bind()

The bind() call binds a unique local name to the socket using descriptors. After calling socket(), the descriptor does not have a name associated with it. However, it does belong to a particular addressing family, as specified when socket() is called. The exact format of a name depends on the addressing family. The bind() call also allows servers to specify the network interfaces from which they want to receive UDP packets and TCP connection requests.

#include <manifest.h>
#include <bsdtypes.h>
#include <socket.h>
#include <in.h>
int bind(int s, struct sockaddr *name, int namelen)
Parameter
Description
s
Socket descriptor returned by a previous socket() call
name
Points to a sockaddr structure containing the name to be bound to s
namelen
Size of name in bytes, which specifies the length of the sockaddr structure.

The s parameter is a socket descriptor of any type created by calling socket().

The name parameter points to a buffer containing the name to be bound to s. The namelen parameter is the size, in bytes, of the buffer pointed to by name.

Related information

Socket descriptor created in the AF_INET domain

If the socket descriptor s was created in the AF_INET domain, then the format of the name buffer is expected to be sockaddr_in, as defined in the header file IN.H. 
struct in_addr
{
        u_long s_addr;
};
struct sockaddr_in
{
        short   sin_family;
        u_short sin_port;
        struct  in_addr sin_addr;
        char    sin_zero[8];
};

The sin_family field must be set to AF_INET.

The sin_port field identifies the port to which the application must bind. It must be specified in network byte order. If sin_port is set to 0, the caller expects the system to assign an available port. The application can call getsockname() to discover the port number assigned.

The in_addr sin_addr field is set to the internet address and must be specified in network byte order. On hosts with more than one network interface (called multihomed hosts), a caller can select the interface to which it should bind. Subsequently, only UDP packets and TCP connection requests from this interface (the one value matching the bound name) are routed to the application. If this field is set to the constant INADDR_ANY, as defined in IN.H, the caller is requesting that the socket be bound to all network interfaces on the host. Subsequently, UDP packets and TCP connections from all interfaces matching the bound name are routed to the application. This becomes important when a server offers a service to multiple networks. By leaving the address unspecified, the server can accept all UDP packets and TCP connection requests made of its port, regardless of the network interface on which the requests arrived.

The sin_zero field is not used and should be set to all zeros.

Socket descriptor created in the AF_IUCV domain

If the socket descriptor s is created in the AF_IUCV domain, the format of the name buffer is expected to be sockaddr_iucv, as defined in the header file SAIUCV.H. 
struct sockaddr_iucv
{
    short           siucv_family;    /* addressing family */
    unsigned short  siucv_port;      /* port number */
    unsigned long   siucv_addr;      /* address */
    unsigned char   siucv_nodeid[8]; /* nodeid to connect to */
    unsigned char   siucv_userid[8]; /* userid to connect to */
    unsigned char   siucv_name[8];   /* iucvname for connect */
};
  • The siucv_family field must be set to AF_IUCV.
  • The siucv_port, siucv_addr, and siucv_nodeid fields are reserved for future use.
  • The siucv_port and siucv_addr fields must be set to zero.
  • The siucv_nodeid field must be set to exactly eight blank characters.
  • The siucv_userid field is set to the MVS™ user ID of the application making the bind call. This field must be eight characters long, padded with blanks to the right. It cannot contain the NULL character.
  • The siucv_name field is set to the application name by which the socket is to be known. It must be unique, because only one socket can be bound to a given name. The preferred form of the name contains eight characters, padded with blanks to the right. The eight characters for a connect() call executed by a client must exactly match the eight characters passed in the bind() call executed by the server.
Note: Internally, dynamic names are built using hexadecimal character strings representing the internal storage address of the socket. You should choose names that contain at least one non-hexadecimal character to prevent potential conflict. Hexadecimal characters include 0–9, and a–f. Uppercase A–F are considered non-hexadecimal and can be used by the user to build dynamic names.

