Adding a Reason Code Group

<pre> THIS RPQ IS FOR INFORMATION ONLY. DO NOT ORDER THIS RPQ. THE I/O DEVICES LISTED BELOW CAN BE ATTACHED TO THE S/390 9672 PROCESSORS LISTED IN THIS RPQ. IN THE EVENT THAT AN IBM I/O DEVICE IS NOT LISTED FOR ATTACHMENT TO THE IBM OEMI (PARALLEL) CHANNEL INTERFACE, THE FOLLOWING STATEMENT APPLIES TO ALL FUTURE MACHINE TYPES AND MODELS: -IBM DEVICES PREVIOUSLY ATTACHED TO IBM S/370 OR S/390 SYSTEMS ARE SUPPORTED FOR ATTACHMENT TO S/390 SERVER PARALLEL OR ESCON CHANNELS, UNLESS NOTED BY RPQ. THE SUBJECT I/O DEVICES MUST MEET OEMI OR ESCON ARCHITECTURE REQUIREMENTS TO BE SUPPORTED. PREREQUISITE ENGINEERING CHANGE LEVELS MAY BE REQUIRED. FOR FURTHER DETAIL, CONTACT IBM SERVICE PERSONNEL- NOTE: -IBM CANNOT CONFIRM THE ACCURACY OF PERFORMANCE, COMPATIBILITY, OR ANY CLAIMS RELATED TO NON-IBM PRODUCTS. QUESTIONS REGARDING THE CAPABILITIES OF NON-IBM PRODUCTS SHOULD BE ADDRESSED TO THE SUPPLIERS OF THESE PRODUCTS.- RESTRICTIONS AND RECOMMENDATIONS : -------------------------------- 1- NO TESTING HAS BEEN DONE ON ANY 390 PROCESSORS. THESE I/O DEVICES HAVE NOT BEEN ANNOUNCED FOR ATTACHMENT TO ANY 390 PROCESSOR. THE CUSTOMER ASSUMES ALL RESPONSIBILITY FOR ATTACHING THESE DEVICES PER THE IBM MULTIPLE SUPPLIER SYSTEMS BULLETIN. 2- CURRENT LEVEL OPERATING SYSTEMS MAY NOT WORK PROPERLY WITH THESE DEVICES. IT IS STRONGLY SUGGESTED THAT THE CUSTOMER RUN APPLICATION TEST BEFORE NORMAL PRODUCTION USE. THERE IS NO IBM SUPPORT TO PROVIDE PROGRAM FIXES IN THESE SITUATIONS IF ERRORS OCCUR. 3- THERE IS NO DIAGNOSTIC AND SERVICE AVAILABLE. 4- THE IBM MARKETING SPECIALIST IS RESPONSIBLE TO CONTACT IBM SERVICE FOR REQUESTS FOR IBM SERVICE SPECIAL BIDS IN THESE UNIQUE SITUATIONS. DEVICES SUPPORTED ----------------- 1442 CARD READER 2440 MAGNETIC TAPE SUBSYSTEM 2501 CARD READER 2540 CARD READER 2821 CONTROL UNIT 2914 CHANNEL SWITCH 3044 FIBER OPTIC CHANNEL EXTENDER 3174-01L CONTROL UNIT 3203 PRINTER 3258 CONTROL UNIT 3274 CONTROL UNIT 3420 MAG TAPE SUBSYSTEM-MUST BE ATTACHED THROUGH 3803 CONTROL UNIT 3422 MAG TAPE UNIT 3430 MAGNETIC TAPE SUBSYSTEM 3505 CARD READER 3525 CARD PUNCH * 3540 DISKETTE READER 3705 COMMUNICATIONS CONTROLLER 3720 COMMUNICATIONS CONTROLLER 3725 COMMUNICATION CONTROLLER 3737 REMOTE CHANNEL-TO-CHANNEL UNIT 3745 COMMUNICATION CONTROLLER 3800 PRINTER 3803 TAPE CONTROL UNIT @ 3811 CONTROL UNIT FOR 3211 PRINTER 3890 DOCUMENT PROCESSOR 4245 IMPACT LINE PRINTER 4248 IMPACT LINE PRINTER # 4952 SERIES/1 # 4956 SERIES/1 # 4964 SERIES/1 # 4993 SERIES/1 5088 GRAPHICS CHANNEL CONTROLLER 6262 IMPACT LINE PRINTER 7170 ASCII DEVICE ATTACH CONTROL UNIT 7171 ASCII DEVICE ATTACH CONTROL UNIT 8232 LAN CHANNEL STATION * SEE RPQ ZB7708 FOR ATTACHMENT TO OTHER PROCESSORS @ SEE RPQ 8P1439 FOR ATTACHMENT TO OTHER PROCESSORS # SEE RPQ ZD7285 FOR ATTACHMENT TO OTHER PROCESSORS

