550 reply codes
- 550: Allocation for remote destination failed.
- 550: Allocation of dsname failed while executing command command.
- 550: Allocation of dsname failed while executing cmd command.
- 550: Allocation of data_set failed: (rc=rc, err=err, info=info)
- 550: Allocation of temporary data set failed: (rc=rc, err=err, info=info)
- 550-: anonymous login rejected by FTP server
- 550 : command command fails: message_prefix reason (errno2 = errno2)
- 550: command command fails - unable to create named pipe pathname
- 550: command command into pathname not supported when UNIXFILETYPE is FIFO
- 550: Cannot create unique data set name for store unique of dsname.
- 550: Cannot create unique file name for store unique of filename.
- 550: Cannot create unique member name for append to dsname
- 550: Cannot create unique member name for store unique of dsname
- 550: cannot determine characteristics of pathname
- 550: Cannot rename from partitioned data set dsname to a different partitioned data set dsname.
- 550: closing control connection
- 550: cmd cmd failed : error
- 550: cmd cmd failed. No files found.
- 550: cmd command failed - popen error: error
- 550: cmd failed. Unknown HOME directory
- 550: cmd fails: dsname. User not authorized.
- 550: cmd fails: filename is a directory and is not empty.
- 550: cmd fails: pathname is a directory.
- 550: cmd fails: pathname is not a directory.
- 550: Command command fails: access to resource is denied by server.
- 550: Command cmd failed - pipe error: error
- 550: command cmd fails: filename does not exist
- 550: Command cmd fails: filename is a character special file.
- 550: Command cmd fails: filename is an unknown type.
- 550: Command cmd fails: filename is a directory.
- 550: Command cmd fails: filename is a pipe or FIFO.
- 550: command command fails: filetype is file type
- 550: Command cmd fails - name is of an unsupported type
- 550: command command fails - pathname must be an MVS directory
- 550 : command command fails: pathname - user is not authorized
- 550: command command is not available for pathname
- 550: command command is not supported for mode mode
- 550: command command is not supported for structure structure
- 550: command command is not supported for type type
- 550-: command command rejected - file transferred while SBSENDEOL not CRLF
- 550: command fails: dsname. User not authorized
- 550: command fails: pathname. User not authorized
- 550: command SIZE is not supported for the current data connection translate table when type is type
- 550: command SIZE rejected - pathname contains CR characters
- 550: command SIZE rejected - pathname is not an z/OS UNIX file
- 550: Command terminated due to CPU time limit exceeded
- 550: command terminated due to server shutdown in progress
- 550: could not delete dataset
- 550: Data set dsname is migrated and NoAutoRecall is specified.
- 550: Data set dsname not found
- 550: “directory” data set does not exist.
- 550: dsname is a partitioned data set and no member was specified on the cmd command.
- 550: dsname is a physical sequential data set and a member was specified on the command.
- 550: dsname is not on a direct access volume. It may not be deleted.
- 550: dsname is not on a direct access volume. It may not be renamed.
- 550: dsname used exclusively by someone else.
- 550: DELE fails: dsname does not exist.
- 550: DELE fails: dsname. User not authorized.
- 550: directory remains “file_name”.
- 550: DSORG=DA requires structure: FILE, mode: STREAM, and transfer type: IMAGE.
- 550: error allocating new_directory
- 550: Error allocating storage for type
- 550: Error allocating tape data set dsname
- 550: Error deleting migrated data set dsname
- 550-: error initializing FTP server
- 550: Error mounting volume containing data set dsname
- 550: Error opening data_set_name
- 550: error reading PDS directory
- 550: Error recalling data set data_set
- 550: Error recalling data set data_set (rc=rc)
- 550: File filename not found.
- 550: file_name requests a nonexistent partitioned data set. Use MKD command to create it.
- 550-: GSSAPI error major status code: value - text
- 550-: GSSAPI error minor status code: value - text
- 550: Index number is greater than number of spool files for jobid
- 550: internal error processing command command
- 550-: Internal error processing function SSOBRETN=rc.
- 550: Invalid cancel request
- 550: Invalid jobname/Jobid combination
- 550: JES cannot find output for jobid
- 550: JES cannot find output for jobid, JesPutGet aborted
- 550: JES internal reader allocation failed
- 550: JES internal reader open failed
- 550: JES is unable to provide spool data set name now
- 550: JES is unable to provide spool data set name now, JesPutGet aborted
- 550: JES spool file allocation failed for dsname
- 550: JES spool file open failed for dsname
- 550: JESPUT failed, could not allocate receive buffer
- 550: JesPutGet aborted
- 550: JesPutGet aborted, internal error
- 550: JesPutGet aborted, job not found
- 550: JesPutGet aborted, timeout exceeded
- 550: JesPutGet terminated
- 550: Job name not found
- 550: Job not cancelled, duplicate jobnames and no Jobid
- 550: Job not cancelled, job on output queue
- 550: Jobid jobid not found
- 550: Jobid jobid not found for JESJOBNAME=name, JESSTATUS=status and JESOWNER=owner
- 550: Jobid with invalid syntax for subsystem
- 550: Mismatched quotes on pathname pathname
- 550: MKD failed. Dcbdsn data set dcbdsn_name does not exist.
- 550: MKD failed. Dcbdsn data set dcbdsn_name is not on a direct access volume.
