#) only when the ACEE is WLM created

0511 JrTLSDONEONIPT

IPT already invoked TLS_TASK_ACEE#.

Action: Invoke pthread_security_np(TLS_TASK_ACEE#) only when IPT has not invoked TLS_TASK_ACEE#

0512 JRInvEcbPtr

The ECB pointer is not a 31-bit address.

Action: The ECB must reside below the 2G bar. If a 64-bit pointer is passed, the upper word must be zeroes. Retry the request specifying a valid ECB pointer.

0513 JRAmode64

Invalid addressing mode.

Action: This release does not support AMODE(64).

0514 JRExecExitAboveBar

Exec user exit is above the bar.

Action: The EXEC user exits can not reside above the BAR. Retry the request with the user exit loaded below the BAR.

0515 JRInvalidMedWtAmode

Medium weight process can not change AMODE.

Action: Since LE can not handle dynamic AMODE changes, requests for an AMODE change on a medium weight process will not be allowed.

0516 JrNeedMountLatch

BPXXCDSS service invoker must hold mount latch.

Action: See your IBM service representative.

0517 JrBadLfsVersion

LFS Version incompatibility exists.

Action: See your IBM service representative.

0518 JRAlreadyInShutDown

The block or permanent process cannot be registered.

Action: The request to register a blocking process or job, or a request to register a permanent process or job, using the oe_env_np (BPX1ENV) service cannot be performed. A shutdown is currently in progress.

0519 JRBlockPermAlreadyRegistered

The process or job is already registered.

Action: The request to register a blocking process or job, or a request to register a permanent process or job, using the oe_env_np (BPX1ENV) service cannot be performed. The job or the current process is already registered.

051A JRBlockPermNotRegistered

The process or job is not registered.

Action: The request to deregister a blocking process or job, or a request to deregister a permanent process or job, using the oe_env_np (BPX1ENV) service cannot be performed. The job or the current process is not registered.

051B JRJobNameNotValid

The Job Name was not found.

Action: This reason code is returned for one of the following reasons:
  • The request to register a blocking process or job, or a request to register a permanent process or job, cannot be performed because the JOB name does not exist.
  • A z/OS Communications Server Real-time application-controlled TCP/IP trace NMI request could not find the TCP/IP stack specified by or associated with a trace instance.
    • For an RCCOpen request, verify that the TCP/IP stack name specified in input field RCOPStack is correct.
    • For all other requests, verify that the token in field RCHRToken in the input RCCHeader is correct.
051C JRJSTMustBeRegistered

The Job Step Process must be registered.

Action: The callable service is rejected, because the job step process must be registered prior to registering a lower process or the job step process can not be re-registered while a lower process is still registered.

051D JRNotAuthShutdown

SHUTDOWN_REG call failed permission check for BPX.SHUTDOWN facility class profile.

Action: Caller must be given read permission to BPX.SHUTDOWN facility class profile in order to use the new registration function service successfully.

051E JRUnsupportedEnv

Caller attempted to call a USS Service in an unsupported environment.

Action: Caller cannot call USS services in this environment. An example of an unsupported environment is a PFS Task running inside the OMVS address space. The function must be performed from an environment that is supported.

051F JrPidInvalid

Pid specified for _BPXK_PIDXFER is invalid.

Action: The PID specified with the _BPXK_PIDXFER environment variable was determined to be invalid. A PID is considered invalid if it contains a non-decimal EBCDIC character (0-9) or is longer then the maximum allowable PID (>10 characters).

0520 JrPidOutOfRange

Pid specified for _BPXK_PIDXFER is out of range.

Action: The PID specified with the _BPXK_PIDXFER environment variable is out of the allowable range. A PID for a PIDXFER type exec must be between 2 and 4294967294 (inclusive).

0521 JRXferPidNotFound

Pid specified for _BPXK_PIDXFER could not be found.

Action: The PID specified with the _BPXK_PIDXFER environment could not be found. Ensure the target PID for a PIDXFER type exec is still active.

0522 JRNoPidXfer

The caller is not authorized to debug the target process specified by the _BPXK_PIDXFER environment variable.

Action: Determine the authorization required to debug a process and retry the request. For details on the authorization required refer to the IRRSPT00 SAF callable service.

0523 JRPidXferNoExtLink

External Links are not allowed with PidXfer.

Action: The program specified in the _BPXK_PIDXFER environment is not supported because it is an external link.

0524 JRPidXferSameAS

Pid specified for _BPXK_PIDXFER is available.

Action: The PID specified with the _BPXK_PIDXFER environment is active in the current address space.

0525 JRPidXferAsyncFail

An asynchronous request for this Pid failed.

Action: The PID specified with the _BPXK_PIDXFER environment is terminating.

0526 JRNoPidXferDefUids

Cannot PIDXFER when both PIDs have default userid.

Action: The PID calling BPX1EXC and the target PID specified by _BPXK_PIDXFER are using the default user identity, PIDXFER is not permitted in that environment

0527 JrRestartedFd

The file descriptor is left over after OMVS Restart.

Action: The callable service is rejected because the descriptor was opened in a prior instance of OMVS. Close the descriptor and reopen the file or socket.

0529 JRInvBuffSize

The length of the buffer is not valid.

Action: The total buffer length specified for this request is too big. Retry the request specifying a valid buffer length. If this is a socket receive request, and MSG_PEEK and MSG_WAITALL are specified, the buffer size cannot exceed 65&finespace;535.

052A JRInvSendBuffSize

The send buffer size is not valid.

Action: The total buffer length specified for the send request exceeds the limit for a datagram socket. Retry the request specifying a valid buffer length.

0528 JRPXNoMpMu

Cannot PIDXFER to multi-process/multi-user address space.

Action: The target PID for a PIDXFER resides in an address space that has multiple processes and multiple user identities, PIDXFER is not permitted in that environment

052B JROnePXOnly

Only one PIDXFER process allowed per address space.

Action: The target PID for a PIDXFER resides in an address space that was already the target of a PIDXFER, only one PIDXFER process is permitted in an address space.

052C JRPXExecFileTooBig

The size of the specified file exceeds the private region of the PidXfer target address space.

Action: The exec service detected that the size of the executable to be run exceeds the size of the PIDXFER target's address space private region.

052D JRPXNoSpace

Not enough virtual storage available in the target PIDXFER address space.

Action: During exec PIDXFER processing it was determined that the target address space did not contain enough private virtual storage to support another processs. PIDXFER requires at least 512K of private storage available below the line and 64M of private storage available above the line.

052E JRInheMemLimit

MemLimit size specified in Inheritance structure is not valid.

Action: Re-issue Spawn with a valid MemLimit Size in the Inheritance Structure.

052F JR64BitNotSupp

Transport does not support 64-bit addresses.

Action: See your IBM service representative.

0531 JRCinetNotAttached

The Cinet is configured and this name does match a stack but that stack is not attached to this socket.

Action: Check the permitted values specified for the stack. Display OMVS,PFS in the console to list all the stacks currently configured.

0532 JRNoCinet

Name does not match, but Common Inet is not configured, or this is not a socket, so this error may not matter to the application.

Action: The Ioctl could be sent directly to the only stack.

0533 JRCinetBadName

The Cinet is configured and this name does not match any stack.

Action: Check the permitted values specified for the stack. Display OMVS,PFS in the console to list all the stacks currently configured.

0534 JRFilesLocked

Command not allowed because one or more applications have byte range locks on files in the filesystem.

Action: The filesystem command (such as SETOMVS FILESYS) will be prevented until all locking applications have closed those files in the filesystem for which they issued byte range lock commands.

0535 JRNoIPv6Stacks

There are no TCPIP stacks currently supporting IPv6.

Action: For the socket() function there must be at least one IPv6 Stack active on the system. For other functions there must be at least one IPv6 stack attached to the socket. Check the permitted values specified for the stack. Display OMVS,PFS in the console to list all the stacks currently configured. If IPv6 has recently been configured via SETOMVS you may need to recycle the TCPIP stack(s).

0536 JRMedProcTerm

Call to BPX1MPC for this medium weight process failed because the process is already in termination.

Action: See your IBM service representative.

0537 JrNoListAuthPgmPath

There is no authorized program path list entry.

Action: The authorized program path used in this call was not listed in the sanction list referred to by AUTHPGMLIST. Update the sanction list.

0538 JrNoListPgmCntlPath

There is no program control path list entry.

Action: The program control path used in this call was not listed in the sanction list referred to by AUTHPGMLIST. Update the sanction list.

0539 JrNoAPFPgmName

There is no APF Program name entry.

Action: The APF program name used in this call was not listed in the sanction list referred to by AUTHPGMLIST. Update the sanction list.

053A JrAfNotRightForSocket

The address family specified in the sockaddr does not match the address family of the socket.

Action: Correct the program to build a sockaddr structure that is appropriate for the address family of the socket being used.

053B JrTdOptGone

The stack chosen by the IPv6 option or by the IPv4 option is not active on this socket.

Action: The function choose a stack with the IPV6_PKTINFO ancillary data item, IP_PKTINFO ancillary data item, sockaddr scope id, or socket options of IPV6_PKTINFO or IPV6_MULTICAST_IF and that stack is not attached to this socket. The stack may have been recycled since setsockopt() was called or the interface index used may be wrong.

053C JrV6OnlyOnOnly

The IPV6_V6ONLY socket option may only be turned ON.

Action: Once setsockopt(IPV6_V6ONLY) is turned on it may not be reversed in this implementation.

053D JrBadArgValue

The argument value passed to the function is not within the range allowed.

Action: Check the allowed values and correct the call.

053E JrPreProcInitExitReject

A Pre-Process Initiation exit rejected the process initiation.

Action: Check all Pre-Process Initiation exits why this process was rejected.

053F JrPreProcInitExitAbend

A Pre-Process Initiation exit Abended.

Action: Check all Pre-Process Initiation exits to find out why the exit Abended.

0540 JrPosProcInitExitAbend

A Pos-Process Initiation exit Abended. was in error.

Action: Check all Pos-Process Initiation exits to find out why the exit Abended.

0541 JrPreProcInitExitERROR

A Pre-Process Initiation exit CSVDYNEX call was in error.

Action: See your IBM service representative.

0542 JrPosProcInitExitERROR

A Pos-Process Initiation exit CSVDYNEX call was in error.

Action: See your IBM service representative.

0543 JrInvalidSyslist

The system list is not valid.

Action: Verify that the number of items in the syslist is correct according to the length provided. The minimum number of entries is 1 and the maximum is 32 system names. If a wildcard was entered, it must be the last item in an include system list.

0544 JrMountRedirected

The mount request has been redirected to another system.

Action: The file system is not accessible from this system at this time, however the mount was redirected to another system and should be mounted on this system shortly. Wait for a short duration and then check to determine if the file system is locally mounted.

0545 JRInvIoctlArg

The argument value used in the ioctl is not valid for the command.

Action: Check the permitted values for the ioctl command.

0546 JRInvIoctlArgLen

The length of the argument used with the ioctl command is not valid for the command.

Action: Check the permitted values for the ioctl command.

0547 JrDefUidNotAllowed

The function is failed because it is not allowed from a user using the default OMVS segment.

Action: Do not use the service.

0548 JrZeroScopeTdx

The Scope_Id has a zero Cinet Transport Driver Index.

Action: With IPv6 sockets in a Common Inet configuration whenever a non-zero Scope_Id is specified in a sockaddr the Cinet Td Index, in the Scope_Id's upper half word, must also be specified. Correct the program.

0549 JrZeroIfTdx

An Interface Index has a zero Cinet Transport Index.

Action: With IPv6 sockets or IPv4 sockets in a Common Inet configuration whenever a non-zero Interface Index is specified on a socket option or sendmsg ancillary data item the Cinet Td Index, in the Interface's upper half word, must also be specified. Correct the program.

054A JrTdxMisMatch

Scope_Id and Interface Index do not agree.

Action: On an IPv6 socket in a Common Inet configuration sendmsg() was issued with both a Scope_Id and an Interface Index specified but they each specify a different Cinet Transport Driver in their upper half words. Correct the program to use one or the other.

054B JrShutDownInProgress

Kernel Shutdown is in progress on this system.

Action: File systems can not be moved to a system that is being shutdown. Select a different system in the sysplex where the file system can be moved to and re-issue the move command.

054C JrCDSFailure

A failure was encountered while trying to access the CDS.

Action: Contact your IBM service representative.

054D JrCanNotBeOwner

This system can not be a file system owner thru a move, newroot or recovery operation.

Action: Unix System Services must be recycled to enable this system as a filesystem move target except if this message was issued from a newroot request. Reissue the newroot command after the move filesystem request has completed.

054E JrInCompleteMove

A file system was in the process of changing file owner when the target system (new owner) exited the sysplex during the move operation. The file system is being recovered.

Action: Wait for partition cleanup to complete, then review the status of this file system ('F BPXOINIT,FILESYS=DISPLAY,FILESYSTEM=file system name'). If file owner needs to be changed, use the SETOMVS command to move ownership of the file system.

054F JROutOfGvskCells

The system is unable to obtain a cell from the GVSK cell pool.

Action: See your IBM service representative.

0567 JrSymbFailed

A symlink failed symbol resolution.

Action: Internal service to resolve symbols failed.

0568 JROperUndefined

The operation argument specified with the WRITE_DOWN function for BPX1ENV is undefined.

Action: Specify a defined operation value for the WRITE_DOWN function of BPX1ENV and retry. See BPXYCONS for defined operation values.

0569 JRScopeUndefined

The scope argument specified with the WRITE_DOWN function for BPX1ENV is undefined.

Action: Specify a defined scope value for the WRITE_DOWN function of BPX1ENV and retry. See BPXYCONS for defined scope values.

056A JRNeedTaskAcee

WD_SCOPE_THD scope was specified with the WRITE_DOWN function for BPX1ENV but the calling task does not have a task level ACEE.

