Describes resource status from packaging and logical displays.
From packaging displays
Resource status information
is available only on the Logical Hardware Resources displays. To access status
information from the Packaging displays, select the Associated
logical resource(s) option. For details, see Display associated resources.
From logical displays
The status of each logical
hardware resource is shown next to the description, type, and model information
on various Logical Hardware Resources displays. You can also select the Display
detail option to view the resource status. For details, see Display resource details. This indicates the current
status of the resource as reported by the hardware.
Status values:
- Unknown
- Cannot determine status. The resource may be non-reporting or unable to
communicate status.
- Operational
- Resource is functioning normally.
- Failed
- Resource has failed and is not functional.
- Errors
- Card or device has detected errors but may still be functional.
- Not Connected
- Functional connection to the card or device has been closed or has failed.
For bus resources, this condition indicates that wrap plugs are installed.
- Degraded
- Optical bus conditions indicating that the redundant path is being used.
- Powered Off
- Resource has been powered off or no power is being supplied to the unit.
- Disabled
- Resource has been reset or suspended. This is an I/O processor status
to indicate that the IOP is disabled except for bus level service or maintenance
(I/O debug functions). To recover from disabled status, perform another IPL
on the IOP. For details, see Debug the resource or How to reset an I/O processor card while the system is running.
- Software Error
- System licensed internal code associated with this hardware resource has
incurred a program exception.
Subscribe to this information