Return values

The value 0 indicates success; the value -1 indicates an error. Errno identifies the specific error.
Errno
Description
EADDRINUSE
The address is already in use. See the SO_REUSEADDR option described under getsockopt() and the SO_REUSEADDR option described under the setsockopt() for more information. This Errno might also be returned if the port is configured as RESERVED on a port reservation statement in the TCP/IP profile. For details, see TCP/IP profile (PROFILE.TCPIP) and configuration statement information in the z/OS Communications Server: IP Configuration Reference.
EADDRNOTAVAIL
The address specified is not valid on this host. For example, the internet address does not specify a valid network interface.
EAFNOSUPPORT
The address family is not supported (it is not AF_INET).
EBADF
The s parameter is not a valid socket descriptor.
EFAULT
The name or namelen parameter specified an address outside of the caller address space.
EINVAL
The socket is already bound to an address. For example, an attempt to bind a name to a socket that is in the connected state. This Errno might also be returned if an invalid parameter was passed on the bind() invocation. Check the passed parameter values and ensure that they are specified as described above.

Example

The following examples show the bind() call. The internet address and port must be in network byte order. To put the port into network byte order, the htons() utility routine is called to convert a short integer from host byte order to network byte order. The address field is set using another utility routine, inet_addr(), which takes a character string representing the dotted decimal address of an interface and returns the binary internet address representation in network byte order. Finally, it is a good idea to clear the structure before using it to ensure that the name requested does not set any reserved fields. See connect() for examples how a client might connect to servers.

This example illustrates the bind() call binding to interfaces in the AF_INET domain. 
int rc;
int s;
struct sockaddr_in myname;
struct sockaddr_iucv mymvsname;
int bind(int s, struct sockaddr *name, int namelen);
/* Bind to a specific interface in the internet domain */
/* make sure the sin_zero field is cleared */
memset(&myname, 0, sizeof(myname));
myname.sin_family = AF_INET;
myname.sin_addr = inet_addr(“129.5.24.1”); /* specific interface */
myname.sin_port = htons(1024);
⋮
rc = bind(s, (struct sockaddr *) &myname, sizeof(myname));
/* Bind to all network interfaces in the internet domain */
/* make sure the sin_zero field is cleared */
memset(&myname, 0, sizeof(myname));
myname.sin_family = AF_INET;
myname.sin_addr.s_addr = INADDR_ANY; /* specific interface */
myname.sin_port = htons(1024);
⋮
rc = bind(s, (struct sockaddr *) &myname, sizeof(myname));
/* Bind to a specific interface in the internet domain.
   Let the system choose a port                        */
/* make sure the sin_zero field is cleared */
memset(&myname, 0, sizeof(myname));
myname.sin_family = AF_INET;
myname.sin_addr = inet_addr(“129.5.24.1”); /* specific interface */
myname.sin_port = 0;
⋮
rc = bind(s, (struct sockaddr *) &myname, sizeof(myname));
This example illustrates the bind() call binding to interfaces in the AF_IUCV domain. 
/* Bind to a name in the IUCV domain */
/* make sure the siucv_addr, siucv_port fields are zeroed and the
   siucv_nodeid fields is set to blanks */
memset(&mymvsname, 0, sizeof(mymvsname));
strncpy(mymvsname.siucv_nodeid, “        ”, 8);
strncpy(mymvsname.siucv_userid, “        ”, 8);
strncpy(mymvsname.siucv_name,   “        ”, 8);
mymvsname.siucv_family = AF_IUCV;
strncpy(mymvsname.siucv_userid, “MVSUSER1”, 8);
strncpy(mymvsname.siucv_name, “APPL”, 4);
⋮
rc = bind(s, (struct sockaddr *) &myname, sizeof(myname));

The binding of a stream socket is not complete until a successful call to bind(), listen(), or connect() is made. Applications using stream sockets should check the return values of bind(), listen(), and connect() before using any function that requires a bound stream socket.

Related calls

gethostbyname(), getsockname(), htons(), inet_addr(), listen(), socket()