Action: Specify WD_SCOPE_AS for the scope argument or create a task level ACEE and retry.

056B JRPoeLenErr

The length specified for the POE mapping is invalid.

Action: Correct the POE length (see BPXYPOE mapping for defined length) and retry.

056C JRPoeScopeErr

The scope option specified in the POE mapping is incorrect either none or both scope options were specified.

Action: Correct the POE scope option (see BPXYPOE mapping for defined scopes) so that one, and only one, is specified and retry.

056D JRPoeEntryTypeErr

The entry type specified in the POE mapping is invalid.

Action: Correct the POE entry type (see BPXYPOE mapping for defined entry types) and retry.

056E JRPoeEntryLenErr

The entry type length specified in the POE mapping is invalid.

Action: Correct the POE entry type length (see BPXYPOE mapping for defined entry type lengths) and retry.

056F JRNotPoeAuthorized

The __poe function can not be perfomed because the caller is not permitted to the BPX.POE FACILITY class profile or is not a superuser.

Action: Permit the caller process to the BPX.POE FACILITY class profile or make the caller a superuser (UID=0).

0570 JrSecurityConflict

A mount request was rejected because the NOSECURITY option was specified when (1) the SECLABEL class was active, or (2) when a nonprivileged user requested the mount operation. The operation is not allowed.

Action: Retry the mount operation without specifying the NOSECURITY option.

0571 JrNoSecLabel

The operation was rejected because the object does not have a security label in an enviroment for which security labels are required.

Action: Assign a security label to the object and retry the operation.

0572 JrTooManyHomeIfs

A stack did not initialize because the Common Inet Sockets PreRouter could not obtain a buffer large enough to hold all of the home interface addresses.

Action: Contact your IBM service representative.

0573 JrTooManyRoutes

A stack did not initialize because the Common Inet Sockets PreRouter could not obtain a buffer large enough to hold all of the network routes.

Action: Contact your IBM service representative.

0574 JrUmountFail

A vfs_umount immediate failed on one or more clients in the sysplex during a remount attempt. The remount cannot proceed.

Action: This may be due to an I/O error while attempting to save data.

0575 JrFIFOInFileSys

Remount is not allowed when there are FIFOs in the filesystem. FIFOs must be closed prior to remount.

Action: Close FIFOs and retry the remount.

0576 JrAggregateErr

Remount is not allowed for a filesystem in an HFS-compatible aggregate if the clone is also mounted.

Action: Unmount the clone and retry the remount.

0577 JrFileDesJustClosed

A descriptor passed on this operation has just been closed by another thread.

Action: This may be a serialization problem within the application. If this was a multi-descriptor operation it should be retried without that descriptor.

0578 JrSeclabelClassInactive

A seclabel can only be set on a file when the SECLABEL class is active.

Action: Activate the SECLABEL class according to the RACF specifications, and try the fuction again.

0579 JRNotSupportedForRemoteFile

The requested service is not supported for a remote file such as a NFS mounted file.

Action: Reissue the request, specifying a non-remote file for the request.

05C0 JRIarv64Serv

An invocation of IARV64 service failed.

Action: Retry the operation at a later time.

05C1 JRIarv64FCErr

An invocation of IARV64FC service failed.

Action: Retry the operation at a later time.

05C2 JRIsMountedRealName

A mounted file system has a real or alias name that conflicts with this mount request.

Action: This duplicate name situation ocurs when either an HFS file system was previously mounted using an alias data set name and the corresponding real data set name conflicts with the file system name specified by this mount request, or the file system name specified on this HFS mount request is an alias data set name that has a real data set name that conflicts with the name of a previously mounted file system. Resolve the duplicate file system names and reissue the mount request.

05C3 JrSMCFcnCode

The specified function code is not valid.

Action: Reissue the BPX1SMC service with a correct function code value.

05C4 JrSMCFcnFlags

The specified function flags are not valid.

Action: Reissue the BPX1SMC service with a correct function flags value.

05C5 JrSMCWrongMutex

The specified mutex is not associated with the specified condition variable.

Action: Reissue the BPX1SMC service with a mutex that is properly associated with the specified condition variable.

05C6 JrSMCNotMutex

The specified shared memory object is not a mutex object (SMMX).

Action: Reissue the BPX1SMC service with a shared memory object that represents a mutex object (SMMX).

05C7 JrSMCNotCondvar

The specified shared memory object is not a condition variable object (SMCV).

Action: Reissue the BPX1SMC service with a shared memory object that represents a condition variable (SMCV).

05C8 JRSMCMutexLocked

A destroy of a shared memory mutex cannot be done because the mutex is currently locked by another thread.

Action: Destroy the mutex after insuring that the mutex is no longer in use.

05C9 JRSMCWaiters

A destroy of a shared memory mutex or condition variable cannot be done because at least one other thread is waiting for the object.

Action: Destroy the mutex or condition variable after insuring that it has no waiters.

05CA JRSMCShrObjAddr

The specified shared object area is not accessible to the caller.

Action: Reissue the BPX1SMC service with a shared memory object that is accessible to the caller.

05CB JRSMCEcbAddr

The specified ecb is not accessible to the caller.

Action: Reissue the BPX1SMC service with a ECB that is accessible to the caller.

05CC JRSMCOutsideWait

A wait function was attempted with the SMC_OutsideWait flag specified which is not an allowed combination.

Action: Reissue the BPX1SMC service for the wait function without the SMC_OutsideWait flag specified.

05CD JRSmcAlreadySetup

A setup to wait function call was attempted from a thread that is already setup to wait.

Action: Reissue the BPX1SMC service for the wait function after canceling the setup to wait from the prior BPX1SMC operation.

05CE JRSmcShmAcc

The caller does not have read/write access to the shared memory segment where the specified shared memory object resides.

Action: Reissue the BPX1SMC service with a shared memory object that resides in a shared memory segment that the caller has read/write access to.

05CF JRSmcNotShared

The specified shared memory object is not in memory shareable by multiple address spaces.

Action: Reissue the BPX1SMC service with a shared memory object that resides in a shared memory segment that the caller has read/write access to.

05D0 JRSMCNotOwner

The calling thread does not own the mutex represented by the specified SMMX data area.

Action: Change the application such that only the mutex owning thread attempts to unlock the mutex.

05D1 JRSMCMaxCntSys

The maximum number of shared memory mutexes and/or condition variables are in use on the system.

Action: Reissue the BPX1SMC service after insuring that another shared mutex or condition variable has been destroyed.

05D2 JRSMCUnusable

The object is no longer usable do to an unexpected failure during an operation against the object.

Action: Change the application such that only the mutex owning thread attempts to unlock the mutex.

05D3 JRSMCMutexSetup

A setup to wait was done for a mutex with incorrect flag options specified.

Action: A setup to wait for a mutex must only specify that an outside wait is requested. Any other request is not valid.

05D4 JRSMCNotSetup

A cancel setup to wait was done but the caller is not currently setup to wait.

Action: Change the application such that cancel setup to wait is done only after a setup to wait function.

05D5 JRSMCMemoryMap

The specified Shared memory object is in memory mapped storage which is not supported.

Action: Reissue the BPX1SMC service with a shared memory object that resides in a shared memory segment that the caller has read/write access to.

05D6 JRSMCMaxCntSeg

The maximum number of shared memory mutexes and/or condition variables are in use for a single shared memory segment.

Action: Reissue the BPX1SMC service after insuring that another shared mutex or condition variable has been destroyed from within the same shared memory segment.

05D7 JRSMCCondWaiters

A destroy of a shared memory mutex cannot be done because at least one other thread is waiting for the associated condition variable.

Action: Destroy the mutex after insuring there are no longer any waiters for the associated condition variable.

05D8 JRSigkillNotSent

A SIGKILL signal must first be sent at least 3 seconds prior to the target process before attempting a superkill.

Action: Send a SIGKILL to the target process.

05D9 JrNoGroups

Can not target a group with a superkill.

Action: Send the superkill to a specific PID.

05DA JrUntargetable

Can not target the address space with a superkill.

Action: The process is no longer associated with a viable address space, no action is required.

05DB JrNoDDorFileSystem

Neither DDNAME nor FILESYSTEM was specified on a MOUNT statement in the processed parmlib member.

Action: Edit the processed parmlib member in SYS1.PARMLIB and specify either a DDNAME or FILESYSTEM for each MOUNT statement.

05DC JrNoOMVSseg

User profile has no OMVS segment.

Action: Provide an OMVS segment for the user's profile.

05DD JrNoUserID

No userid found.

Action: No userID defined.

05DE JrUserIDUnDeftoRACF

UserID is not defined to RACF.

Action: Define a userid for the user to RACF.

05DF JrUserIDUnDeftoRACFIA

User ID is not defined to RACF.

Action: Define a userid for the user to RACF.

05E0 JrMoveBrlmFailure

Active byte range locks failed to move during a file system move.

Action: USS was unable move BRLM locks due to an internal error. It might be possible to move the file system to another system. A system dump may have been created.

05E1 JrAutoMoveable

A filesystem mounted in a mode for which it is capable of being directly mounted to the PFS on all systems is considered automoveable.

Action: An attempt to set the AUTOMOVE setting to NO or INCLUDE or EXCLUDE is rejected.

05E2 JrInvPFS

The requested operation is not allowed for this PFS.

Action: If this is a quiesce request and the PFS is ZFS, use ZFSADM QUIESCE.

05E3 JrTargetPidZombie

The target pid specified is a zombie, AMODE information is not available for this process.

Action: Specify a target pid that has not already exited.

05E4 JRSMCDisabled

Use of a shared memory mutex has been disabled due to a cleanup problem with the application.

Action: Change the application such that usage of all mutexes is complete prior to the cleanup of the shared memory they reside in or the ending of the application

05E5 JRSMCAlreadyInit

Initialization of a shared condition variable or Mutex failed because storage already contains a shared condition variable or mutex.

Action: Change the application such that it does not attempt to reinitialize the same storage with another shared condition variable or mutex.

05E6 JRShrConflict

This open or remove type operation conflicts with a share reservation that has denied the access intended.

Action: Wait awhile and try again or end the program that has the file open with a reservation.

05E7 JRAccessConflict

The file is already open in a way that this open is trying to deny.

Action: Wait awhile and try again or end the program that has the file open.

05E8 JRBlockingDeny

A file may not be opened with Deny flags if O_NONBLOCK is off.

Action: Change the program to set O_NONBLOCK on and to handle the open being rejected with EBUSY.

05E9 JROpenTokMax

The maximum number of v_open tokens have been allocated for this process.

Action: Close some of the open tokens with v_close.

05EA JrNoShrsAtOwner

Share reservations were requested on the open of a file but the file is owned by another sysplex member that is at a level which does not support share reservations so they cannot be enforced.

Action: Move the file system to a sysplex member that is at a release level that is at least z/OS V1R7.

05EB JrCantMoveShares

A file system may not be moved to a sysplex member that does not support share reservations while there are active reservations on any file within that file system.

Action: Move the file system to a sysplex member that is at a release level that is at least z/OS V1R7. Alternatively, stop the applications at the NFS clients who have put reservations on the files, or wait for them to be finished.

05EC JrShrsLost

The sysplex member that owned a file terminated and file system ownership has been taken over by a system that does not support the share reservations that had been established on this file so they can no longer be enforced.

Action: Move the file system to a sysplex member that is at a release level that is at least z/OS V1R7 and then the file can be reopened as it was before. Note: The AUTOMOVE parameter of the MOUNT command can be used to restrict these takeovers to the systems that do support Share Reservations.

05ED JrFileClosed

The file has been closed.

Action: Reopen the file or restart the program involved.

05EE JRInvOpenTok

The Open Token is not valid.

Action: Ensure that the correct Open Token is supplied.

05EF JRStaleOpenTok

The Open Token has been closed.

Action: Ensure that the correct Open Token is supplied.

05F0 JRInvAccess

Access specified on a v_open must be read or write or both.

Action: Specify a combination of ACC_READ and ACC_WRITE.

05F1 JRBadOpenType

The VopnOpenType field on a v_open request has a value that is not supported.

Action: Refer to BPXYVOPN for valid Open type values and reissue the request with a supported value.

05F2 JRCreateParmLen

The length specified on a v_open request for a create parameter is not valid for the type of request.

Action: Verify that a create parameter should be specified for the type of request being issued. If so, ensure it is of appropriate length for the parameter to be passed.

05F3 JRTokNotReg

The VNODE token does not specify a regular file.

Action: The service requested requires a regular file, but the VNODE token passed is not for a regular file. Correct the token and reissue the request.

05F4 JRUpgradeSet

A v_open request for upgrading share options was specified with an access mode or deny mode which is less restrictive than the current setting.

Action: A request to upgrade an existing open must specify an access mode or deny mode which has a greater value than the current settings. Correct the values in the VopnShrAccess and the VopnShrDeny fields and reissue the request.

05F5 JRDowngradeSet

A v_open request for downgrading share options was specified with an access mode or deny mode which is more restrictive than the current setting.

Action: A request to downgade an existing open must specify an access mode or deny mode which has a lesser value than the current settings. Correct the values in the VopnShrAccess and the VopnShrDeny fields and reissue the request.

05F6 JRInvDeny

A share deny specified on a v_open has a value that is not supported.

Action: Refer to BPXYVOPN for valid Deny values and reissue the request with a supported value.

05F7 JRNotRegFile

The operation requested can only be performed on a regular file.

Action: Correct the pathname of the operation to that of a regular file and reissue the request.

05F8 JRWrtOverride

An attempt was made to write to a file with the override of share reservations requested.

Action: Overriding share reservations may only be done for reading from a file, not for writing.

05F9 JRBadTruncSize

An attempt was made to open an exising file with v_open and truncate the file to a non-zero offset.

