ADDRESS= {('delivery address'[,'delivery address']...)}
{delivery-address }
See section ADDRESS parameter
|
|
delivery address: 1 - 4 delivery-address
subparameters; a delivery-address is 1 - 60 valid EBCDIC text values |
Specifies an address to be printed on
output separator pages. |
AFPPARMS=datasetname
See section AFPPARMS parameter
|
datasetname must be a sequential
data set.
datasetname must be cataloged.
See the DSNAME parameter on the DD statement for additional
syntax rules.
|
Use the AFPPARMS keyword to
reference the data set name which specifies the parameter file that
contains the parameters and values for the AFP print distributor feature
of PSF. The parameters specified in this parameter file augment parameters
specified on the output JCL statement. |
AFPSTATS= {YES}
{Y }
{NO }
{N }
See section AFPSTATS parameter
|
YES or Y: Requests that PSF produce an AFPSTATS
report for the printing of this sysout data set. NO or N: Specifies that PSF should not produce an AFPSTATS report
for the printing of this sysout data set.
|
Specifies to Print Services Facility™ (PSF) that an AFP Statistics About the
Printfile (AFPSTATS) report is to be generated while printing this
sysout data set. |
BUILDING= {'building identification'}
{building-identification }
See section BUILDING parameter
|
building identification: 1 - 60 valid EBCDIC text values |
Specifies a building location to be printed on output separator
pages. |
BURST= {YES}
{Y }
{NO }
{N }
See section BURST parameter
|
YES or Y: burster-trimmer-stacker
NO or N: continuous forms stacker
|
Directs output to a stacker on a 3800 Printing Subsystem. |
CHARS= {font-name }
{(font-name[,font-name]...)}
{STD }
{DUMP }
{(DUMP[,font-name]...) }
See section CHARS parameter
|
1 - 4 font-name subparameters:
1 - 4 alphanumeric or
national ($, #, @) characters
STD: character-arrangement
table (JES3 only)
DUMP: 204-character print
lines on 3800 dump
|
Names character-arrangement tables for printing on an AFP printer. Can request a high-density dump on
a SYSABEND or SYSUDUMP DD statement. |
CKPTLINE=nnnnn
See section CKPTLINE parameter
|
nnnnn: 0 - 32,767 |
Specifies the maximum lines in a logical page. (JES3 supports this parameter only when PSF prints the sysout data
set on an AFP printer.) |
CKPTPAGE=nnnnn
See section CKPTPAGE parameter
|
nnnnn: 1 - 32,767 |
Specifies the number of logical pages to be printed or transmitted
before JES takes a checkpoint. (JES3 supports this
parameter only when PSF prints the sysout data set on an AFP printer.) |
CKPTSEC=nnnnn
See section CKPTSEC parameter
|
nnnnn: 1 - 32,767 |
Specifies how many seconds of printing are to elapse between
each checkpoint of this sysout data set. (JES3 supports
this parameter only when PSF prints the sysout data set on an AFP
printer.) |
CLASS= {class}
{* }
See section CLASS parameter
|
class: A - Z, 0 - 9 *: same output class as MSGCLASS parameter
on JOB statement |
Assigns the sysout data set to an output class. |
COLORMAP=resource
See section COLORMAP parameter
|
resource: 1 - 8 alphanumeric or national ($, #, @) characters |
Specifies the AFP resource (object) for the data set that contains
color translation information. |
COMPACT=compaction-font-name
See section COMPACT parameter
|
compaction-font-name: 1 - 8 alphanumeric characters |
Specifies a compaction table for sending this sysout data set
to a SNA remote terminal. |
COMSETUP=resource
See section COMSETUP parameter
|
resource: 1 - 8 alphanumeric or national ($, #, @) characters |
Specifies the name of a macrofile setup resource that contains
the SETUP information. |
CONTROL= {PROGRAM}
{SINGLE }
{DOUBLE }
{TRIPLE }
See section CONTROL parameter
|
PROGRAM: each logical record begins with a carriage control
character SINGLE: single spacing
DOUBLE: double spacing
TRIPLE: triple spacing
|
Specifies that the data set records begin with carriage control
characters or specifies line spacing. |
COPIES= {nnn }
{(,(group-value[,group-value]...))}
See section COPIES parameter
|
nnn (JES2): 1 - 255
nnn (JES3): 0 - 255
1 - 8 group-values (JES2): 1 - 255
1 - 8 group values (JES3): 1 - 254
|
Specifies number of copies printed. For an
AFP printer, can instead specify number of copies of each page
printed before the next page is printed. |
COPYCNT= {xxx}
See section COPYCNT parameter
|
xxx: 0 - 2147483647
|
Specifies number of copies printed where the
limit is 2G in size. |
DATACK= {BLOCK }
{UNBLOCK}
{BLKCHAR}
{BLKPOS }
See section DATACK parameter
|
BLOCK: indicates errors are
not reported
UNBLOCK: indicates errors
are reported
BLKCHAR: indicates print errors
are blocked
BLKPOS: indicates data errors
are blocked
|
Indicates whether or not print-positioning errors and invalid
character data-check errors are to be blocked or not blocked. |
DDNAME= {ddname}
{stepname.ddname}
{stepname.procstepname.ddname} See section DDNAME parameter
|
ddname: DD to apply OUTPUT to stepname.ddname: DD to apply OUTPUT
to, with preceding STEP name. stepname.procstepname.ddname DD to apply
OUTPUT to, with preceding STEP and
PROCSTEP names.
