Setting the IP address in Windows XP and Windows 2000

To set the IP address within Windows XP and Windows 2000, complete these steps.

1. Click Start > Control Panel.
2. On the control panel, double-click Network Connections.
3. Right-click Local Area Connection.
4. Click Properties.
5. Select Internet Protocol (TCP/IP), and then click Properties.
   Attention: Record the current settings before making any changes. This will allow you to restore these settings if you disconnect the PC or notebook after setting up the ASMI Web interface.
   Note: If Internet Protocol (TCP/IP) does not appear in the list, do the following steps:

   1. Click Install.
   2. Select Protocol, and then click Add.
   3. Select Internet Protocol (TCP/IP).
   4. Click OK to return to the Local Area Connection Properties window.
6. Select Use the Following IP Address.
7. Complete the IP address, Subnet mask, and Default gateway fields by using the values in step 4 from Accessing the ASMI using a Web Browser.
8. Click OK on the Local Area Connection Properties window. It is not necessary to restart your PC.