POWER7 information

Verifying AIX software installation

Use this procedure to verify that the device driver for the adapter is installed.

If necessary, log in as root user.
At the command line, type: lslpp -l devices.pci.1410cf02.rte
Press Enter. Possible results are as follows:
- If the 1 Gigabit-SX iSCSI TOE PCI-X Adapter device driver is installed, the following is an example of the data that displays on your screen:
  Fileset Level State Description
  
  Path: /usr/lib/objrepos devices.pci.1410cf02.rte 5.3.0.0 COMMITTED 1000 Base-SX PCI-X iSCSI TOE Adapter Device Software
  
  Verify that the devices.pci.1410cf02.rte filesets are installed at the AIX® 5.2.0 or later level. If this information displays but you continue to have problems, go to Installing the IBM 1 Gigabit iSCSI TOE PCI-X Adapter.
- If no data displays on your screen, the 1 Gigabit-SX iSCSI TOE PCI-X Adapter device driver did not install correctly. Return to Installing the device driver software for the 1 Gigabit-SX iSCSI TOE PCI-X Adapter. If you continue to experience problems, it may be necessary to call your system support organization. Refer to your operating system documentation for instructions.

Send feedback Rate this page

Last updated: Wed, January 17, 2018