|
Specifies the DDs to apply the
specifications on the OUTPUT statement to (JES2 only).
|
DEFAULT= {YES}
{Y }
{NO }
{N }
See section DEFAULT parameter
|
YES or Y: this statement can be implicitly referenced by sysout
DD statements NO or N: this statement cannot be implicitly referenced
by sysout DD statements.
|
Specifies that this is a default OUTPUT JCL statement. |
DEPT= {'department identification'}
{department-identification }
See section DEPT parameter
|
department identification: 1 - 60 valid EBCDIC text values |
Specifies a department identification to be printed on output
separator pages. |
DEST=destination
destination (JES2):
LOCAL
'IP:ipaddr'
name
Nnnnnn
NnRmmmmm to NnnnnnRm
(node,remote)
nodename.userid
'nodename.IP:ipaddr'
Rnnnnn or RMnnnnn or RMTnnnnn
Unnnnn
destination (JES3):
ANYLOCAL
'IP:ipaddr'
device-name
group-name
nodename
'nodename.IP:ipaddr'
nodename.remote
See section DEST parameter |
LOCAL: local device
ipaddr identifies a TCP/IP routing
designation.
name: named local or remote device Nnnnnn: node (1 - 32,767) NnRmm: node (1 - 32,767) and
remote work station (1 - 32,767);
6 digits
maximum for n and m combined
nodename.userid: node (1 - 8
alphanumeric characters) and userid
(1 - 8 alphanumeric characters) Rnnnnn or RMnnnnn or RMTnnnnn:
remote terminal (1 - 32,767) Unnnnn: local terminal (1 - 32,767)
ANYLOCAL: any local device
device-name: local device (1 - 8
alphanumeric or national ($, #, @)
characters)
group-name: 1 or more local
devices or remote stations
(1 - 8 alphanumeric or national
($, #, @) characters)
nodename: node (1 - 8 alpha-
numeric or national ($, #, @)
characters)
remote: remote workstation (1 - 8
alphanumeric or national
($, #, @) characters)
|
Sends a sysout data set to the specified destination. |
DPAGELBL= {YES}
{Y }
{NO }
{N }
See section DPAGELBL parameter
|
YES or Y: requests that the system print a security label on
each page. NO or N: requests that the system not print a security
label on each page.
|
Indicates whether the system should print a security label
on each page of output. |
DUPLEX= {NO }
{N }
{NORMAL}
{TUMBLE}
See section DUPLEX parameter
|
X'80' for NO
X'40' for NORMAL
X'20' for TUMBLE
|
Specifies whether the job prints on one or both sides of the
paper. Overrides comparable FORMDEF. |
FCB= {fcb-name}
{STD }
See section FCB parameter
|
fcb-name: 1 - 4 alphanumeric or national ($, #, @) STD: standard
FCB (JES3 only)
|
Specifies FCB image, carriage control tape for 1403 Printer,
or data-protection image for 3525 Card Punch. |
FLASH= {overlay-name }
{(overlay-name[,count])}
{(,count) }
{NONE }
{STD }
See section FLASH parameter
|
overlay-name: forms overlay frame (1 - 4 alphanumeric or national
($, #, @) characters) count: copies with overlay (0 - 255)
NONE: suppresses flashing
STD: standard forms flash overlay
(JES3 only)
|
For printing on a 3800 Printing Subsystem, indicates that the
data set is to be printed with forms overlay and can specify how many
copies are to be flashed. |
FORMDEF=membername
See section FORMDEF parameter
|
membername: 1 - 6 alphanumeric or national ($, #, @) characters |
Names a library member that PSF uses in printing the sysout
data set on an AFP printer. |
FORMLEN=nn[.mmm]{IN|CM}
See section FORMLEN parameter
|
nn= 0-99
mmm= 0-999
IN= inches
CM= centimeters
|
Allows PSF users to set the length of pages for print without
reconfiguring the printer. |
FORMS= {form-name}
{STD }
See section FORMS parameter
|
form-name: 1 - 8 alphanumeric or national ($, #, @) characters STD: standard form (JES3 only)
|
Identifies forms on which the sysout data set is to be printed
or punched. |
FSSDATA=value
See section FSSDATA parameter
|
values: 1-127 EBCDIC characters |
Defined by a functional subsystem. Refer to that subsystem's
documentation for the intent and use of this keyword. |
GROUPID=output-group
See section GROUPID parameter
|
output-group: 1 - 8 alphanumeric characters |
Specifies that this sysout data set belongs to a user-named
output group. (JES2 only) |
INDEX=nn
See section INDEX parameter
|
nn: 1 - 31 |
Specifies how many print positions the left margin is to be
indented for a sysout data set printed on a 3211 Printer with the
indexing feature. (JES2 only) |
INTRAY=nnn
See section INTRAY parameter
|
nnn: 1 - 255 |
Specifies the printer input tray from which to take paper for
the print job. Overrides comparable FORMDEF specification. |
JESDS= {ALL}
{JCL}
{LOG}
{MSG}
See section JESDS parameter
|
ALL: all of the job’s JCL,
LOG, and MSG data sets
JCL: all JCL processing data sets
LOG: job’s hard-copy log
MSG: job’s system messages
|
Requests that the indicated data sets for the job be processed
according to the parameters on this OUTPUT JCL statement. |
LINDEX=nn
See section LINDEX parameter
|
nn: 1 - 31 |
Specifies how many print positions to move the right margin
in from the full page width for a sysout data set printed on a 3211
Printer with the indexing feature. (JES2 only) |
LINECT=nnn
See section LINECT parameter
|
nnn: 0 - 255 |
Specifies the maximum lines JES2 is to print on each page.