Action: An existing file can only be truncated to zero when opening with v_open.

05FA JRAttrNotSettable

An attempt was made to open create a file with v_open but the requested attributes for the new file could not be set.

Action: Ensure the appropriate privileges for the attributes specified.

05FB JRICSFModNotFound

ICSF random number generate module not found It is needed to open /dev/random and /dev/urandom.

Action: Contact your system administrator to add the ICSF callable services library to the LINKLSTxx parmlib member and to check for availability of ICSF. Review the system log for message BPXF269I.'

05FC JRICSFnotActive

ICSF must be running to open/read from /dev/random or /dev/urandom.

Action: Check the availability of ICSF with your system administrator.

05FD JRICSFRACFfail

RACF failed your request to use the CSNBRNG service of ICSF Permission is needed to open/read from /dev/random and /dev/urandom.

Action: Contact your system administrator to get RACF permission to the CSFRNG profile in the CSFSERV security class.

05FE JRICSFCardFail

While attempting to open/read from /dev/random or /dev/urandom the PCI Cryptographic Coprocessor or PCI X Cryptographic Coprocessor failed.

Action: Contact your system administrator.

05FF JRICSFCardUnavailable

Could not open/read from /dev/random or /dev/urandom because the specific PCI Cryptographic Coprocessor or PCI X Cryptographic Coprocessor requested for service is temporarily unavailable.

Action: Contact your system administrator.

0600 JRICSFCardnotActive

Could not open/read from /dev/random or /dev/urandom because the required PCI Cryptographic Coprocessor or PCI X Cryptographic Coprocessor was not active.

Action: Contact your system administrator.

0601 JRICSFUnknownErr

An unknown ICSF error occurred while trying to open/read from /dev/random or /dev/urandom.

Action: Contact your system administrator. An OMVS CTrace has been taken with the return codes.

0602 JrLockPurged

A Byte Range Lock request has been canceled while it was waiting.

Action: A waiting synchronous or a pending asynchrouous lock request has been purged or canceled by a thread in the process, or the file has been closed. The lock request may be reissued if the file is still open.

0603 JrBRLMAbend

An abend occurred in the Byte Range Lock Manager.

Action: See your IBM service representative.

0604 JrTokMismatch

The OpenToken passed does not belong to the VnodToken that was passed.

Action: An OpenToken may only be used with the same VnodToken that was specified on the call to v_open that originally created the OpenToken. Insure that this rule is followed.

0605 JrNoVnTok

An OpenToken was passed but not a VnodToken.

Action: On v_lockctl both the OpenToken and the VnodToken are optional, but if an OpenToken is passed then the cooresponding VnodToken must also be passed.

0606 JrAsyncBadAioToken

The async I/O token passed on a cancel request is not valid.

Action: When an asynchronous byte range lock request is scheduled a token is returned in the aiocb that must be used on any subsequent call to cancel the lock request. The original aiocb should not be modified until the asynchronous request completes or is canceled.

0607 JrOwnerMoved

The filesystem is now owned by a different system.

Action: The owner of the filesystem changed while this operation was in progress.

0608 JrOwnerNoSup

No support for this operation by filesys owner.

Action: The owner of the filesystem is not at the release level that supports this operation.

0609 JrClientNoSup

The client is not at the release level that supports blocking when share reservations are enforced within the sysplex.

Action: The file is opened by another program with share reservations. Wait until the program closes the file and retry the failed operation.

060A JrBrlmOutOfStorage

The Byte Range Lock Manager component has reported an out of storage condition.

Action: There should be console messages or other indications of the storage shortage problems and when these are resolved the operation can be retried.

060B JrNoMatchingFStype

This error condition only applies to sysplex configurations This system could not mount a file system that was mounted by another system in the sysplex because there is no active Physical File System that matches the Physical File System TYPE that was specified on the original MOUNT request There are inconsistent FILESYSTYPE statements in the BPXPRMxx parmlib members All systems in the sysplex must specify the same FILESYSTYPE statements.

Action: Verify that each system in the sysplex is configured with the Physical File Systems required by the mount hierarchy. The D OMVS,P system command can be issued on each system in the sysplex to identify the active Physical File Systems on each system. The D OMVS,F system command can also be issued on each system in the sysplex to identify the file systems mounted on each system. The output from these commands can then be compared across all systems in the sysplex to determine if any differences exist.

060C JrShutdownFileOwner

Automounted filesystems are not permitted after shutdown=fileowner has been issued on a system.

Action: This filesystem can be mounted on a system that isn't in the shutdown=fileowner state.

060D JrShrsInFileSys

Remount is not allowed when there are NFS V4 share reservations on any file in the File System. Move is not allowed when a client system has NFS V4 share reservations on any file.

Action: After the files are closed from the NFS clients the remount or move can be tried again.

060E JRUnSupportedKey

The caller of the service is running with a PSW Key that is not supported by the service.

Action: Check the documentation for the service that is returning this error reason code to determine the supported Caller PSW Keys for the service.

060F JRKeyMismatch

The caller of the service is running with a PSW Key that does not match the key of the TCB that it is running on OR the PSW Key of the caller does not match the storage key of a storage area that it is trying to operate against.

Action: For a BPX1MGT service call insure that both the PSW Key and TCB Key are the same. For a BPX1MAT service call insure that the PSW Key and the storage key of the specified shared memory segment are the same.

0610 JRProcessIsReSpawn

The request to register as a permanent or blocking process cannot be performed because the current process is respawnable.

Action: Determine if the process should be respawnable or permanent or blocking. If perm or blocking is desired, use the _BPXK_INITTAB_RESPAWN variable to set off the respawn attribute and issue the request again.

0612 JrShrsNotSupported

The physical file system does not support share reservations.

Action: Do not use share reservations (deny read or deny write) when accessing this file system.

0613 JRRecallFailure

An attempt to retrieve an archived filesystem has failed.

Action: Ensure that the DFHSM Facility is active.

0614 JRAutomountTerm

The automount facility is terminating.

Action: Restart the automount facility.

0615 JRNoOperlogActive

The write to /dev/operlog cannot complete because Operlog is inactive.

Action: Activate Operlog so that subsequent messages can be logged

0616 JROperlogRtFailed

The write to /dev/operlog cannot complete because Operlog Routine has failed to queue messages to operlog.

Action: Attempt the request at another time.

0617 JRNoDaemon

The function could not complete. BPX.DAEMON facility class profile not defined.

Action: To use define the BPX.DAEMON facilty class for your system.

0618 JRIpcRemovedAsy

Between the start of an asynchronous I/O and the I/O completion the IPC message queue was removed and recreated.

Action: Cancel all asynchronous I/O before removing the message queue that is being used.

0619 JrSecEnvrNotSet

The SIOCSECENVR IOCTL with the SET argument was not issued by this server.

Action: To use the SIOCSECENVR IOCTL with the GET argument, the server must first issue the SIOCSECENVR IOCTL with the SET argument.

061A JrDuplicateGet

The SIOCSECENVR IOCTL with the GET argument was already issued by this server.

Action: There is no security object associated with this client. It was already retrieved by a previous SIOCSECENVR IOCTL with the GET argument.

061B JrSECEnvrDeletedByRd

The security object associated with this client has been deleted by a read syscall because the SIOCSECENVR IOCTL with the GET argument was not issued in a timely fashion.

Action: There is no security object associated with this client. It was deleted by the system because a read syscall was issued before the SIOCSECENVR IOCTL with the GET argument. To avoid this from happening, the SIOCSECENVR GET should be issued immediately after the accept() syscall.

061C JrSECENVRerror

An error occurred while processing the security environment for this client so the security environment was deleted.

Action: If the client's security environment is needed, close the client's socket and have the client reconnect to the server.

061D JrNoSECENVRbuffer

An error occured while trying to obtain a buffer to hold the security environment.

Action: There was insufficient storage available for the buffer in the user's address space. Report this problem to the system programmer so the cause of the problem can be determined and corrected

061E JRFormatValueInvalid

First Character of the input message must contain 0x80 for local messages or 0x00 for remote messages.

Action: Enter the call again after changing the invalid parameter to a valid value.

061F JRAutomountLkUp

An error was encountered during pathname lookup because an automount managed file system could not be mounted.

Action: Issue the MVS System Command, 'D OMVS,MF' on the system where the mount failure occurred. From the resulting display, locate the mount failure record for this mount request. Use the return code and reason code from this failure record to determine the exact cause for the mount failure.

0620 JRMountPtInProg

Another file system is in the process of being mounted on the mount point specified.

Action: Choose another moint point for the file system or unount the mount in progress after it has finished

0621 JrOptionFlagsErr

Caller specified a value in the option flags parameter of extended loadhfs that is not a supported value.

Action: Undefined option flags must be zero, make sure to set unused option flags to zero

0622 JrLodDirectedSubpoolError

Caller specified a subpool that is not supported on extended loadhfs call with Lod_Directed option flag.

Action: Request a supported subpool on an extended loadhfs call with Lod_Directed option flag

0623 JrLodDirectedAuthErr

Caller specified the Lod_Directed flag but is not authorized to do so.

Action: Caller must be PSW Key 0-7 or supervisor state or APF authorized

0624 JrLodDirectedNoStorage

Storage obtain request for the directed load failed.

Action: There is insufficient storage available to load requested module into the requested subpool. If the problem persists, contact the system programmer to determine why there is a shortage of storage.

0625 JRPFSIsRecycling

The Physical File System is recycling either on this system, or on the system that is the file system owner.

Action: D OMVS,PFS command done from each system will display if the PFS is recycling. Wait for the recycle to complete and retry.

0626 JrActivityFound

Activity found on the sysplex root file system.

Action: During dynamic sysplex root file system migration, activities were found on the sysplex root file system. Look for message BPXF245I on each system.

0627 JrSecLabelMismatch

During F OMVS,NEWROOT processing, the Seclabel of the current and old roots do not match.

Action: F OMVS,NEWROOT processing stops. The Seclabels should match before the command is issued again.

0628 JrNewRoot

The sysplex root file system has been changed.

Action: Re-drive your suspended operations and new operations again.

0629 JrAlreadyDubbed

The task is already dubbed.

Action: No action is required

062A JrAlreadyUnDubbed

The task is already undubbed.

Action: No action is required

062B JrRemntMode

The file system is already in the mode specified by remount.

Action: Change the remount mode if needed.

062C JrBadSameMode

The file system is not in the mode specified by remount samemode.

Action: Change the mode as necessary.

062D JrAsyncANR

The socket state is not valid to process an accept_and_recv operation.

Action: Asyncio Accept_And_Recv operations cannot be processed on a socket that has processed an accept() operation.

062E JrMountedUnowned

The file system is mounted but unowned.

Action: The file system has been mounted but not available because it is currently unowned. Issue D OMVS,F,N=filesys_name and and F BPXOINIT,FILESYS=DISPLAY,FILESYSTEM= system commands to display the file system status.

An unowned file system should be recovered automatically by the last owner system (specified by the RECOVERY OWNER in the F BPXOINIT,FILESYS=DISPLAY output) or possibly by other systems. Use the D OMVS,MF command on the RECOVERY OWNER system and other systems to determine why the file system could not be recovered automatically. Correct the failure if possible.

To unmount the file system, use the F BPXOINIT,FILESYS=UNMOUNT,FILESYSTEM=filesys_name system command from any system.

062F JrNoRemote

The path specified requires crossing into a remote file system and that is not allowed.

Action: Only specify files and directories that reside in file systems that are local to the server.

0631 JrRemoteRFI

The file specified with Iocc#RegFileInt is in a file system that can be changed without notice.

Action: Files that reside in a R/W sysplex aware zFS file system or that reside in an NFS Client file system can be changed on a remote system without this system knowing. For the zFS case, the file could be moved into an HFS file system or into a Read-Only zFS file system.

0632 JrFSTypeChanged

The File System Type was changed due to generic type support for HFS and ZFS.

Action: This mount could not be completed. The file system type was changed due to one of the following reasons:
  • The file system type specified was HFS and the file system was identified to be a ZFS.
  • The file system type specified was HFS and the file system type can not be identified so the file system type was changed to ZFS.
  • The file system type specified was HFS and the file system is DFHSM migrated so the file system type was changed to ZFS.
  • The file system type specified was ZFS and the file system was identified to be a HFS.

When using 'D OMVS,MF' to view mount failures, entries of JRFsNotStart and JRFsTypeChanged for the same file system may be displayed when the file system is automount managed.

0633 JrPOEActionErr

The __poe() action options were specified incorrectly. POE#ReadPOE, POE#WritePOE and POE#SetGetPOE are mutually exclusive, more than one was specified.

Action: Correct the __poe() action options and retry the operation.

0634 JrPOESocketScopeErr

The __poe() options were specified incorrectly. When POE#ScopeSocket is specifed only POE#ReadPOE is allowed, POE#WritePOE, POE#SetGetPOE or no action option was specified.

Action: Correct the __poe() action options and retry the operation.

0635 JrPOENotAvailable

The __poe() POE#ReadPOE action option was specfied with scope options POE#ScopeProcess or POE#ScopeThread but the specified POE data was not initialized.

Action: Correct the __poe() options or initialize the specified POE data an retry the operation.

0636 JrCannotDecrease

The value specified is less than the current value.

Action: SET OMVS or SETOMVS RESET cannot be used to decrease the current value of INADDRANYCOUNT for CINET. Specify a value greater than the current value.

0637 JrNoINETNwk

A NETWORK statement for AF_INET6 cannot be processed unless there is also an AF_INET NETWORK statement with the same TYPE specified or already active.

Action: Add an AF_INET NETWORK statement to parmlib or to the member specified on the SET OMVS or SETOMVS RESET command. AF_INET6 uses the INADDRANYPORT and INADDRANYCOUNT from the AF_INET NETWORK statement.

