This content covers the 9111-285, 9131-52A, 9405-520, 9406-520, 9111-520, 9407-515, and 9406-525 models.

| Index number | Part number | Units | Description |
|---|---|---|---|
| 1 | 97P5037* |
1 | Front cover assembly (IBM® eServer™ i5) |
97P6149* |
1 | Front cover assembly (IBM eServer p5) | |
| 1 | 39J4799* |
1 | Bezel assembly |
| 2 | 04N6587* |
2 | Thumbscrew, front cover mounting |
| 3 | 97P5895** |
1 | Rack handle assembly, left |
| 4 | 09P3744* |
2 | Screw |
| 5 | 39J4799* |
1 | Cover, top access |
| 6 | 39J5301* |
AR | Rail kit |
| 6a | 39J5310* |
AR | Rack latch (included in rail kit) 39J5590 - Right drawer latch |
| 6b | 04N6587* |
AR | Screw (included in rail kit) |
| 6c | 74F1823* |
AR | Nut clip (included in rail kit) |
| 7 | NONUM | 1 | Cable management arm assembly |
| 8 | 97P5896** |
1 | Rack handle assembly, right |
| 9 | 09P3744* |
2 | Screw |
* Designed to comply with RoHS requirement
** Not designed to comply with RoHS requirement

| Index number | Part number | Units | Description |
|---|---|---|---|
| 1 | 97P4178* |
AR | Disk unit bezel |
| 2 | See Disk unit parts | AR | Disk unit assembly |
| 3 | 97P4179* |
AR | Disk unit filler assembly |
| 4 | 39J1004* |
1 | RAID enablement filler |
| 5 | See Storage parts | 1 | RAID enablement card assembly |
| 6 | 39J1002* |
1 | Media device filler |
| 7 | 33G3907* |
4 | Screw |
| 8 | See Part number catalog | 1 | Media device |
| 9 | 33G3907* |
4 | Screw |
| 10 | See Backplane parts | 1 | Media backplane and enclosure assembly (IBM eServer i5) |
| See Backplane parts | 1 | Media backplane and enclosure assembly (IBM eServer p5) | |
| 11 | See Control panel parts | 1 | Control panel assembly |
71P8467** |
1 | Power button shield | |
| 12 | 53P5867* |
1 | Media device filler |
| 13 | See Removable media device parts | AR | Media device |
* Designed to comply with RoHS requirement
** Not designed to comply with RoHS requirement


| Index number | Part number | Units | Description |
|---|---|---|---|
| 14 | 39J5800* |
1 | Fan tray assembly. When the fan tray assembly is replaced, fan cover LED label (97P4479) must also be ordered. If the fan tray cable assembly needs to be replaced, order 42R4061. To replace all three parts, order all three part numbers. |
| 15 | 39J2473* |
3 | Fan assembly |
| 16 | 53P5869* |
2 | PCI divider assembly, long. Use for slots 5 and 6 |
| 17 | 53P2728* |
2 | PCI divider. Use for slot 4 |
| 17 | 53P2729* |
2 | PCI divider. Use for slot 4 |
| 18 | See System parts | AR | PCI adapter assembly |
| 19 | 01R1473* |
AR | PCI adapter filler |
| 20 | See Processor parts | 1 | Service processor assembly |
| 20a | 39J2923* 39J1099** |
1 | RIO/HSL card |
| 21 | See Power parts | AR | Power supply assembly |
| 22 | 39J0999* |
1 | Power supply filler |
| 23 | See Backplane parts | 1 | Disk unit backplane assembly |
| 24 | See Backplane parts | 1 | Disk unit backplane assembly |
| 24 | 53P4415* |
1 | Disk unit backplane filler |
* Designed to comply with RoHS requirement
** Not designed to comply with RoHS requirement

| Index number | Part number | Units | Description |
|---|---|---|---|
| 25 | NONUM | 1 | Mounting bracket, power supply |
| 25 | 09P3744* |
7 | Screw |
| 26 | See Power parts On models without RIO/HSL-2 ports P1-T3 and P1-T4. The system backplane must be replaced for regulator problems. Check system backplane for part number. | 1 | 1.5 V or 2.5 V voltage regulator (cannot be replaced on 9111-285, 9131-52A) |
| 27 | See Power parts On models without RIO/HSL-2 ports P1-T3 and P1-T4. The system backplane must be replaced for regulator problems. Check system backplane for part number. | 1 | 2.5 V voltage regulator |
| 28 | See Memory parts | AR | Memory DIMMs |
| 29 | See Backplane parts | 1 | System backplane |
| 30 | See Power parts Replace two regulators if two are installed. | 1 or 2 | 1.2V voltage regulator |
| 31 | 28L0657* |
1 | Thumbscrew, planar mounting |
| 32 | NONUM | 1 | Mounting guide, short PCI divider |
| See VPD parts | 1 | VPD card |
* Designed to comply with RoHS requirement
** Not designed to comply with RoHS requirement

| Index number | Part number | Units | Description |
|---|---|---|---|
| 1 | 39J3672* |
1 | Cover assembly, service access |
| 2 | 97P3772* |
1 | Cover assembly, back |
| 3 | 97P3942* |
1 | Cover assembly, top |
| 4 | 97P5895** |
2 | Screw |
| 5 | 97P5284* | 1 | Acoustic Option Cover assembly, top cap. For 9131-52A, 9405-520, 9406-520, 9111-520, 9407-515 |
| 5 | 39J1204** | 1 | Cover assembly, top cap. For 9111-285, 9131-52A |
| 6 | 09P3744* |
2 | Screw |
| 7 | 39J1238* |
1 | Bracket |
| 8 | 09P3744* |
4 | Screw |
| 9 | 39J5589* |
1 | Control panel filler |
| 10 | See Control panel parts | 1 | Control panel |
71P8467** |
1 | Power button shield | |
| 11 | 97P5907* |
1 | Cover assembly, front (9131-52A, 9405-520, 9406-520, 9111-520) |
| 11 | 39J1215* |
1 | Cover, front (9111-285) |
| 12 | 39J2502* |
1 | Door assembly (9405-520, 9406-520) |
| 12 | 39J2503* |
1 | Door assembly (9111-520) |
| 12 | 39J3228* |
1 | Acoustic cover/door assembly (9131-52A) |
| 13 | 53P3949* |
1 | Tip plate |
| 14 | 09P3744* |
4 | Screw |
* Designed to comply with RoHS requirement
** Not designed to comply with RoHS requirement