subscribe iconSubscribe to this information

Remove the front cover from the 7311-D11, 5791, or 5794 expansion unit

You might need to remove the cover to access components or perform service. Use the procedure in this section to accomplish this task.

To remove the front cover, follow these steps:

  1. Open the rack front door, if necessary.
  2. Pull in the knobs on the left and right of the front cover as shown in the following figure:Graphic of removal of the front cover on an expansion unit
  3. Pull the cover out and away from the expansion unit.
Parent topic: Remove and install the front cover on the 5791 or 5794 expansion unit
Send feedback | Rate this page

Last updated: Fri, Oct 30, 2009