Using High-Speed Link (HSL) specific options

Provides example of work with high speed Link (HSL) resources display

Note: The term High Speed Link (HSL) is interchangeable with the term Remote I/O (RIO).

You can access options for High Speed Link (HSL) resources from the High Speed Link resources option on the Logical Hardware Resources display.

Figure 1. Example Work With High Speed Link (HSL) Resources display

                 Work With High-Speed Link (HSL) Resources                      
                                                                                
 Type options, press Enter.                                                     
  1=Enable HSL OptiConnect     2=Change detail     3=Disable HSL OptiConnect    
  4=Remove      5=Display detail      8=Associated packaging resources          
  9=Resources associated with loop       12=Display port information            
                                                                                
                                                                                
                                                               HSL              
                             Resource   Hardware        Loop   OptiConnect      
Opt Description              Name       Status          Number Status           
 _  Local HSL NIC            BCC01      Operational            Disabled         
 _   HSL Loop                SB01       Operational      256   Not Available    
 _   HSL Loop                SB02       Operational      257   Enabled          
 _  Local HSL NIC            BCC02      Operational            Disabled         
 _   HSL Loop                SB03       Operational      258   Not Available    
 _   HSL Loop                SB04       Operational      259   Disabled         
 _  Local HSL NIC          ? BCC03      Unknown                Disabled         
 _   HSL Loop              ? SB05       Unknown          260   Not Available    
 _   HSL Loop              ? SB06       Unknown          261   Not Available    
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
F3=Exit    F5=Refresh    F6=Print    F8=Exclude non-reporting resources         
F10=Non-reporting resources     F12=Cancel

The Work With High Speed Link (HSL) Resources display appears when you select the High Speed Link resources option on the Logical Hardware Resources display.

The Work With High Speed Link (HSL) Resources display allows you to display information and perform functions that are specific to HSL.

The options below are unique for HSL:

Display detail: Select this option to display the details of the logical hardware resource. The information is device-dependent, meaning it might be different depending on the hardware resource selected.

Display port information: Select this option to display the physical cabling between resources within a given HSL loop.

Resources associated with loop: Select this option to display the selected loop and a list of all resources logically attached to it. If more than one loop is selected with this option, the list will contain all of these loops and their logically attached resources.