0638 JrInAddrAnyNotAllowed

It is not permitted to pass an IP address of all zeros, InAddr_Any or In6Addr_Any, to this service.

Action: Correct the sockaddr to pass a non-zero IP address.

0639 JrAmtNoFsName

The automount file system name was blank because the directory did not match an existing specific entry and the generic entry did not specify a file system name.

Action: Create a specific entry for the directory or add a file system name to the generic entry

063A JrDubDuringExec

An attempt was made to dub a subtask while an exec or spawn for the new job step was in progress.

Action: Do not attempt to invoke z/OS UNIX System Services from another task while an exec or spawn is in progress for the job step task.

063B JrNoSetUID

NOSETUID was not specified on the nonprivileged user mount interface.

Action: Specify the NOSETUID option instead or obtain authority to use SETUID.

063C JrNonEmptyMntPtDir

The mount point directory is not empty.

Action: Retry the mount on an empty mount point directory.

063D JrExceedMaxUsrMntSys

The maximum number of nonprivileged user mounts for the system or sysplex has been exceeded.

Action: Ask the system administrator to use the SET OMVS or SETOMVS command to dynamically increase the maximum number of nonprivileged user mounts. Then retry the nonprivileged user mount.

063E JrExceedMaxUsrMntUsr

The maximum number of nonprivileged user mounts for the user has been exceeded.

Action: Retry the nonprivileged user mount after unmounting one of your mounted file systems.

063F JrNotMntPtOwner

The user does not own the mount point directory when the sticky bit is set.

Action: Ask the system adminstrator to change the ownership of the mount point directory to you.

0640 JrNotRootOwner

The user does not own the file system root when the sticky bit is set.

Action: Ask the system adminstrator to change the ownership of the file system root to you.

0641 JrFileSystemMigrated

The file system name specified on the nonprivileged user mount is HSM-migrated and automount facility is not running.

Action: Recall the HSM-migrated file system or start automount facility then reissue the mount request.

0642 JrSysNameNotAllowed

The system name specification is not supported on the nonprivileged user mount operation.

Action: Retry the nonprivileged user mount without the sysname option.

0643 JrRemountNotAllowed

Remount operation is not allowed for nonprivileged users.

Action: Unmount the file system and then issue a mount request.

0644 JrUserUnMountNotAllowed

The Nonprivileged user is not allowed to unmount a file system that was mounted by another user.

Action: To unmount this file system, reissue the unmount request from a superuser or from the user who mounted this file system.

0645 JrPFSNotSupported

The specified mount point is not in a supported file system for this mount request.

Action: Reissue the request, specifying a mount point that is in a supported file system.

0646 JrNoRootAccess

The nonprivileged user does not have read, write, and search permission to the specified file system root directory.

Action: Ask the system administrator to give you read, write and search permissions for the file system root and reissue the mount or unmount request.

0647 JrNoMntPtAccess

The nonprivileged user does not have read, write and search permission to the specified mount point directory.

Action: Ask the system administrator to give you read, write and search permissions for the mount point directory.Then reissue the mount request.

0648 JrTooManyInProgress

Too many nonprivileged user mounts are in progress at a given time.

Action: Retry the operation. If the problem persists, contact the system administrator.

0649 JrMaxPipesUser

The maximum number of pipes has been exceeded for this user.

Action: The maximum number of pipes and FIFOs that the user can use is specified by the MAXPIPEUSER BPXPRMXX statement. Review the pipe and FIFO usage using the zlsof command.

064A JrMaxPipes

The system limit of 15,360 pipes and FIFOs has been reached.

Action: Contact the system administrator to use the D OMVS,LIMITS system command to review the pipe and FIFO usage for the system, and D OMVS,PIPES to view the pipe and FIFO usage on a user basis.

064B JrBadPET

PET specified in ThliPET was invalid at the time BPX1STE/BPX4STE was invoked. Value must either be zero or a valid unautherized PET.

Action: Retry the operation with a valid value in ThliPET owned by the invoking thread.

064C JrReleasedPET

PET specified in ThliPET has already been released. No timer interrupt has been set for the invoking thread.

Action: The invoking thread should either PAUSE on the PET specified in ThliPET or query the PET for release code.

064D JrUniLseek

This read/write operations fails because an lseek was issued on this file with a prior read or write that caused conversion via Unicode Services with a CCSID that is not a single byte character set.

Action: Once conversion has started, an lseek that changes the file's cursor will cause a subsequent read or write to fail. An exception to this is an lseek that sets the cursor to the beginning of the file (for all reads and for writes that do not cause partial characters to be saved). Any saved partial character is lost. When writing a partial character, a subsequent write must be issued to complete the character so that it can be converted and written to disk.

064E JrUniPartialWrt

A file being converted using Unicode Services on a write request, caused the file system to become full or reached the file size limit without writing all converted characters to the file. Writes of partial characters is not supported.

Action: Free up space or increase the size of the file system

064F JrUniOutOfStorage

Unable to obtain storage for internal buffers used for converting files via Unicode Services.

Action: Close files that are opened and being translated via Unicode Service to free up space.

0650 JrUniPartialChars

A prior write operation on a file being converted using Unicode Services resulted in a partial character being saved but the following operation was a read.

Action: The partial character is lost and never written to disk. When writing a partial character, a subsequent write must be issued to complete the character so that it can be converted and written to disk.

0651 JrUniCharSpec

Character special files are not supported when files are being converted with Unicode Services.

Action: Untag the file or do not open it when the program's CCSID is set.

0652 JrUniOpTooBig

The read or write request trying to convert using Unicode Services specified a length that is too large.

Action: Reissue the operation with a smaller length.

0653 JrUniPartialCharsShr

The read or write request that was converting using Unicode Services, produced a partial character on a shared open at the same time that another thread was doing a read or write.

Action: Threads that share opens and require Unicode Services conversion must coordinate their reads and writes to guarantee data integrity.

0654 JrUniMaxLenTooLong

The maximum character length for one of the CCSIDs being used for conversion is too long.

Action: Contact IBM support.

0655 JrUniMaxIoBufUser

The Unicode I/O buffer storage allowed for this UID has exceeded the system specified amount.

Action: Retry after some threads have ended, or change the maximum allowable limit via the MAXIOBUFUSER system parameter.

0656 JRCanceled

The operation has been canceled.

Action: BPX1AIO(Aio#Cancel) has been called to cancel an operation.

0657 JrUniCCSIDNotSupported

The read or write request trying to convert using Unicode Services failed due to an unsupported CCSID.

Action: Look in the z/OS Unicode Services User's Guide and Reference for a list of supported CCSIDs.

0658 JrCPLFcnReq

The __cpl function code is inconsistent with the request type.

Action: Correct the __cpl function code to one that supports the specified request.

0659 JrCPLParmVer

The input or output parameter version in the structure buffer passed to __cpl is inconsistent with the request type.

Action: Correct the input or output version and ensure that the necessary input parameters associated with the required input version are present.

065F JrMaxThreads

The system has reached the maximum number of threads allowed.

Action: Try the request again after some threads have been exited and detached.

0660 JrSMFTypeSubtypeMismatch

The SMF type or subtype parameters do not match the type or subtype specified in the SMF record to be written.

Action: Change the SMF type and subtype parameters or the SMF type and subtype in the SMF record so that they match.

0661 JrSMFRecordLenMismatch

The SMF record length parameters is smaller than the record length specified in the SMF record to be written.

Action: Change the SMF record length parameter or the SMF record length in the SMF record so that they match.

0662 JROWTTerminated

The service requested was offloaded to an Offload Worker Task that was already terminated.

Action: Restart OMVS and try again.

0663 JrFailedBySyscallExit

The callable service was disallowed by a pre-syscall exit routine. See the THLI control block for information regarding which exit routine rejected the syscall and the return and reason codes returned by the exit routine.

Action: Examine the information in the THLI supplied by the failing exit routine. If possible, resolve the issue identified by the exit and retry the syscall if appropriate.

0664 JrSyscallExit

The callable service attempted is not allowed to be called from a dynamic syscall exit routine.

Action: See z/OS UNIX System Services Programming: Assembler Callable Services Reference for a list of callable services that cannot be called from a dynamic syscall exit routine.

0665 JJRMigNFSFile

The file system specified for the migration contains open NFS files and that is not allowed.

Action: Wait until all NFS files are closed and try the migration again.

0666 JRMigTargetMounted

The target file system specified on the migration command is already mounted.

Action: If the target file system name is correct, unmount the file system. Otherwise, specify the correct file system.

0667 JRMigTgtNotEmpty

The target file system is not empty and this is not allowed.

Action: Delete all files in the file system before starting the migration.

0668 JRMigNotLocal

The source file system is not mounted locally.

Action: Move the file system so that it is mounted locally or initiate the migration request from the owning system.
0669 JRMigNotStarted

The specified source file system has not been designated for migration.

Action: Initiate the migration before trying to change the migration settings.

0670 JRMigIsSwapping

The specified source file system is in the process of being swapped.

Action: Migration settings can no longer be changed for this file system.

0671 JrMigAlreadyInProgress

Migration is being canceled for the specified source file system.

Action: Restart the migration before trying to make changes to the migration settings.

0672 JRMigIsCanceled

Only one migration is allowed to be in progress.

Action: Retry after the current migration is complete.
0673 JRMigSrcNotHFS

The specified source file system must be of type HFS.

Action: Retry the migration command with an HFS file system.

0674 JRInvMigCmd

The specified migration subcommand is not valid.

Action: Respecify the migration subcommand.
0675 JrSwapMissingTgtVnodPtr

One or more source vodes do not have pointers to corresponding target vnodes during a migration swap attempt.

Action: Determine the reason for the missing target vnode pointers.
0676 JrSwapDirInUse

One or more directories are actively being read during a migration swap attempt.

Action: Delay and retry the swap.
0677 JRMigFsOptionsLen

The FsOptions length specified for the modify migration is too long.

Action: Verify why the FsOptions are too long and correct the error.

0678 JRMigBadRename

The trename option was specified on a modify migration but the result would leave the source and the target file systems with the same name.

Action: Change either the target name or source name and then retry the modify migration request.

0679 JRMigRenameTgtErrInt

An internal error occurred. File system migration failed to rename the target file system

Action: Examine the LOGREC for the reason of the failure.

067A JRMigCancelNotAllowed

The specified file system migration is not allowed to be canceled at this time.

Action: Retry the cancel command later.

067B JrMigWriteAmt

During a migration, a mirroring write failed to write enough bytes. The migration has been canceled.

Action: Allocate a larger target zFS file system and retry the migration.

067C JRMigNotActive

The specified file system migration is not active.

Action: Check the source file system name.

067D JRMigSwapInProgress

A migration cancel is not allowed when the swap is in progress.

Action: If the swap isn't successful, try canceling the migration again.

067E JRMigNoStorage

There is not enough storage in the kernel address space.

Action: This should be a transient condition. Reissue the service. If the problem persists, contact the system programmer or system administrator to diagnose the storage usage in the kernel address space.

067F JRMigNotMirrored

The source file system for migration must be mirrored before you can compare the contents.

Action: Use the migration query function of BPXWMIGF to obtain the state of the migration.

0680 JRMigIsExported

The file system specified for the migration is exported and that is not allowed.

Action: Unexport the file system first and then try the migration command again.

0681 JRMigInProgressFs The specified file system has already been designated for migration.

Action: If the file system name specified is correct, wait for the migration to finish. Otherwise, specify the correct file system name.

0682 JRMigDownLevel

A system in the sysplex is at a lower release level that does not support file system migration.

Action: Retry the migration when the down-level system is not a member of the SYSBPX sysplex group.

0683 JRSwapOWInProg

One or more operations are actively in an osi wait during a migration swap attempt.

Action: Wait for the operations to end and then retry the swap.

0684 JRRM64AM31

The invoking task attempted to load an rmode64 program while running amode31.

Action: To access the returned 64-bit address, the invoking task must run amode64 and use the BPX4LOD interface.

0685 JRRMODE64NOTSUPPORTED

Service does not support rmode 64.

Action: A parameter was passed for an executable address that was greater then a 31 bit address. Address must reside below the 2-gigabyte address range.

0686 JRMigRenameTgtErr

File system migration failed to rename the target file system.

Action: Examine the IDCAMS messages in the LOGREC for the reason of the failure.

0687 JRMigRenameTgtErr

File system migration failed to rename the target file system.

Action: Examine the IDCAMS messages in the LOGREC for the reason of the failure.

0688 JRMigNotAllowed

Migration file system is not allowed to start.

Action: An operation such as file system remount, unmount or move occurred recently that prevents file system migration for about 20 minutes. Try again later.

0695 JrNoUserCat

zFS file system data set is not allowed to be cataloged in the Master Catalog.

Action: Define an alias to the user catalog for the new zFS.

0696 JRIOCTLBackupClient

The backup command for the ioctl cannot be issued from a file system client.

Action: Issue the ioctl for more backup from a system that is not a file system client.

7101 JrSipcOPEN

SNAckets IPC Open error occurred.

Action: See your IBM service representative.

7102 JrSipcCONNECT

SNAckets IPC Connect error occurred.

Action: See your IBM service representative.

7103 JrSipcCLOSE

SNAckets IPC Close error occurred.

Action: See your IBM service representative.

7200 JRAckLenFailure

The size of the TPI data is not large enough to support the Prim_type field.

Action: Unrecoverable error. Contact the systems programmer.

7201 JRUnExpectedAck

The Prim_type received from the TPI request does not match the request.

Action: Unrecoverable error. Contact the systems programmer.

7202 JRAlreadyBound

The Socket has already been bound by a previous request.

Action: This protocol does not support multiple binds to the same socket.

7203 JRNotBound

Read not allowed on unbound socket unless it is RAW.

Action: Bind the socket and retry the request.

7204 JRWrongBand

Message received on wrong band.

Action: Unrecoverable error. Contact the systems programmer.

