POWER7 information

SAS RAID enablement and cache battery pack for the 8248-L4T, 8408-E8D, or 9109-RMD

You might need to configure redundant array of independent disks (RAID) on the serial-attached SCSI (SAS) disk drives in your system enclosure. Use these instructions to install features to enable RAID on your IBM® PowerLinux™ 7R4 (8248-L4T), the IBM Power® 750 (8408-E8D), and the IBM Power 760 (9109-RMD) systems.

The following instructions will enable you to install SAS RAID enablement cards to prepare your system to use SAS disk drives in a RAID configuration.

To find information on installing adapters or configuring RAID on your system see the following links:

To view the PCI adapters, see PCI adapters
To view the SAS RAID controllers for AIX® operating system, see SAS RAID controllers for AIX
To view the SAS RAID controllers for IBM i operating system, see SAS RAID controllers for IBM i and the IBM i Information Center website.
To view the SAS RAID controllers for Linux operating system, see SAS RAID controllers for Linux

Send feedback Rate this page

Last updated: Mon, December 15, 2014