TAPE SUBSYSTEM 3505 CARD READER 3525 CARD PUNCH * 3540 DISKETTE READER 3705 COMMUNICATIONS CONTROLLER <em>3720</em>

2003 - I/O DEVICE ATTACHMENTS -INFO

ibm/Other software/Tealeaf Customer Experience-Tealeaf Customer Experience 9.0.1A IBM Tealeaf PCA 3724-15 Fix Pack

ibm/Other software/Tealeaf Customer Experience-Tealeaf Customer Experience 9.0.1A IBM Tealeaf PCA 3724

IBM Fix Central - 9.0.1A_IBMTealeaf_PCA-3724-15_FixPack

Hi, Can we integrate Rational System Architect with Rational Quality Manager? if yes, please let me know the procedure to integrate Rational System Architect with Rational Quality Manager. waiting for your valuable response. Regards, Rajesh Gottapu.

Hi, Can we integrate Rational System Architect with Rational Quality Manager? if yes, please let me know

RationalSystemArchitect_RQM - Jazz Forum

We run builds on a Windows machine. There's a similar problem forUNIX-like systems, I presume.I want to refer to a Windows variable in a step's statement.I currently have if %%errorlevel%% neq 0 (echo error in checkstyle run for app&amp;amp; exit /b 1)This works only by coincidence, so to speak. Bui...

We run builds on a Windows machine. There's a similar problem forUNIX-like systems, I presume.I want

Referring to Windows variables - Jazz Forum

IBM® 3720 Bytes Descripción 14-23 Nivel de microcódigo 24 Tipo y nivel de programa de control 25-70 Identificación de cliente 71-74 3720 75-76 01⁄02⁄11⁄12 77-84 Número de serie de máquina Bytes Descripción 85 Datos históricos de microcódigo Último arreglo de microcódigo (MCF) Aplicado: ID de MCF (8 caracteres) fecha de aplicación (3 caracteres) Número de parches aplicados más recientemente ...

IBM 3720

Resumen de información de dispositivo Para obtener la información de dispositivo más actualizada, consulte la publicación de dispositivo específica, utilice la opción Consultar hardware soportado y UIMs instalados en el panel de selección de tareas primarias de HCD o el soporte de Imprimir hardware soportado. La Tabla 1 muestra una lista proporcionada por IBMque muestra el orden de dispositivos ...

Resumen de información de dispositivo

IBM® 3720 Bytes Description 14-23 Microcode level 24 Control program type and level 25-70 Customer identification 71-74 3720 75-76 01⁄02⁄11⁄12 77-84 Machine serial number Bytes Description 85 Microcode historical data Last microcode fix (MCF) Applied: MCF ID (8 characters) application date (3 characters) Number of most recently applied patches (binary) Most recently applied patches: 16 entries, ...

Administrators perform installation, administration, troubleshooting, monitoring, metering, and platform APIs. Some courses are still in development. Review the release notes course for roadmap.

Administrators perform installation, administration, troubleshooting, monitoring, metering, and platform

Administrator: IBM Cloud Pak for Data V4.x

Hello, We use RTC 2.0.0.2. We added visual studio project to RTC and succeed to work with the source control. We added some more solutions. Now we tried to change some cpp files. We do not see them in the outgoing, but only in the unresolved. Also, We tried to perform checkin and got the following: ...