7205 JRTLIerror

ERRNO returned by the transport layer interface.

Action: See ERRNO.

7206 JRConnFail

Previous connection request on this socket failed.

Action: Check previous connection request to determine why it failed.

7207 JRCFGMREQLenErr

The size of the returned buffer is not large enough to support a CFGMREQ structure.

Action: Unrecoverable error. Contact the systems programmer.

7208 JRBulkModeErr

The type of socket request specified is not valid for a Bulkmode socket.

Action: Specify a valid socket request for the bulkmode socket.

7209 JrIOCTLAccessAuthorization

The user does not have access authority for the requested ioctl.

Action: APF, OE Superuser or RACF authorization is required for SET ioctl's.

720A JRIOCTLSizeIncorrect

The size of the structure used in the ioctl is not correct.

Action: Verify that the structure passed to the ioctl is correct.

720B JRIOCTLAFNotSupported

The address family is not supported for the specified ioctl.

Action: Verify the socket address passed on the ioctl is correct.

720C JRIOCTLRTTableSize

The TCP/IP Route table does not fit in the buffer pro vided.

Action: Iocn_RtMsgHdrType.Iocn_RtMsgHdrNumEnt specifies the number of entries in the route table.

720D JRIOCTLTPrimNotSet

No primary interface is defined to TCP/IP.

Action: Use the Home statement to define an interface to TCP/IP.

720E JRIOCTLLinkName

The ifr_name specified was not found to be a valid, defined link name.

Action: Verify the ifr_name specified. Ensure that a LINK statement defined this name to TCP/IP.

720F JRDevNumInvalid

The device number specified is not valid for the operation.

Action: Verify that the device number specified is correct.

7210 JRIPAddrInvalid

The IP address specified is not valid for the operation.

Action: Verify that the IP address specified is correct.

7211 JRLinkNameInvalid

The link name specified is not valid for the operation.

Action: Verify that the link name specified is correct.

7212 JRInterfaceInvalid

The interface specified is not valid for the operation.

Action: Verify that the interface specified is correct.

7213 JRDeviceCTCInvalid

The device conflicts with a CTC device.

Action: Verify that the device number specified is correct.

7214 JRDeviceCLAWInvalid

The device conflicts with a CLAW device.

Action: Verify that the device number specified is correct.

7215 JRDeviceLCSInvalid

The device conflicts with a LCS device.

Action: Verify that the device number specified is correct.

7216 JRLinksMaxExceeded

The number of link names has been exceeded.

Action: Verify that the link is correct.

7217 JRInterfaceAlreadyStopped

The Interface is already stopped.

Action: Verify that the device number specified is correct.

7218 JRInterfaceAlreadyStarted

The interface is already started.

Action: Verify that the device number specified is correct.

7219 JRDeviceNotDefined

The device number specified is not defined.

Action: Verify that the device number specified is correct.

721A JRDeviceAlreadyDefined

The device is already defined.

Action: An attempt was made to create duplicate devices.

721B JRDeviceUnsupported

The device type is unsupported.

Action: An attempt was made to create an unsupported device type.

721C JRDeviceActive

The device type is active.

Action: An attempt was made to delete an active device.

721D JRConfigErr

Config statement is in error.

Action: One of the following errors was encountered when processing a config statement:
  • The config statement is outside of its Beg/End statements.
  • An attempt was made to delete an interface via the INTERFACE statement but the interface is in use as a SOURCEVIPAINTERFACE.
  • An attempt was made to define an interface via the DEVICE and LINK statements but inconsistent types were specified.
  • An INTERFACE statement was specified to define an interface with multiple-VLAN support but the statement parameters violated the multiple-VLAN rules.

Correct the config statement and restart the function.

721E JRAFNotSupported

Address Family is not supported.

Action: Verify that the address family was properly specified in the SockAddr structure.

721F JRTCPNotUp

TCP/IP is not initialized.

Action: Start TCP/IP Initialization.

7220 JRUDPNotUp

TCP/IP is not initialized.

Action: Start TCP/IP Initialization.

7221 JRGetConnErr

The connection was not in the proper state for retrieving.

Action: Try the request later.

7222 JRPATFNDErr

Search for a restricted port failed.

Action: Verify the restricted port table.

7223 JRPATFNXErr

Search for restricted ports failed.

Action: Verify the restricted port table.

7224 JRPATADDErr

Add new restricted port failed.

Action: Verify the restricted port table.

7225 JRPATDELErr

Delete a restricted port failed.

Action: Verify the restricted port table.

7226 JRPATExistErr

Restricted port entry already existed.

Action: Verify the key of the added entry.

7227 JRPATNotFound

Restricted port entry is not found.

Action: Verify the key of the deleted entry.

7228 JRInvaliddAddr

Specified address is not valid.

Action: Verify the destination address in the SockAddr structure.

7229 JRPortRErr

The input specified in the port range statement is not valid.

Action: Verify that the port range was properly specified in the Add Port Range statement.

722A JRInterfaceDefinedByHome

The interface has been used within a Home statement.

Action: Remove the Interface from the Home list.

722B JRDeviceDefinedByLink

The device is defined by a Link statement.

Action: Remove the Link statement that uses the device.

722C JRDeviceTypeInvalid

The device type is not valid for the operation requested.

Action: Verify that the device type of the device is correct.

722D JRBSDRoutingParmsNeverUsed

BSDRoutingParms were never configured for TCP/IP.

Action: Add BsdRoutingParms to TCP/IP Configuration.

722E JRBINDOutState

The current TPL state is not unbound when doing a bind request.

Action: Validate the specified port number and IP address in the bind request.

722F JRBINDBadSockAddr

Bad Socket Address data present in the source IP address.

Action: Validate the IP address in the bind request.

7230 JRBINDAddrNActive

Local address was not active when processing the bind request.

Action: Validate the specified IP address in the bind request.

7231 JRBINDNoPort

No port is available. Port entries have reached the maximum number.

Action: TCP/IP is running out of connection IDs. Wait and retry the bind request later.

7232 JRBINDAddrInUsed

The INADDR_ANY is being used by other users. The bind request fails.

Action: Try the bind request later.

7233 JRUNBINDNotIDLE

The requested connection was not in the proper state for the request.

Action: Try the unbind request later.

7234 JROPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

7235 JRSendLimit

The send buffer size is not valid. It is too big.

Action: Validate the option management send buffer request.

7236 JRRcvdLimit

The received buffer size is not valid. It is too big.

Action: Validate the option management receive buffer request.

7237 JRBSTOpt

The value specified for option_value is not valid.

Action: Reissue the request with a valid value.

7238 JRBRTOpt

The value specified for option_value is not valid.

Action: Reissue the request with a valid value.

7239 JRIPOpt

The value specified for option_value is not valid.

Action: Reissue the request with a valid value.

723A JRTOSOpt

The value specified for type of service is not valid.

Action: Reissue the request with a valid value.

723B JRTTLOpt

The value specifed for time to live is not valid.

Action: Reissue the request with a valid value.

723C JRIPOPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

723D JRTOSOPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

723E JRTTLOPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

723F JRConnNotIdle

Connect request not in idle state.

Action: Connect should only be issued after bind request.

7240 JRBroadcastDest

Cannot connect to a broadcast address.

Action: Specify a valid address.

7241 JRConnectToSelf

Connect address is the same as the source address.

Action: Specify a valid address.

7242 JRConnTCBNotFound

A TCB was not found for the specified socket.

Action: Use a valid socket descriptor.

7243 JRBadTCBEye

The TCB has been freed or overlaid.

Action: Refer to provided diagnostic information to resolve the problem. Contact service for assistance.

7244 JRNoAcceptTCB

There is no valid TCB on the accept queue.

Action: Refer to provided diagnostic information to resolve the problem. Contact service for assistance.

7245 JRDisconTCBNotFound

The TCB could not be found for disconnect.

Action: Refer to provided diagnostic information to resolve the problem. Contact service for assistance.

7246 JRPortAccessAuth

User does not have authority to access this port.

Action: Specify a valid port.

7247 JRPortBusy

Specified port is in use.

Action: Specify a port not in use or try again later.

7248 JRSENDOPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

7249 JRRECVOPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

724A JRBSTOPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

724B JRBRTOPTLERR

The value specified for option_length is not valid.

Action: Reissue the request with a valid value.

724C JRRtInvalidTOS

Specified route type of service is not valid.

Action: Specify a valid route type of service.

724D JRRtInvalidGateWayAddr

Specified route gateway address is not valid.

Action: Specify a valid route gateway address.

724E JRRtInvalidProtocol

Specified route protocol is not valid.

Action: Specify a valid route protocol address.

724F JRRtInvalidType

Specified route type is not valid.

Action: Specify a valid route type address.

7250 JRRtInvalidDest

Specified route destination is not valid.

Action: Specify a valid route type address.

7251 JRRtInvalidMask

Specified route subnet mask is not valid.

Action: Specify a valid subnet mask.

7252 JRRtInvalidHostAddr

Specified route host ip address is not valid.

Action: Specify a valid host ip address.

7253 JRHardwareTypeNotSupported

Specified hardware type is not supported.

Action: Specify a supported hardware type.

7254 JRLinkTypeInvalid

The link type is not valid for the operation requested.

Action: Verify that the link type of the device is correct.

7255 JRNoHomeStatement

The link name does not have an associated home statement.

Action: Verify that the link name specified has a home statement.

7256 JRIOCTLNotSupported

The specified ioctl is not supported in this version of TCP/IP.

Action: Unrecoverable error. The ioctl type does not exist.

7257 JRLVLSOCNOSUP

The option_name that was specified is not supported.

Action: Reissue the request with a valid option_name.

7258 JRLVLTCPNOSUP

The level that was specified is not supported.

Action: Reissue the request with a valid level.

7259 JRLVLIPNOSUP

The option_name that was specified is not supported.

Action: Reissue the request with a valid option_name.

725A JRInvOptLen

The option length is not valid.

Action: Validate the option length.

725B JRInvOptVal

The option value is not valid.

Action: Validate the option value.

725C JRConnAlreadyExists

The address is already in use.

Action: Specify an address that is not in use.

725D JRStartNonDeviceInvalid

An attempt was made to start an interface which is not a device.

Action: Specify a device on the START command.

725E JRBadIOCTLToIF

An internal error occurred between the ioctl and Interface layer.

Action: Contact your IBM service representative.

725F JRLinkNotDefined

The link name specified is not defined.

Action: Verify that the link name specified is correct.

7260 JRMaxStartsExceeded

An internal limit of START DEVICEs has been exceeded.

Action: Contact your IBM service representative.

7261 JRDeviceHasLinks

An attempt was made to DELETE a device, but the device has at least one LINK defined to it.

Action: Delete the link(s) and then delete the device.

7262 JRDeviceHasNOLinks

An attempt was made to START a device, but the device has no LINKs defined to it.

Action: Define a link to the device.

7263 JRInterfaceNotDefined

The interface specified is not defined.

Action: Define the interface.

7264 JRRtAlreadyExists

The route already exists.

Action: Delete the route and retry.

7265 JRRtNotDefined

The route is not defined.

Action: Route to be deleted is not defined.

7266 JRRtRemoveDirectError

The route to be removed is a direct route.

Action: Correct the route type information.

7267 JRGateWayUnreachable

The gateway is unreachable by any routes.

Action: Add a route to the gateway and retry.

7268 JRRtRemoveIndirectError

The route to be removed is an indirect route.

Action: Correct the route type information.

7269 JRArpsvMult

Multiple ATMARP servers are defined for the same link.

Action: Correct the ATMARPSV statement to specify only one ATMARP server for the link.

726A JRDeviceMPCPTPInvalid

A MPCPTP link was defined for an incorrect device type.

Action: Correct the link statement to point to a MPCPTP device.

726B JRDeviceHCHInvalid

An HCH link was defined for an incorrect device type.

Action: Correct the link statement to point to an HCH device.

726C JRDeviceCDLCInvalid

A CDLC link was defined for an incorrect device type.

Action: Correct the link statement to point to a CDLC device.

726D JRDeviceX25Invalid

An X.25 link was defined for an incorrect device type.

Action: Correct the link statement to point to an X.25 device.

726E JRDeviceATMInvalid

An ATM link was defined for an incorrect device type.

Action: Correct the link statement to point to an ATM device.

726F JRLinkAlreadyDefined

The link is already defined.

Action: Correct the profile to remove the duplicate link definition.

7270 JRPvcAlreadyDefined

The PVC is already defined.

Action: Correct the profile to remove the duplicate PVC definition.

7271 JRPvcNotDefined

The PVC name specified is not defined.

Action: Verify that the PVC name specified is correct.

7272 JRLisNotDefined

The LIS name specified is not defined.

Action: Verify that the LIS name specified is correct.

7273 JRArpsvNotDefined

The ATMARPSV name specified is not defined.

Action: Verify that the ATMARPSV name specified is correct.

7274 JRLisInUseForDevice

Another LINK for this device already specifies this LIS.

Action: Correct the LIS name on the LINK statement.

7275 JRPvcLinkNotATM

An ATMPVC was defined for an incorrect link type.

Action: Correct the ATMPVC statement to point to an ATM link.

7276 JRLisInconsistent

The LIS name is already defined with a different subnet value/mask.

Action: Correct the ATMLIS statement to define the same subnet value and subnet mask.

7277 JRLisOptionsUpdated

An ATMLIS redefiniton caused the LIS options to be updated.

Action: None required if this was the intended result.

7278 JRPvcInUseAsArpsv

An attempt was made to delete an ATMPVC which is in use as an ATMARP server.

Action: Stop the ATM device which is using this PVC as an ATMARP server.

7279 JRLinkHasPvcs

An attempt was made to DELETE a LINK, but the LINK has at least one ATMPVC defined to it.

Action: Delete the link(s) and then delete the ATMLIS.

