0551 rack

The 0551 rack specifications provide detailed information for your rack.

Table 1. Rack specifications

Pictured is the 0551 rack

The 0551 provides an empty 1.8 m rack (36 EIA units of total space). See the plug types for specific information on the power distribution units.
0551 rack
Dimensions Width Depth Height
Metric 650 mm  1020 mm 1800 mm
English 25.5 in. 40.0 in. 71.0 in.
 
Maximum configuration weight The weight of the empty rack is 244 kg (535 lb.). Click the appropriate link to see the weight for what is installed. 0123, 0133, 0134, 0578, 0588, 0595, 0137, 0138, 9406-570 and 9117-570,0574, 0694, 7884
Electrical
Click the appropriate link to see the electrical characteristics for what is installed. 0123, 0133, 0134, 0578, 0588, 0595, 0137, 0138, 9406-570 and 9117-570,0574, 0694, 7884
Plug types and power distribution unit. Power distribution unit (PDU) option. 0123, 0133, 0134, 0578, 0588, 0595, 0137, 0138, 9406-570 and 9117-570,0574, 0694, 7884
High Speed Link (HSL) cable requirements
Temperature requirements
Operating 10 degrees to 38 degrees C (50 degrees to 100.4 degrees)
Nonoperating 1 degrees to 60 degrees C (33.8 degrees to 140 degrees F)
Environment requirements Operating Nonoperating
Noncondensing humidity 8 to 80% 8 to 80%
Wet bulb temperature 22.8 degrees C (73 degrees F) 27 degrees C (80.6 degrees F)
Maximum altitude 3048 m (10000 ft.)
Noise emissions4 Rack noise levels are a function of the number and type of drawers installed. See your server or hardware specifications for specific requirements
Service clearances
Front Back Sides2 Top2
762 mm 762 mm 762 mm 762 mm
30 in. 30 in. 30 in. 30 in.

Notes:

  1. The 1.8 meter rack has 10 EIA units of space remaining. This space will be filled with a 5 EIA filler panel, a 3 EIA filler panel, and two of the 1 EIA filler panels. Because the rack does not have power distribution, the model 830 requires a power cord of sufficient length to reach the receptacle. The power cord for model 830 must be used to determine the appropriate receptacle.
  2. Side and top clearances are optional during operation.
  3. Acoustic doors are available for the IBM® racks. Feature code 6248 is available for the 0551 and 7014-T00 racks. Feature code 6249 is available for the 0553 and 7014-T42 racks. The overall sound reduction is approximately 6 dB. The doors add 381 mm (15 in.) to the depth of the racks.
  4. For a description of noise emission values, see the Acoustics chapter of the Site Preparation and Physical Planning Guide, SA76-0103.

See 0551 or 7014 rack configurations for typical configurations when the 0551 or 7014 rack is populated with various server models.

Caster and leveler locations

The following diagram provides the caster and leveler locations for the 7014-T00, 7014-T42, 0551, and 0553 racks.

Figure 1. Caster and leveler locationsCaster and leveler locations
Parent topic: Rack specifications