POWER7 information

Removing a disk drive or solid-state drive from the 8248-L4T, 8408-E8D, or 9109-RMD

Learn to remove a failed disk drive or solid-state drive from the system, a drive enclosure, or an expansion unit with the system or logical partition power turned on or turned off.

Removing a disk drive or solid-state drive from the 8248-L4T, 8408-E8D, or 9109-RMD with the AIX system or logical partition power turned on
Learn to remove a failed Small Computer System Interface (SCSI) or serial-attached SCSI (SAS) drive in a system or an expansion unit while the power of the AIX® operating system or logical partition that controls the drive location is turned on.
Removing a disk drive or solid-state drive from the 8248-L4T, 8408-E8D, or 9109-RMD with the Linux system or logical partition power turned on
Learn to remove a Small Computer System Interface (SCSI) or serial-attached SCSI (SAS) drive in a system or expansion unit while the power of the Linux operating system or logical partition that controls the drive location is turned on.
Removing a disk drive or solid-state drive from the 8248-L4T, 8408-E8D, or 9109-RMD with the IBM i system or logical partition power turned on
Learn how to remove a failed Small Computer System Interface (SCSI) or serial-attached SCSI (SAS) drive from a system or an expansion unit with the power turned on to the IBM i operating system or a logical partition that controls the drive location.
Removing a disk drive or solid-state drive by using the hot-spare function in an IBM i system or logical partition from 8248-L4T, 8408-E8D, or 9109-RMD
You can use the hot-spare function to remove a disk drive or solid-state drive in a system or expansion unit while the IBM i operating system or logical partition that controls the drive location is powered-on.
Removing a disk drive or solid-state drive from the 8248-L4T, 8408-E8D, or 9109-RMD with the system or logical partition power turned off
Learn to remove a failed Small Computer System Interface (SCSI) or serial-attached SCSI (SAS) drive in a system or logical partition that controls the disk drive or solid-state drive location with the power turned off.

Parent topic: Disk drives or solid-state drives for the 8248-L4T, 8408-E8D, or 9109-RMD

Related information:

Backplanes

Removing and replacing a disk drive in the 5887 disk drive enclosure unit

Send feedback Rate this page

Last updated: Thu, November 20, 2014