727A JRLisHasLinks

An attempt was made to DELETE an ATMLIS, but the ATMLIS has at least one LINK defined to it.

Action: Delete the link(s) and then delete the ATMLIS.

727B JRLisHasArpsvs

An attempt was made to DELETE an ATMLIS, but the ATMLIS has at least one ATMARPSV defined to it.

Action: Delete the ATMARPSV(s) and then delete the ATMLIS.

727C JRArpsvInUse

An attempt was made to DELETE an ATMARPSV, but at at least one ATM device is using the ATMARPSV.

Action: Stop the device(s) currently using the ATMARP server and then delete the ATMARPSV.

727D JRNotInLis

The IP address of a defined ATMARPSV is not in the specified LIS.

Action: Correct the ATMARPSV statement to specify a consistent LIS name and IP address.

727E JRTELSTATERR

Attempt to update the telnet attributes when the connection is not yet established.

Action: Verify the socket address of the telnet entry or try it later.

727F JRTELNFNDERR

Telnet session is not found.

Action: Verify the socket address of the requested telnet entry.

7280 JRArpsvAlreadyDefined

The ATMARPSV is already defined.

Action: Correct the profile to remove the duplicate ATMARPSV definition.

7281 JRLisMismatch

The LIS name on the ATMARPSV PVC statement does not match the LIS defined on the link to which the specified PVC is defined.

Action: Correct the profile to specify the correct LIS name.

7282 JRDeviceSNAInvalid

A SNA link was defined for an incorrect device type.

Action: Correct the link statement to point to a SNA device.

7283 JRLinkHasNoPvcOrLis

An ATM link was defined but did not specify a LIS and has no PVCs defined to it.

Action: Correct the link statement to specify a LIS or define an ATMPVC for the link.

7284 JRRtInvalidMaskHost

A host route with a non-zero mask was received.

Action: Update the subnet mask to be zero or the route flag to be non-zero and rerun the command.

7285 JRRtInvalidMaskDefault

A non-default route was received with a destination of 0.

Action: Update the destination address or the default route flag and rerun the command.

7286 JRRtNoBsdRoutingParmsSet

A route was added for a link without BSDRoutingParms.

Action: Use VARY TCPIP,OBEYFILE to set BSDRoutingParms for the link used by the route.

7287 JrRtInvalidMaskCidr

The mask does not conform to CIDR requirement.

Action: The mask field must have contiguous one bits until the first zero bit. No ones are allowed after the first zero.

7288 JrMsgInvalidFlag

The socket does not support the function that was specified with the flags parameter.

Action: Reissue the request with a valid function.

7289 JrVariableSubnettingNotAllowed

IPCONFIG did not specify RIPV2 or length of rtentry is wrong.

Action: Correct IPCONFIG statement with VARSubnetting or the length of the rtentry. There is a new length for Variable Subnetting (RIPV2).

728A JRsysplexAddrNotFound

The sysplex loopback address 127.0.0.128 could not be resolved to the sysplex domain name by the gethostbyaddr() syscall.

Action: Verify the DNS configuration. Ensure that the TCP/IP stack points to an active DNS in the same sysplex and that the DNS has the PTR record for the 128 host defined in the 0.0.127.in-addr.arpa. zone.

728B JRresNotFoundInDNS

The specified group or server+group name could not be found within the sysplex domain.

Action: Determine whether the requested resource exists within the cluster domain in the sysplex DNS. If the resource does not exist within the DNS data base, then start or re-register the specified resource.

728C JRgroupNameRequired

A server name was specified in the sysplexFqDnData structure without a group name.

Action: Specify a group name in the sysplexFQDnData structure.

728D JRinvalidBufTokn

An incorrect CSM buffer token was provided.

Action: The communication storage manager detected that the CSM buffer token being used on the socket call has previously been freed. The application could optionally take a FFST dump to record key application-specific data areas. The application can reissue the socket call using a different CSM buffer.

728E JRMCTTLOpt

The value specified for multicast time to live is not valid.

Action: Reissue the request with a valid value.

728F JRMCTTLOptLErr

The value specified for option length is not valid.

Action: Reissue the request with a valid value.

7290 JRMCLoopOpt

The value specified for multicast loopback is not valid.

Action: Reissue the request with a valid value.

7291 JRMCLoopOptLErr

The value specified for option length is not valid.

Action: Reissue the request with a valid value.

7292 JRMCIFOpt

The value specified for multicast interface is not valid.

Action: Reissue the request with a valid value.

7293 JRMCIFOptLErr

The value specified for option length is not valid.

Action: Reissue the request with a valid value.

7294 JRMCAddMemOpt

The value specified for multicast add membership is not valid.

Action: Reissue the request with a valid value.

7295 JRMCAddMemOptLErr

The value specified for option length is not valid.

Action: Reissue the request with a valid value.

7296 JRMCDropMemOpt

The value specified for multicast drop membership is not valid.

Action: Reissue the request with a valid value.

7297 JRMCDropMemOptLErr

The value specified for option length is not valid.

Action: Reissue the request with a valid value.

7298 JRMCMaxMem

The maximum number of groups per socket has been exceeded.

Action: Change the program to not join more than 20 groups.

7299 JRIESizeMismatchAdd

Request area was not large enough on add/remove.

Action: See your IBM service representative

729A JRIESizeMismatchGet

Request area was not large enough on get.

Action: See your IBM service representative

729B JRIESizeMismatchGetTable

Request area was not large enough on Get Table.

Action: See your IBM service representative

729C JRIESizeMismatchSetTable

Request area was not large enough on Set Table.

Action: See your IBM service representative

729D JRIEOutCntInvalid

cOutCnt is zero or less than the cInCnt.

Action: See your IBM service representative

729E JRIEInCntInvalid

cInCnt is zero.

Action: See your IBM service representative

729F JRIEGetTableFlags

Flags set on a GetTable.

Action: See your IBM service representative

72A0 JRIEGetFlags

Flags set on a Get.

Action: See your IBM service representative

72A1 JRIESetTableFlags

Flags set on a SetTable.

Action: See your IBM service representative

72A2 JRIESetFlags

Flags set on a Set.

Action: See your IBM service representative

72A3 JRIEGetTableUnexpected

Unexpected error on GetTable.

Action: See your IBM service representative

72A4 JRIEGetUnexpected

Unexpected error on Get.

Action: See your IBM service representative

72A5 JRIESetTableUnexpected

Unexpected error on SetTable.

Action: See your IBM service representative

72A6 JRIESetUnexpected

Unexpected error on Set.

Action: See your IBM service representative

72A7 JRIERecoveryError

Unexpected error on Recovery.

Action: See your IBM service representative

72A8 JRIEProfileError

Unexpected error during profile processing.

Action: See your IBM service representative

72A9 JRIEAddifcioctltype

Attempt to add an ifcioctl with ifhtype not iflifc.

Action: See your IBM service representative

72AA JRIEUnknownifcioctlType

Unknown ifcioctl Type attempted.

Action: See your IBM service representative

72AB JRTcpTcpipError

Refer to TSRB return and reason codes.

Action: See your IBM service representative

72AC JRTcpInvalidTcpipName

Invalid Tsrb_Tcpip_Name.

Action: See your IBM service representative

72AD JRTcpInvalidRequestCode

Invalid Tsrb_Request_Code.

Action: See your IBM service representative

72AE JRTcpNotInstalledOrUp

TCPIP not installed or active.

Action: See your IBM service representative

72AF JRTcpInvDelete

The delete requestor did not create the connection.

Action: See your IBM service representative

72B0 JRTcpInvUserData

Request contained invalid user data.

Action: See your IBM service representative

72B1 JRSKCIBInvalidMessage

Invalid IOCTL message type.

Action: See your IBM service representative

72B2 JRSKCIBAlreadySleeping1

Recursive context sleep.

Action: See your IBM service representative

72B3 JRSKDKINotReadQueue

Invalid queue for find open/close.

Action: See your IBM service representative

72B4 JRSKDKINotWriteQueue

Invalid queue for find poll/iocport.

Action: See your IBM service representative

72B5 JRSKDKIBadFindType

Invalid type for find.

Action: See your IBM service representative

72B6 JRSKDKINotFound

No such device/module for find.

Action: See your IBM service representative

72B7 JRSKDKIBadQGetType

Invalid type for queue get info.

Action: See your IBM service representative

72B8 JRSKDKIBadQSetType

Invalid type for queue set info.

Action: See your IBM service representative

72B9 JRSKHEDBadOpen

Open of stream head driver not allowed.

Action: See your IBM service representative

72BA JRSKMNTBadMessage

Invalid message type.

Action: See your IBM service representative

72BB JRSKMNTSnooperAlreadyActive

Snooper module previously pushed.

Action: See your IBM service representative

72BC JRSKMNTSnooperNotActive

Snooper module not previously pushed.

Action: See your IBM service representative

72BD JRSKSTOBadIndex

Invalid starting index for STREAMOP.

Action: See your IBM service representative

72BE JRSKSTOBadStream

Invalid stream address for STREAMOP.

Action: See your IBM service representative

72BF JRSKSTOBadMessageType

Invalid message type for read.

Action: See your IBM service representative

72C0 JRSKSTONoEmptyMessages

Zero message length invalid for write.

Action: See your IBM service representative

72C1 JRSKSTOMessageTooShort

Message length too short for write.

Action: See your IBM service representative

72C2 JRSKSTONoControlPart1

No control part for putpmsg.

Action: See your IBM service representative

72C3 JRSKSTOBadMessageLength1

Invalid message length for putpmsg.

Action: See your IBM service representative

72C4 JRSKSTOBadMessageLength2

Invalid message length for lputpmsg.

Action: See your IBM service representative

72C5 JRSKSTOBadControlInformation

Invalid control information for fdinsert.

Action: See your IBM service representative

72C6 JRSKSTONoMessages

No queued messages for getband.

Action: See your IBM service representative

72C7 JRSKSTOResourceShortage2

Unable to get triple for M_READ message.

Action: See your IBM service representative

72C8 JRSKSTOResourceShortage3

Unable to get triple for M_IOCTL message.

Action: See your IBM service representative

72C9 JRSKVRBBadOption1

Invalid option for open.

Action: See your IBM service representative

72CA JRSKVRBNotUp

System not initialized.

Action: See your IBM service representative

72CB JRSKVRBBadName

Invalid name for push.

Action: See your IBM service representative

72CC JRSKVRBNoResources1

Unable to allocate queues for push.

Action: See your IBM service representative

72CD JRSKVRBNothingPushed1

No pushed module exists for pop.

Action: See your IBM service representative

72CE JRSKVRBNotMultiplexed

Driver not multiplexed for link.

Action: See your IBM service representative

72CF JRSKVRBNotLinked

No linked driver/module for unlink.

Action: See your IBM service representative

72D0 JRSKVRBBadType

Invalid type for flush.

Action: See your IBM service representative

72D1 JRSKVRBNoResources2

Unable to get triple for M_FLUSH message.

Action: See your IBM service representative

72D2 JRSKVRBBadMask

Invalid signal mask for setsig.

Action: See your IBM service representative

72D3 JRSKVRBBadAction

Invalid action for setsig.

Action: See your IBM service representative

72D4 JRSKVRBBadID

Invalid identifier for spgrp.

Action: See your IBM service representative

72D5 JRSKVRBBadFlag

Invalid flag for spgrp.

Action: See your IBM service representative

72D6 JRSKVRBNoErrno

No error number for spgrp.

Action: See your IBM service representative

72D7 JRSKVRBBadOption2

Invalid behavior option for srdopt.

Action: See your IBM service representative

72D8 JRSKVRBBadOption3

Invalid message option for srdopt.

Action: See your IBM service representative

72D9 JRSKVRBBadOption4

Invalid length option for swropt.

Action: See your IBM service representative

72DA JRSKVRBBadClass1

Invalid IOCTL class for str.

Action: See your IBM service representative

72DB JRSKVRBBadClass2

Invalid IOCTL class for transprnt.

Action: See your IBM service representative

72DC JRSKVRBNoResources3

Unable to get triple for M_IOCTL message.

Action: See your IBM service representative

72DD JRSKVRBNothingPushed2

No module pushed for look.

Action: See your IBM service representative

72DE JRSKASMBadType

Invalid type for ?SKASM(*RANGE).

Action: See your IBM service representative

72DF JRSKSACNoStream

Invalid stream @ for ?SKSAC(*ACCESS).

Action: See your IBM service representative

72E0 JRSKSACLinkedStream

Invalid stream for ?SKSAC(*ACCESS).

Action: See your IBM service representative

72E1 JRMultipleRead

A request to receive data is already outstanding.).

Action: Reissue the socket call after the outstanding call has completed.

72E2 JRDeviceMPCHLCSInvalid

A MPC HPDT/LCS link was defined for an incorrect device type.

Action: Correct the link statement to point to a MPC HPDT/LCS device.

72E3 JRCmConfigured

Cache Manager has been configured for this server socket.

Action: Verify the specified socket descriptor and reissue the socket call

72E4 JRCmNoLog

Cache Manager Configuration parameter does not include the size of the log file.

Action: Verify the log size value in the Cache Manager Configured request

72E5 JRCmNoCache

Cache Manager Configuration parameter does not include the size of the cache file.

Action: Verify the cache size value in the Cache Manager Configured request

72E6 JRCmServerNotFound

Cache Manager has not been configured for this server socket.

Action: Run Cache Manager configuration IOCTL and reissue this IOCTL.

72E7 JRCmCantLoad

Invalid Dynamic Exit load module name specified in the Config IOCTL parameters.

Action: Verify the load module name and reissue the socket call.

72E8 JRCmNoStorage

Cache Manager encountered storage shortage.

Action: See your IBM service representative

72E9 JRCmNoCSm

Cache Manager encountered a CSM storage shortage.