Hello, We use RTC 2.0.0.2. We added visual studio project to RTC and succeed to work with the source

RTC with visual studio 2005 - Jazz Forum

Hi, Can anyone please tell me how can i obtain the available streams in a given team area programmatically? Like there is a method to create a stream (createStream in IWorkspaceManager), is there another to obtain the all created streams? Sonali

Hi, Can anyone please tell me how can i obtain the available streams in a given team area programmatically

getting streams from team area - Jazz Forum

I would like to construct a BIRT report that uses the current signed on user as part of the birt query. I've not been able to find the solution so far. Does anyone have any ideas how to do this? Thanks Adam

I would like to construct a BIRT report that uses the current signed on user as part of the birt query

Obtain current user for Birt report - Jazz Forum

THIS RPQ PROVIDES TYPE 2.1 SUPPORT FOR THE 5394 TO ATTACH TO THE 2217 Nways (R) MULTIPROTOCOL CONCENTRATOR. IT IS FUNCTIONALLY IDENTICAL TO 5394 RPQ 8Q0775. THIS RPQ MAY ONLY BE ORDERED WITH A NEW 2217 ORDER OR AS AN MES TO AN EXISTING MACHINE. (R) REGISTERED TRADEMARK OF THE INTERNATIONAL BUSINESS

THIS RPQ PROVIDES TYPE 2.1 SUPPORT FOR THE 5394 TO ATTACH TO THE 2217 Nways (R) MULTIPROTOCOL CONCENTRATOR

2217 - 5394 CONNECTIVITY RPQ

DESCRIPTION THE NETVIEW-TO-AS/400 BRIDGE PROVIDES A VEHICLE FOR SENDING ALERT INFORMATION FROM AN MVS HOST NETVIEW(TM) TO AN AS/400(TM) SYSTEM WITHOUT INTERFERING WITH NETVIEW'S PROCESSING OF GENERIC ALERTS. THE PRPQ CONSISTS OF LOAD MODULES WHICH RUN AS A NETVIEW USER TASK. THE PRPQ USER TASK

DESCRIPTION THE NETVIEW-TO-AS/400 BRIDGE PROVIDES A VEHICLE FOR SENDING ALERT INFORMATION FROM AN MVS

5799 - NETVIEW-TO-AS/400 BRIDGE

I added new linktypes plugin. It works ok in the Web UI (i.e I can add these new link types).  The new linktypes are not visible in the eclipse client unless i add the plugin jar into the eclipse RTC client plugin. Is there a way to avoid this and still have RTc client recognize the ew linktypes? ...

I added new linktypes plugin. It works ok in the Web UI (i.e I can add these new link types).  The new

How to make new linktypes visible in RTc client? - Jazz Forum

Is it possible to install the RTC Eclipse Client into an existing Eclipse 3.7.2?

RTC 3.01 and Eclipse 3.7.2 - Jazz Forum

how to create a work item in RQM using webservice ? ============ Now, i want to create a Rational Quality Manager WorkItem using webservice, and then it will using Java class with webservice,and now,the java class to excute create operation. if someone know how to do it, please tell me. Thanks

how to create a work item in RQM using webservice ? ============ Now, i want to create a Rational Quality

how  to create a work item in RQM using webservice ? - Jazz Forum

Our Tomcat is authenticating users against LDAP (login is successful), but I am unable to complete the last step in the Jazz LDAP confuration guide at: https://jazz.net/wiki/bin/view/Main/RoleMigrationAndLdapConfiguration#Configuring_Jazz_to_import_users Step 1 in that section instructs the admin t...

Our Tomcat is authenticating users against LDAP (login is successful), but I am unable to complete the

LDAP auth:  last step, configuring Jazz properties - Jazz Forum

We've just posted the 3.0 M6 milestone builds for Rational Team Concert, Rational Quality and Rational DOORS Requirements Professional. This is quite a landmark for the combined development team. In addition to new features for each product, the integrations between the products are enhanced and lev...

