If you have installed a new feature or part, verify that
the system recognizes the feature or part by using the IBM® i system service tools.
To verify the installed part, complete the following steps:
- Deactivate the failing item indicator light. For instructions,
see Deactivating the indicator light by using the IBM i operating system.
- Sign on with at least service level authority.
- On the command line of the IBM i session, type strsst and
press Enter.
Note: If you cannot get to the System Service
Tools display, use function 21 from the control panel. Alternatively,
if the system is managed by Hardware Management Console (HMC), use
the Service Focal
Point Utilities to get to the Dedicated Service Tools (DST) display.
- Type your service tools user ID and service tools password
on the System Service Tools (SST) Sign On display and press Enter.
Note: The service tools password is case-sensitive.
- Select Start a service tool from
the System Service Tools (SST) display and press Enter.
- Select Hardware service manager from
the Start a Service Tool display and press Enter.
- Select Logical hardware resources (buses, IOPs,
controllers) from the Hardware Service Manager display
and press Enter. This option allows you to display and
work with logical resources. Logical hardware resources are the functional
resources of the system used by the operating system.
With the Logical Hardware Resources display, you can show
logical hardware resource status or information, and associated packaging
hardware resources. Use the online Help information to better understand
specific functions, fields, or symbols.