Action: See your IBM service representative

72EA JRCmNotConfigured

Cache Manager has not been configured for this server socket.

Action: Verify the specified socket descriptor and reissue the socket call

72EB JRNotCmAuthorized

User is not allowed to use Cache Manager function.

Action: See your IBM service representative

72EC JRCmParmNotValid

Invalid parameters used in Cache Manager IOCTL call.

Action: Verify the specified parameters and reissue the socket call

72ED JRCmLoadModBad

Invalid Dynamic Exit load module name specified in the Config IOCTL parameters.

Action: Verify the load module name and reissue the socket call.

72EE JRUWCONotFound

Cache Manager has not been configured for this server socket.

Action: Verify the specified socket descriptor and reissue the socket call

72EF JRUWCOStorageFailed

Cache Manager encountered storage shortage.

Action: See your IBM service representative

72F0 JRUWCTStorageFailed

Cache Manager encountered storage shortage.

Action: See your IBM service representative

72F1 JRUWHTStorageFailed

Cache Manager encountered storage shortage.

Action: See your IBM service representative

72F2 JRUWCTFull

Cache Manager table has been filled.

Action: Reconfigure the Cache Manager for this server socket or reissue the socket call later

72F3 JRCmNoObjects

Maximum number of objects has been reached.

Action: Reconfigure the Cache Manager for this server socket or reissue the socket call later

72F4 JRCmDisable

Cache Manager is not allowed for this TCP/IP stack.

Action: See your IBM service representative

72F5 JRCmLSocKBadState

Cache Manager Server is not in the LISTEN state.

Action: Try the request later.

72F6 JRCmDestroyFailure

Cache Manager Storage cannot be removed.

Action: See your IBM service representative

72F7 JRCmBadConfigData

Cache Manager cannot call the DGW exits.

Action: See your IBM service representative

72F8 JRCmCacheObjLimit

Cache Manager maximum number of objects has been reached.

Action: Delete unused objects and retry the request later

72F9 JRCmCacheSpaceLimit

Cache Manager Buffer is filled.

Action: Delete unused objects and retry the request later

72FA JRCmCacheObjNotFound

Cache Manager Object is not found.

Action: See your IBM service representative

72FB JRDynAddCxFailure

Cannot add new connection to Dynnamic exits.

Action: See your IBM service representative

72FC JRDynDelCxFailure

Cannot delete a connection from Dynnamic exits.

Action: See your IBM service representative

72FD JRDynTimerFailure

Cannot start the timer from Dynnamic exits.

Action: See your IBM service representative

72FE JRDynRecoveryFailure

Cannot start the recovery from Dynnamic exits.

Action: See your IBM service representative

72FF JrCmIOVPNotValid

Invalid IOV buffer passed in the load request.

Action: Validate the IOV buffer and retry the request

7300 JrCmLogFull

LogBuffer is Full.

Action: Increase Maximum Log Buffer Size and retry the request

7301 JRCmsgDataInvalid

cmsghdr data has an incorrect value.

Action: Supply valid cmsghdr data.

7302 JrDVIPAAlreadyActive

The Dynamic VIPA activated via IOCTL was already active.

Action: Ensure the correct IP address was selected. No action is required if the IP address was correct.

7303 JrDVIPANotInVIPARange

The Dynamic VIPA was not in any defined VIPARange.

Action: Ensure the correct IP address was selected, or configure the receiving TCP/IP with an appropriate VIPARange containing the desired Dynamic VIPA

7304 JrDVIPAConflictDVIPA

The Dynamic VIPA selected is already defined via VIPADEFine or VIPABackup.

Action: Select another IP address and try again.

7305 JrDVIPAConflictIPAddr

The Dynamic VIPA selected is already active as a standard IP address.

Action: Select another IP address and try again.

7306 JrTooManyDVIPAs

The maximum allowed number of DVIPAs is already defined.

Action: Delete one or more DVIPAs from the stack and try again.

7307 JrDVIPANotDefined

The Dynamic VIPA selected for deletion was not defined here.

Action: Ensure the correct IP address was selected. No action is required if the IP address was correct.

7308 JrNoDuAvailable

TCP/IP cannot create a dispatchable unit to process the request. Either TCP/IP is not active or there is insufficient common storage available.

Action: Check if TCP/IP is active. If it is inactive, start the TCP/IP procedure. If TCP/IP is already active, the system is probably experiencing a common storage shortage. Retry the request. If the failure persists, contact the system programmer to diagnosis a common storage shortage.

7309 JRPortUnavailable

The requested port is marked reserved and is not available to any application.

Action: The requested port has been marked RESERVED with the PORT or PORTRANGE TCP/IP Configuration statement. If access is required, the configuration must be changed to remove RESERVED.

730A JRAFOpNotSupported

The operation is not supported for a socket in this address family.

Action: Change the application to not perform this operation on a socket in this address family

730B JRCannotMapSockAddr

The socket address provided by the application on this call cannot be mapped to an IPv4 socket address.

Action: Provide different user input or change the application so that the socket address specified by the application can be mapped to an IPv4 socket address.

730C JRNetAccessDenied

The user is not permitted to communicate with the specified network.

Action: If access to the specified network is required, the user must be permitted to the appropriate SAF resource

730D JRNotAuthStack

Userid is not authorized to access the TCP/IP Stack.

Action: Userid must be given read permission to resource EZB.STACKACCESS.sysname.tcpipname to access the stack successfully. sysname is the MVS system image name and tcpname is the TCP/IP jobname

730E JRNotAuthPort

Userid is not authorized to access the reserved TCP/IP Port.

Action: Userid must be given read permission to resource EZB.STACKACCESS.sysname.tcpipname.safname. safname is defined on the TCP/IP PORT or PORTRANGE statement. sysname is the MVS system image name and tcpname is the TCP/IP jobname.

730F JRFRCAReset

FRCA connection timer expired. Connection is being dropped.

Action: If the persistent timeout value is being set too low. The System Administrator can change the setting in the HTTPD.CONF file.

7310 JrNoCsaStorage

TCP/IP cannot process the request because there is insufficient common storage available.

Action: The system is probably experiencing a common storage shortage. Retry the request. If the failure persists, contact the system programmer to diagnosis a common storage shortage.

7311 JRZeroPortDVIPA

A port of zero was specified on a bind when the IP address was a distributed DVIPA and the local stack is a target stack.

Action: Specify a non-zero port on the bind().

7312 JRTCPIPAlreadyInitialized

TCPIP has already initialized.

Action: The vfs_network call for AF_INET6 was rejected because TCPIP has already initialized. TCPIP will have to be recycled to process the AF_INET6 network statement.

7313 JrIPv6NotEnabled

TCP/IP cannot process the IPv6 request because the TCP/IP stack is not currently IPv6 enabled.

Action: If IPv6 support is desired then the TCP/IP stack must be defined to UNIX System Services as being enabled for IPv6 support before the stack is started. See the IP Configuration Guide for information on how to define the stack as IPv6 enabled.

7314 JRInvalidValue

The value specified is not a valid value.

Action: An invalid value was detected by one of the following functions:
  • setsockopt() or sendmsg() function calls

The option value specified on setsockopt() or the value specified in the cmsg_data field of the ancillary data on sendmsg() is not valid. Ensure the value is within the allowable range of values. Re-issue the socket call with a valid value.

An input value is incorrect. Correct the value and invoke the request again.

7315 JRInvalidOptLength

The option length specified is not valid.

Action: The value specified for the option length is not valid. Re-issue the socket call with a valid option length.

7316 JRDefaultExceeded

The value specified exceeds the system default.

Action: One of the following has occurred for a setsockopt() or sendmsg() issued by a non-authorized application : - The IPV6_UNICAST_HOPS socket option was specified with an option value that exceeds the system defined default for hop limit. - The value specified on the IPv6_HOPLIMIT ancillary data object, for a unicast packet, exceeds the system defined default for hop limit. The application should issue a getsockopt() to determine the system default. The application can then re-issue the socket call with a value that is less than the system defined default.

7317 JROptNotSupported

The option specified is not supported on this type of socket.

Action: Check the type of socket that was created and ensure that the option specified is valid for the socket.

7318 JROPTNAllow

The option name specified is not allowed on getsockopt().

Action: Check the option name provided. Re-issue the socket call with a option name that is valid for getsockopt().

7319 JRSockIPv6CommOnly

The user is attempting to either bind or send to an IPv4 mapped IPv6 address on an AF_INET6 socket that only supports IPv6 communications.

Action: If communication using IPv4 mapped IPv6 addresses is desired, the user should not set the IPV6_V6ONLY socket option.

731A JRSockIPv6IPv4CommError

The user is attempting to either send to an IPv4 mapped address when using an IPv6 native source address on an AF_INET6 socket or send to an IPv6 native address when using an IPv4 mapped source address on an AF_INET6 socket.

Action: The user needs to decide on using either IPv4 mapped addresses or IPv6 native addresses for both source and destination.

731B JRCmsgNotAllowed

The ancillary data object provided on sendmsg() is not allowed on this type of socket.

Action: Remove the ancillary data object and re-issue the sendmsg().

731C JRCmsgHdrInvalid

The information in the ancillary data object header, CMSGHDR, is not valid.

Action: Correct the information in the header and re-issue sendmsg().

731D JRPktInfo

An error was found with the information in the in6_pktinfo structure or in the in_pktinfo structure provided on setsockopt() or sendmsg().

Action: One of the following errors occurred: - The interface specified by ipi6_ifindex or ipi_ifindex does not exist. - ipi6_ifindex or ipi_ifindex specifies an interface but the address specified in field ipi6_addr or in field ipi_addr is not available for use on that interface. - No route to the destination exists over the interface specified by ipi6_ifindex or ipi_ifindex. Correct the information and re-issue the socket call.

731E JRInvalidAddr

The address specified is not a valid IPv6 Multicast address.

Action: Re-issue the socket call with a valid IPv6 Multicast address.

731F JRConnectBadSockAddr

An invalid socket address structure was specified on connect().

Action: Verify that all fields of the socket address structure are properly initialized.

7320 JRSockIPv6InvalidScopeId

A non-zero scope value was determined to be incorrect.

Action: A non-zero scope value was determined to be incorrect for one of the following reasons: - It was specified with an IP address which was not an IPv6 link-local address. - The IPv6 link-local address is not active on the interface identified by the scope. - An IPv6 interface was not found for the specified scope value. - The scope value specified with a source IP address does not match the scope of the destination IP address for a connected socket. - The Cinet Transport Index portion of the Scope_Id, the upper half word, does not match the target stack chosen by Stack Affinity or by the Transport Name supplied on BPX1PCT(PC#IsSrcAddr). Verify that the scope value has been specified with the correct IPv6 link-local address, and that the IPv6 interface associated with the scope value is still active.

7321 JRSockAddrLenInvalid

The length provided for the AF_INET6 socket address structure is not valid.

Action: Re-issue the socket call with a valid length for the AF_INET6 socket address structure.

7322 JRNOSYSPLEXPORT

A sysplex wide port is not available for this source DRVIPA.

Action: Wait a period of time and attempt the function call again

7323 JRINUSESYSPLEXPORT

The port specified is already in use.

Action: Either select another port or wait a period of time and attempt the function call again.

7324 JRNotAuthFRCA

Userid is not authorized to access the TCP/IP FRCA service.

Action: Userid must be given read permission to resource EZB.FRCAACCESS.sysname.tcpipname to access the stack successfully. sysname is the MVS system image name and tcpname is the TCP/IP jobname

7325 JrSocketNoPeer

Socket is not connected and a datagram has not been successfully received (UDP/RAW).

Action: Either establish a connection with the peer or if socket call was issued on a UDP or RAW socket, issue a a recvfrom() or recvmsg() to receive a datagram /*

7326 JRV6CKSUMOFFSET

The user is attempting set the socket option IPPROTO_IPV6 IPV6_CHECKSUM with an odd value for the checksum offset.

Action: Checksum values must be stored on an even boundary. The RAW user application must be changed specify an even offset when issuing this socket option. The protocol header must be changed to have the checksum field at an even offset from the start of the header.

7327 JRIPV6HOPLIMEXCEEDED

TCP/IP has been configured with a maximum IPv6 Hop Limit of zero, which disallows any IPv6 packets from leaving the node.

Action: The system administrator has set the IPv6 Hop Limit to zero (on the TCP/IP IPCONFIG6 statement). This disallows IPv6 communication with remote nodes, allowing IPv6 communication only among IPv6 applications running locally, on the same Z/OS node. Authorized applications can use one of the Hop Limit-related SetSockOpts to override the configured Hop Limit value.

7328 JRSOCKADDRPROVIDED

The sockaddr provided for a send operation on a connectionless socket is different from the sockaddr provided on the connect.

Action: Re-issue the socket call without a sockaddr.

7329 JRSPCFError

Unable to associate the sysplexports distributed DVIPA with the EZBEPORT structure.

Action: Display the contents of the EZBEPORT structure to determine if there are any available lists.

732A JRIPV6ProtocolNotAllowed

An IPV6 next header ID for an extension header cannot be specified as a socket protocol for an AF_INET6 socket.

Action: Re-issue the socket call with a valid protocol.

732B JRProtocolInvalid

The protocol provided for a Raw socket is outside the allowable range.

Action: Re-issue the socket call with a valid protocol.

732C JRIOFailure

Error status reported by the device driver as a result of an attempt to perform I/O.

Action: Retry may be possible unless the device has been inactivated or taken offline, in which case re-establish connectivity with the device.

732D JRSDQuiesce

An attempt was made to bind to a distributed SYSPLEXPORTS DVIPA in Quiescing state.

Action: Bind to a different address or configure the local stack to be a target again.

732E JRIPSecNotAvail

IP Security is not enabled on this stack.

Action: Restart TCPIP specifying IPSECURITY on the IPCONFIG statement.

732F JRNotAuthIPsec

Userid is not authorized to issue the ipsec command.

