런타임 환경 정의
구성할 런타임 환경 (RTE) 을 정의하려면 RTE의 이름을 지정하고 동일한 글로벌 특성을 공유하는 모든 RTE의 JCL이 저장되는 라이브러리를 식별하며 RTE 이름과 함께 이 RTE의 데이터 세트를 고유하게 식별하는 상위 레벨 규정자를 제공합니다.
프로시저
- 다음 명령을 사용하여 PARMGEN을 실행하십시오.
여기서 gbl_target_hilev는 제품이 설치된 SMP/E 대상 라이브러리의 상위 레벨 규정자입니다.EX 'gbl_target_hilev.TKANCUS'z/OS 설치 및 구성 도구의 시작 화면이 표시됩니다.KCIPQPGW Welcome to the z/OS Installation and Configuration Tools for z Systems Management Suites Option ===> 1. Checklist: System preparation checklists Tip: Read/Print Checklists prior to installation and configuration. 2. Installation Workflow: SMP/E-install z/OS products with Install Job Generator (JOBGEN) Conditional: JOBGEN is not required when using SystemPac or ServerPac. 3. Configuration Workflow (Post-installation): Configure z/OS products with Parameter Generator Workflow (PARMGEN) I. What's New in PARMGEN? Maintenance Level: HKCI310 PTF UA94193 (APAR OA53974 4Q17 Interim Feature) ©Copyright IBM Corporation 1992-2017 Licensed Material - Program Property of IBM - 3 (구성 워크플로우) 를 선택하십시오.이 TSO 사용자 ID를 사용하여 PARMGEN을 처음 호출하거나 CSI 대상 라이브러리가 사용자 ID가 액세스한 마지막 라이브러리와 다른 경우 Specify GBL_TARGET_HILEV Parameter 패널이 표시됩니다.
KCIP@TLV ------------- SPECIFY GBL_TARGET_HILEV PARAM Command ===> PARMGEN stores configuration values in the TSO user's ISPF profile. If this is the first-time your TDITNT TSO user ID is invoking PARMGEN, enter the GBL_TARGET_HILEV-related values appropriate for your deployment: UNIT / STORCLAS / VOLSER MGMTCLAS GBL_TARGET_HILEV: ___________________________________ ________ / ________ / HLQ of SMP/E target (TK*) datasets ______ ________ Note: If this is not the first time your TDITNT ID is invoking PARMGEN, this panel is also presented if the GBL_TARGET_HILEV stored value changed from the last time you invoked PARMGEN. Verify GBL_TARGET_HILEV, UNIT, VOLSER, STORCLAS, and/or MGMTCLAS values accordingly. Reference: Last PARMGEN environment stored in TDITNT's ISPF profile: GBL_USER_JCL: RTE_PLIB_HILEV: RTE_NAME: Last GBL_TARGET_HILEV:SMP/E 대상 데이터 집합에 대한 상위 한정자를 입력하고, 필요한 경우 UNIT/VOLSER 및 STORCLAS/MGMTCLAS를 입력합니다. 다음 패널이 표시됩니다.KCIPQPGA -------- PARAMETER GENERATOR (PARMGEN) WORKFLOW MENU ----------------- Command ===> Quick Configuration Mode Enter parameter values appropriate for the LPAR runtime environment (RTE). GBL_USER_JCL: ____________________________________________ (for example, TDITNT.ITM63055.SYSPLEX.PARMGEN.JCL) Specify the dataset name of the PARMGEN common/global library for the different LPAR runtime environments (RTEs). Use the same dataset for managing the different LPAR RTEs. Multiple users can specify the same dataset to manage RTEs. RTE_PLIB_HILEV: ________________________ Specify the High-Level Qualifier (&hlq) portion of the PARMGEN interim staging and work libraries for this LPAR RTE: - &hlq.&rte_name.IK* (IKANCMDU,IKANPARU,IKANSAMU) - &hlq.&rte_name.WK* (WKANCMDU,WKANPARU,WKANSAMU) - &hlq.&rte_name.WCONFIG RTE_NAME: ________ (Type ? for a list of configured RTEs) Specify the runtime environment (&rte_name) for this LPAR. - 작성하려는 RTE에 대해 요청된 값을 제공하십시오.
- GBL_USER_JCL
- PARMGEN 글로벌 사용자 JCL 라이브러리의
데이터 세트 이름을 지정합니다. LPAR에서 작성할 수 있는 모든 RTE에 대한 정의를 저장하는 데 사용할 완전한 이름을 입력하십시오. 데이터 세트가 없는 경우 이름을 정정하거나 데이터 세트를 할당하도록 프롬프트가 표시됩니다. 예를 들어,TDITN.IDTST.PARMGEN.JCL입니다.
PARMGEN 글로벌 사용자 JCL 라이브러리는 PARMGEN 프로세스가 변수 구성 프로파일을 작성하는 위치이기도 합니다.
- RTE_PLIB_HILEV
- 다음 PARMGEN 작업 라이브러리에
사용할 비VSAM 상위 레벨 규정자를 지정합니다. 예를 들어, TDITN.IDTST입니다.
- 구성 프로파일 및 기타 멤버가 저장되는 WCONFIG 제어 라이브러리
- PARMGEN 제품 런타임 멤버 (템플리트 버전) 가 저장되는 임시 스테이징 (IK*) 라이브러리
- PARMGEN 파일 조정 런타임 멤버 및 작업이 작성되는 작업 출력 (WK*) 라이브러리
- RTE_NAME
- 작성 중인 RTE의 고유 이름을 지정합니다. 각 PARMGEN및 런타임 라이브러리 세트가 고유하도록 RTE_PLIB_HILEV 값에 이름이 추가됩니다. %RTE_PLIB_HILEV%.% RTE_NAME% .WCONFIG (%RTE_NAME%).팁: LPAR에 대해 더 많은 RTE가 작성되는 경우 LPAR의 이름과 몇 가지 구별되는 요소를 사용할 수 있습니다. 예: SYSA.
- 워크플로우 기본 옵션 메뉴로 진행하려면 Enter를 누르십시오.다음 메시지가 표시됩니다.
KCIP@MSG -------------------- PARMGEN MESSAGES ----------------------------- Command ===> You have asked to configure a new RTE profile. Proceed to configure a new RTE profile. Press ENTER to continue. Press F3 to abort. - Enter를 누르십시오.
파라미터 제너레이터(PARMGEN) 워크플로 - 기본 옵션 메뉴(KCIPQPGB)가 표시됩니다.
KCIPQPGB PARAMETER GENERATOR (PARMGEN) WORKFLOW - PRIMARY OPTION MENU -------- Option ===> Quick Configuration Mode GBL_USER_JCL: TDITN.IDTST.PARMGEN.JCL RTE_PLIB_HILEV: TDITN.IDTST RTE_NAME: SYSA Note: Perform steps 1 through 5 in sequence, repeating steps as necessary. If reconfiguring this RTE, See Maintenance Scenarios F1=Help topic. Enter n (1-5) to perform tasks. Enter ns (1s-5s) for detailed job/task status. Description Job/Label Status Date -------------------------------------------- --------- --------- ---------- 1. Set up/Refresh PARMGEN work environment. KCIJPCFG 2. Customize PARMGEN configuration profiles. SYSA 3. Create this RTE's runtime members and jobs. $PARSE 4. Submit batch jobs to complete PARMGEN setup. SUBMIT 5. Perform post configuration steps. POSTCFG R Create next RTE - Reset fields. New RTE