EREP Selection Parameters
Use the selection parameters in the following table to select the records for EREP to use.
SELECTION PARAMETERS | TELLS EREP TO: |
---|---|
CPU (Processor serial and machine type numbers) | Use only the records associated with this particular processor. |
CPUCUA (Processor serial number and channel unit address) | Use only the records associated with this channel unit attached to this processor. |
CUA (channel unit address or number) | Use only the records associated with this particular channel unit address or channel unit number. |
DATE | Use only the records created during this date range. |
DEV (Device type) | Use only the records associated with this particular device type; or, conversely, do not use the records associated with this device type. |
DEVSER (Device serial number) | Use only the OBR records associated with this tape device serial number. (Use only for the THRESHOLD report and only with the 3410, 3420, and 8809 tape OBR records.) |
ERRORID (Error identifier) | Use only the MCH and MVS software records containing this particular error identifier. |
LIA/LIBADR (Line interface [base] address) | Use only the 3705, 3720, 3725 or 3745 communication controller records containing this line interface address. |
MOD (Processor model) | Use only the records containing this processor machine type (number). |
MODE (370 or 370XA) | Use only the records created in this operating mode. |
SYMCDE (Fault symptom code) | Use only the 33XX DASD records containing this particular fault symptom code. |
TERMN (Terminal name) | Use only the VTAM OBR records containing this terminal name. |
TIME | Use only the records created during this time range. |
TYPE (Record type) | Use only the records of the specified types. |
VOLID (Volume serial number) | Use only the 33XX DASD or 34XX tape records containing this volume serial number. |
Note:
- Table 1 shows parameters that cannot be used together.
- For the syntax of each parameter, refer to Parameter Descriptions in the EREP Reference.