Action: Userid must be given read permission to resource EZB.IPSECCMD.sysname.tcpipname.DISPLAY or EZB.IPSECCMD.sysname.tcpipname.CONTROL. sysname is the MVS system image name and tcpname is the TCP/IP jobname.

7330 JRSockOptAccessDenied

Userid is not authorized to the socket option.

Action: Userid must be given read permission to resource EZB.SOCKOPT.sysname.tcpipname.optionname to use it successfully. sysname is the MVS system image name, tcpipname is the TCP/IP jobname and optionname is the option passed (eg: SO_BROADCAST)

7331 JrDVIPAInterfaceAlreadyDefined

The Dynamic VIPA interface has already been defined via VIPADEFine or VIPABackup.

Action: Correct the VIPARANGE statement.

7332 JRNotSpDrVipa

An attempt was made to listen on a socket that is bound to a sysplex distributed DVIPA that is not using SYSPLEXPORTS, and a non-sysplex distributed port that was not user-specified.

Action: Bind the socket to this DVIPA and a sysplex distributed or user-specified port, or reconfigure the distributed DVIPA to use SYSPLEXPORTS

7333 JRRtDestOnLocalHost

Specified route destination is a local address of a non-DVIPA interface.

Action: Specify a valid route destination.

7334 JRInvalidSRCIPAddr

The source IP address that was defined by SRCIP is invalid.

Action: Correct the SRCIP configuration statement.

7335 JrSRCIPIntNotDefined

The interface name specified on a SRCIP configuration statement does not match any interface name defined on the local system.

Action: Correct the SRCIP configuration statement to specify a valid interface name.

7336 JrSRCIPIntNoRoute

The interface specified on a SRCIP configuration statement cannot be used as no route to the destination address exists.

Action: Correct the SRCIP configuration statement to specify an interface that has a route to the destination address.

7337 JrConnDeniedPolicy

A TCP connection request was denied due to policy.

Action: Compare the connection request information against the policy to determine why the request was denied.

7338 JrNextHop

The IPV6_NEXTHOP address is not valid.

Action: Check the next hop address to see if it is valid. A direct route must exist to the address and it cannot be a multicast address.

7339 JrRoutingHeader

An error occurred while processing the routing header on an IPV6_RTHDR socket option.

Action: Ensure that none of the addresses are multicast addresses.

733A JrRtHdrTooLong

More than eight routing headers were specified.

Action: Limit the number of routing headers on the socket option to eight or less.

733B JrTtlsDecryptionFailed

AT-TLS was unable to decrypt data received on a TCP connection.

Action: Review message EZD1286I for more information about the error.

733C JrTtlsEncryptionFailed

AT-TLS was unable to encrypt data to be sent on a TCP connection.

Action: Review message EZD1286I for more information about the error.

733D JrTtlsHandshakeFailed

AT-TLS was unable to successfully negotiate a secure TCP connection with the remote end.

Action: Review message EZD1286I for more information about the error.

733E JrTtlsControlDataFailed

AT-TLS was unable to process secure control data received over a TCP connection from the remote partner.

Action: Review message EZD1286I for more information about the error.

733F JrTtlsResetSessionFailed

AT-TLS received an error resetting the session ID for the secure connection.

Action: Review message EZD1286I for more information about the error.

7340 JrTtlsResetCipherFailed

AT-TLS received an error attempting to generate new session keys for a secure connection.

Action: Review message EZD1286I for more information about the error.

7341 JrTtlsAbendRecovery

An abend occurred in AT-TLS causing the secure connection to be reset.

Action: Review the system log for more information about the abend.

7342 JrTtlsGroupDeleted

AT-TLS reset a TCP connection because the group the connection was mapped to has been deleted.

Action: A connection was received while the TTLSGroupAction was being deleted. Retry the connection.

7343 JrTtlsClearTxtReceived

AT-TLS received clear text data when secure data was expected.

Action: Enable the remote application for secure connections. Retry the connection.

7344 JrPortNonZero

The port value is required to be zero.

Action: Check the value specifed for port. The port value is required to be zero for this operation.

7345 JrPortZero

The port value is required to be nonzero.

Action: Check the value specified for port. The port value cannot be zero for this operation.

7346 JRSockIPv6OnlyOption

The user is attempting to use an IPv4 mapped IPv6 address with an IPv6 only socket option.

Action: If communication using IPv4 mapped IPv6 addresses is desired, the user should not set the IPV6_V6ONLY socket option. If an IPv6 socket option that does not support IPv4 mapped IPv6 addresses is being used, a IPv4 mapped IPv6 address cannot be used.

7347 JRSRCIPDistDVIPA

The source IP address defined by a DESTINATION entry in a SRCIP configuration statement cannot be a distributed DVIPA.

Action: Correct the SRCIP configuration statement.

7348 JRDuplicateSmoAttach

The shared memory object is already attached.

Action: Correct the application to issue SIOCSMOCTL Attach requests on only one socket and only from one process thread.

7349 JRSmoNotAttached

The shared memory object is not attached.

Action: Correct the application to issue SIOCSMOCTL Detach requests only for share memory objects that have been successully attached.

734A JRIARV64Error

IARV64 encountered an error.

Action: Use the return and reason code values returned by the following functions to determine the cause of the error:
  • The SIOCSMOCTL ioctl function call.
  • The z/OS Communications Server Real-time application-controlled TCP/IP trace NMI request.
734B JrNoRouteTable

Specified route table does not exist on the TCP/IP stack.

Action: Specify a valid route table.

734C JrExpBndPortRangeConflict

An explict bind to a port within the active EXPLICITBINDPORTRANGE is not allowed.

Action: Specify a port that is not within the active EXPLICITBINDPORTRANGE or ask the system programmer or system administrator to change the range specified by GLOBALCONFIG EXPLICITBINDPORTRANGE.

734D JRMCPairNotFound

The specified multicast group and interface pair ARE NOT FOUND.

Action: Specify correct multicast group or interface.

734E JRMCMixedOpt

The specified multicast option is mixed of any-source, source-specific or full-state APIs.

Action: Sockets do not allow mix IPv4 protocol with protocol independent group membership APIs and within each API type may not mix delta based with full state options. Correct the usage of API type.

734F JRMCMaxSrcFlt

The maximum number of source addresses per group and interface pair has been exceeded.

Action: Remove source addresses that are no longer needed.

7350 JRMCDupSrcFlt

The same source address is already in the group and interface.

Action: Verify the address being used. Correct it and re-issue API command.

7351 JRMCEmptySrcIncMode

The empty source list can not be specified for mode INCLUDE when the multicast group is not yet defined.

Action: VERIFY THAT THE FILTER MODE IS CORRECT OR add source addresses with this API command.

7352 JRMCModeInvalid

The filter mode specified for multicast source fuction when the multicast group is not yet defined.

Action: Correct the filter mode. Only MCAST_INCLUDE and MCAST_EXCLUDE ARE ALLOWED.

7353 JRMCGetSrcInvalid

THE MULTICAST GROUP AND INTERFACE ARE NOT YET DEFINED for get source filter function.

Action: Specify correct multicast group or interface.

7354 JRMCSrcAddrInvalid

The specified source address is not valid.

Action: Specify correct source address.

7355 JRCmMultipleCaches

Cache Manager cannot be configured for both a shared and an exclusive cache.

Action: Reconfigure the Cache Manager for this server socket or reissue the socket call later

7356 JRCmChangeCacheType

Cache Manager cannot be reconfigured for a different type of cache.

Action: Reconfigure the Cache Manager for this server socket or reissue the socket call later

7357 JRUWSXStorageFailed

Cache Manager encountered storage shortage.

Action: See your IBM service representative

7358 JRCmBadCacheType

Cache type specified on request does not match the configured cache type.

Action: Reconfigure the Cache Manager for this server socket or reissue the socket call later

7359 JRDVQuiesce

An attempt was made to bind to a distributed DVIPA in Quiescing state.

Action: Bind to a different ip address or configure the local stack to be a target again.

735A JrUnRsvdPortDenied

Application does not have PORT statement UNRSV authority to access a port that is not reserved by a PORT or PORTRANGE profile statement.

Action: Job must be given permission by a PORT statement in the TCP/IP profile. Either create a port reservation allowing the application access to the requested port, or create a PORT UNRSV definition allowing the job to access unreserved ports.

735B JrNotAuthUnRsvdPort

Userid was refused SAF authorization to access a port that is not reserved by a PORT or PORTRANGE profile statement.

Action: Either define a PORT reservation statement allowing the application to access the specified port, or the userid must be given read permission to resource EZB.PORTACCESS.sysname.tcpipname.safname. safname is defined on the TCP/IP PORT UNRSV statement. sysname is the MVS system image name and tcpname is the TCP/IP jobname.

735C JrUnRsvdTCPPortConflict

WHENBIND and WHENLISTEN cannot be specified concurrently by PORT UNRSV TCP profile statements.

Action: Verify the access control (WHENBIND or WHENLISTEN) to be used for TCP. To change the access control, delete and reconfigure all existing PORT UNRSV TCP profile statements.

735D JrNoCritSocks

No critical sockets are available to satisfy the request.

Action: Application is trying to use an unsupported function, please contact IBM Service.

735E JrNoPartnerInfo

No partner information is returned for the request.

Action: Verify if the correct socket descriptor has been used for the request, or that both end points of the connection does not reside in the same image or in the same sysplex.

735F JrInValidTCPIPStack

The application tried to use a function which is not supported by this TCPIP stack.

Action: Make sure that the correct level of TCPIP stack is used.

7360 JrNotSameSecDomain

Both end points of the connection does not reside in the same security domain.

Action: Make sure that both end points of the connection reside in the same security domain. May need to invoke the SERVAUTH to define the security domain.

7361 JrNoSecDomain

The socket call fails because the security domain name for the profile in the SERVAUTH class is not defined.

Action: Make sure to define the security domain name for the profile in the SERVAUTH class.

7362 JrNoSuspend

The socket call fails because the socket call is issued in no-suspend mode and there is no information available to be returned.

Action: The application may want to issue the socket call with a timeout value to suspend the socket call to retrieve the information.

7363 JRSockIPv6InvalidScopeIdZero

A zero scope id is not valid for use with the scope of this address.

Action: The socket function requires a non-zero scope id in the sockaddr structure. The if_nameindex function can be used to obtain interface indices for use as scope ids for link-local IPv6 addresses.

7364 JROSMAccessDenied

The user is not permitted to communicate over OSM interfaces.

Action: If access to the intranode management network over OSM interfaces is required, the user must be permitted to the appropriate SAF resource.

7365 JRDisabled

The function is currently disabled.

Action: Determine why the function is disabled and then retry the request.

7366 JRCallerMismatch

The authorization of the current caller of the request does not match that of the caller that initialized the function.

Action: Retry the request from a caller with the correct authorization. This error may be returned for the following reasons:
  • z/OS CS Real-time application-controlled TCP/IP trace NMI:
    • For all requests except RCCGetRecords, the task, address space (ASID), or user ID of the caller of the request does not match that of the caller of the RCCOpen request.
    • For the RCCGetRecords request, the address space (ASID) or user ID of the caller of the request does not match that of the caller of the RCCOpen request.
7367 JRTooManyInstances

The maximum number of function instances is already open.

Action: Retry the request later. This error may be returned for the following reasons:
  • z/OS CS Real-time application-controlled TCP/IP trace NMI:
    • An RCCOpen request was received, but the maximum number of trace instances is already open.
7368 JROutOfSequence

The current request does not follow the correct request sequence for the function.

Action: Retry the requests in the correct sequence. This error may be returned for the following reasons:
  • z/OS CS Real-time application-controlled TCP/IP trace NMI:
    • An RCCSetFilters request was received but the trace instance is still active. Invoke the RCCStop request to stop the trace before invoking the RCCSetFilters request.
    • An RCCStart request was received but either no filters have been specified for the trace instance, or the trace instance is already active.
    • An RCCStop request was received for a trace instance where a trace is not currently active.
7369 JRTcpGlobalStall

The TCP connection has been reset due to a global stall.

Action: Determine why the global stall occurred and then restart the connection.

736A JRTcpQueueSize

The TCP connection has been reset due to a queue size problem.

Action: Determine why the queue size problem occurred and then restart the connection.

736B JRSrcIPInvalidForExternalDest

The TCP connect source IP address is not valid because the non-z/OS external target for the GRE or ENCAP Distributed VIPA does not have a route back to this address. It will not be able to return the syn ack to the client.

Action: The client application should use a source IP address that is routable by the non-z/OS external target of the GRE or ENCAP Distributed DVIPA. If the client application bind is to inaddr_any or it uses an implicit bind, you can use the SRCIP statement to select an appropriate source IP address for the application.

736C JRTTLSStopReadDataPending

The AT-TLS SIOCTTLSCTL TTLSi_Stop_Connection ioctl request can not complete because all of the decrypted data was not read from the socket. All application data received over the secure connection must be read prior to the security stopping on the connection.

Action: The application should read any outstanding data on the connection. Then the SIOCTTLSCTL TTLSi_Stop_Connection ioctl can be used to stop the security on the connection.

736D JRTTLSStopWriteDataPending

The AT-TLS SIOCTTLSCTL TTLSi_Stop_Connection ioctl request can not complete because application write data is pending to be encrypted on the connection. All application write requests must be completed prior to the security stopping on the connection.

Action: The application should wait for any outstanding write requests to complete on the connection. Then the SIOCTTLSCTL TTLSi_Stop_Connection ioctl can be used to stop the security on the connection.

736E JRInvalidFilter

The filter identifier is wrong or the filter specified is not valid for obtaining FTP daemon configuration. The filter only supports the address space id (ASID) item.

Action: Retry the GetFTPDaemonConfig request, providing one filter that specifies only the ASID that identifies the specific FTP daemon.