We've just posted the 3.0 M6 milestone builds for Rational Team Concert, Rational Quality and Rational

3.0 M6 milestone releases of Workbench for CLM products - Jazz Forum

Authorized users can download fixes from IBM Fix Central website - Emulex 10Gb CNA Firmware Update

Emulex 10Gb CNA Firmware Update [4199]

ABSTRACT: THIS RPQ PROVIDES TYPE 2.1 SUPPORT FOR THE 5394 TO ATTACH TO THE 2210 Nways (R) MULTIPROTOCOL ROUTER. IT IS FUNCTIONALLY IDENTICAL TO THE 5394 RPQ 8Q0775. THIS RPQ IS FOR INFORMATION ONLY AND MAY ONLY BE ORDERED USING SPECIAL ORDERING VEHICLE MACHINE 2211 MODEL ZZZ. THIS SHOULD ONLY BE

ABSTRACT: THIS RPQ PROVIDES TYPE 2.1 SUPPORT FOR THE 5394 TO ATTACH TO THE 2210 Nways (R) MULTIPROTOCOL

2210 - 5394 CONNECTIVITY RPQ / 2210

Authorized users can download fixes from IBM Fix Central website - Firmware for Local Console Managers

Firmware for Local Console Managers [7978]

Firmware for Local Console Managers [6380]

Authorized users can download fixes from IBM Fix Central website - SHA-256: ea9c18eed1da6e78575f60dfa967dff6325177b6f5d431d22f7b5087edb22e21

QRadar Packet Capture / QRadar Packet Capture Data Node 7.3.3 Patch 2 [IBM Security QRadar Packet Capture

QRadar Packet Capture / QRadar Packet Capture Data Node 7.3.3 Patch 2 [IBM Security QRadar Packet Capture]

Authorized users can download fixes from IBM Fix Central website - Cisco Nexus 5000 family of switches latest firmware level.

Authorized users can download fixes from IBM Fix Central website - Cisco Nexus 5000 family of switches

Cisco Nexus 5000 Series Release [Cisco Nexus 5000 for IBM System Storage (3722-S51, S52)]

ibm/systemx/8956-NVIDIA Device Driver for Windows Server 2012 R2, 2012, 2008 R2, and 2008 64

IBM Fix Central - NVIDIA Device Driver for Windows Server 2012 R2, 2012, 2008 R2, and 2008 64

Firmware for Local Console Managers [7233]

ibm/systemx/7944-Emulex 4Gb Fibre Channel HBA (LPe11k) Firmware and Boot Code - 2.82x6-5.12a3

IBM Fix Central - Emulex 8Gb Fibre Channel HBA (LPe12k) Firmware and Boot Code - 2.00x6-5.12a3

Firmware for Local Console Managers [7321]

Firmware for Local Console Managers [7974]

ibm/systemx/1914-IBM RDX drive firmware update

IBM Fix Central - IBM RDX drive firmware update

ibm/systemx/7147-Emulex 4Gb Fibre Channel HBA (LPe11k) Firmware and Boot Code - 2.82x6-5.12a3

IBM Fix Central - Emulex 4Gb Fibre Channel HBA (LPe11k) Firmware and Boot Code - 2.82x6-5.12a3

ibm/systemx/7379-Emulex UCNA Phase 2.3 Firmware for Linux/Windows (2.103.397.31) -Release 5.1.42

IBM Fix Central - Emulex UCNA Phase 2.3 Firmware for Linux/Windows (2.103.397.31) -Release 5.1.42

ibm/systemx/7321-NVIDIA Display Driver for Windows Server 2012, W2K8R2, W2K8 64bit

IBM Fix Central - NVIDIA Display Driver for Windows Server 2012, W2K8R2, W2K8 64bit

Authorized users can download fixes from IBM Fix Central website - IBM RDX drive firmware update

IBM RDX drive firmware update [8877]

Emulex 10Gb CNA Firmware Update [7377]

Contenido y código de la comunidad - IBM Developer

IBM Fix Central es la ubicación común para descargar actualizaciones de muchos productos de IBM para clientes con titularidades y acuerdos de servicio.

IBM z ha autorizado a los PTF a visitar IBM Shopz.

¿Busca el código de error %s de IBM Content Navigator?