- 550: MKD failed. Dcbdsn data set dcbdsn_name is a VSAM data set.
- 550: MKD failed. Dcbdsn data set dcbdsn_name has an invalid dsorg.
- 550: MKD failed. Dcbdsn data set dcbdsn_name has a recfm of recfm which is invalid for a PDS.
- 550: MKD failed. Dcbdsn data set dcbdsn_name is migrated and noautorecall is specified.
- 550: MKD failed. Error locating dcbdsn data set dcbdsn_name.
- 550: MKD failed. Unit=unit_name invalid for PDS.
- 550: MKD failed. Volume for dcbdsn data set dcbdsn_name is not mounted and NoAutomount is specified.
- 550: MKD failed. Volume list volume serial list includes a volume which is not mounted and NoAutoMount is specified.
- 550: MKD failed. Volume volume is not mounted and NoAutoMount is specified.
- 550: MKD failed. Volume=serial is a tape and is invalid for a PDS.
- 550: MKD failed. Volume=volume serial list includes a tape and is not valid for a PDS.
- 550: MKD failed. Error mounting dcbdsn data set dcbdsn_name.
- 550: MKD failed. Error retrieving dcbdsn data set dcbdsn_name.
- 550: MKD failed. Recfm recfm is invalid for a PDS.
- 550: Mkd fails: new_directory. User not authorized
- 550: MKDIR failed: error
- 550: Name length error for pathname pathname
- 550: No data sets found.
- 550: No jobs found for JESJOBNAME=name, JESSTATUS=status and JESOWNER=owner
- 550: No members found.
- 550: No spool files available for jobid
- 550: No spool files available for jobid, JesPutGet aborted
- 550: Non-DASD data set dsname cannot be processed.
- 550: Open of dsname failed.
- 550: Partitioned data set ‘pathname’ does not exist
- 550: Pathname does not contain valid Jobid
- 550: pathname pathname not retrievable.
- 550: Permanent negative completion.
- 550: READTAPEFormat value is value but input tape is format
- 550: READTAPEFormat value is value but input tape is format format
- 550: READTAPEFormat value is value but input tape is not spanned.
- 550: READTAPEFormat value is value but input tape is spanned
- 550: Rename fails: dsname already exists.
- 550: Rename fails: GDG name conversion failed.
- 550: Renaming attempt failed. Rc was errno
- 550: Request nonexistent member file_name to be sent.
- 550: request size of nonexistent member member
- 550-: Request to export security context failed
- 550: Retrieval of a whole partitioned data set is not supported. Use MGET or MVSGET for this purpose.
- 550: RMD failed. Valid only for z/OS UNIX files or partitioned data sets.
- 550: Rmd fails: directory. User not authorized
- 550: RMDIR failed: error
- 550: RNFR fails: dsname does not exist.
- 550: RNFR fails: dsname. User not authorized.
- 550: RNTO fails: dsname. User not authorized.
- 550 : SIZE command not supported with active security mechanism
- 550: Size of a whole Partitioned data set is not supported
- 550: SIZE fails: file name is migrated
- 550: SIZE fails: filename is on a volume which is not mounted
- 550: SQL query not available. Can't load CAF routines.
- 550-: SVC99 RETURN CODE=rc S99INFO=info S99ERROR=decerr HEX=hexerr S99ERSN code code.
- 550-: System completion code and reason: code-reason
- 550: TAPEREADSTREAM does not support transfer of an American Standards Association (ASA) data set
- 550: TAPEREADSTREAM does not support transfer of the trailing blanks in a fixed format tape data set
- 550: The user is not authorized to access the job
- 550: Transfer aborted
- 550: TYPE U transfer requires variable format data set
- 550: Unable to append to dsname
- 550: Unable to append to fixed record format file in image mode
- 550: Unable to append to member name in Partitioned data set dsname
- 550: Unable to append to the Null directory.
- 550: Unable to create data set dsname for command command.
- 550: Unable to delete directory (Error code: error_code, Reason code: reason_code, S99ERSN code s99reason_code).
- 550: Unable to delete dsname (Rc = errno).
- 550: Unable to obtain data set list
- 550-: Unable to obtain JES NODE name from subsystem information
- 550: Unable to perform LIST/NLST command due to error with /dev/null.
- 550: Unable to send dsname
- 550: Unable to size dsname
- 550: Unable to store dsname
- 550: Unable to store member name in Partitioned data set dsname
- 550: Unable to store unique dsname
- 550: Unable to store unique member name in Partitioned data set dsname
- 550: Unexpected status for dsname
- 550: Unknown HOME directory for pathname path
- 550: Unknown return code from Get JES spool request: number
- 550: Unknown return code from Get JES spool request: number, JesPutGet aborted
- 550: Unknown return code from JES cancel request
- 550: User Exit refuses this Job to be submitted by dsname
- 550: Volume containing dsname is not mounted and NoAutoMount specified.
- 550-: volume for “new_directory” is not mounted and NoAutomount is specified
- 550: Volume is not ready and automatic tape mounts are not allowed.
- 550: Volume name is not mounted and NoAutoMount is specified.
- 550: Volume=volume list includes a volume which is is not mounted and NoAutoMount is specified.
- 550: VSAM data set dsname cannot be processed.
Parent topic: FTPD reply codes