(JES2 only) |
MAILBCC= {('bcc address'[,'bcc address']...)}
{bcc-address }
See section MAILBCC parameter
|
bcc address: 1-60 valid EBCDIC text values bcc address: 1
- 32 addresses allowed
|
Specifies the e-mail addresses of the recipients on the blind
copy list. |
MAILCC= {('cc address'[,'cc address']...)}
{cc-address }
See section MAILCC parameter
|
cc address: 1-60 valid EBCDIC text values cc address: 1 -
32 addresses allowed
|
Specifies the e-mail addresses of the recipients on the copy
list. |
MAILFILE= {'file id'}
{file-id }
See section MAILFILE parameter
|
file id: 1- 60 valid EBCDIC text values |
Specifies the file name of the attachment to an e-mail. |
MAILFROM= {'from address'}
{from-address }
See section MAILFROM parameter
|
from address: 1- 60 valid EBCDIC text values |
Specifies the descriptive name or identifier of the sender
of an e-mail. |
MAILTO= {('to address'[,'to address']...)}
{to-address }
See section MAILTO parameter
|
to address: 1- 60 valid EBCDIC text values to address: 1
- 32 addresses allowed
|
Specifies the e-mail addresses of the e-mail recipients. |
MERGE= {YES}
{Y }
{NO }
{N } See section MERGE parameter
|
YES or Y: OUTPUT JCL parameters will be the
job's default
NO or N: OUTPUT JCL parameters will not be the
job's default
|
Indicates whether or not the
parameters specified on the OUTPUT JCL statement will be the default
OUTPUT parameters for the job (JES2 only).
|
MODIFY= {module-name }
{([module-name][,trc])}
See section MODIFY parameter
|
module-name: 1 - 4 alphanumeric or national ($, #, @) characters
trc: font-name in CHARS parameter (0 for first,
1 for second, 2 for third, and 3 for fourth font-name) |
Specifies a copy-modification module in SYS1.IMAGELIB to be
used by JES to print the data set on a 3800 Printing Subsystem. |
NAME= {'preferred name'}
{preferred-name }
See section NAME parameter
|
preferred name: 1 - 60 valid EBCDIC text values |
Specifies the preferred name to be printed on output separator
pages. |
NOTIFY= {[node.]userid }
{([node.]userid1,...[node.]userid4)}
See section NOTIFY parameter
|
{node.}userid: node and userid to receive print complete message. |
Specifies the node and userid to receive a print complete message
when the sysout data set is printed. |
OFFSETXB=mmmm[.nnn]{IN }
{CM }
{MM }
{PELS }
{POINTS}
See section OFFSETXB parameter
|
mmmm: 0 - 9999
nnn: 0 - 999
IN: inches
CM: centimeters
MM: millimeters
|
Specifies the offset in the X direction from the page origin
(or partition origin for N_UP) for the back side of each output page. |
OFFSETXF=mmmm[.nnn]{IN }
{CM }
{MM }
{PELS }
{POINTS}
See section OFFSETXF parameter
|
mmmm: 0 - 9999
nnn: 0 - 999
IN: inches
CM: centimeters
MM: millimeters
|
Specifies the offset in the X direction from the page origin
(or partition origin for N_UP) for the front side of each output page. |
OFFSETYB=mmmm[.nnn]{IN }
{CM }
{MM }
{PELS }
{POINTS}
See section OFFSETYB parameter
|
mmmm: 0 - 9999
nnn: 0 - 999
IN: inches
CM: centimeters
MM: millimeters
|
Specifies the offset in the Y direction from the page origin
(or partition origin for N_UP) for the back side of each output page. |
OFFSETYF=mmmm[.nnn]{IN }
{CM }
{MM }
{PELS }
{POINTS}
See section OFFSETYF parameter
|
mmmm: 0 - 9999
nnn: 0 - 999
IN: inches
CM: centimeters
MM: millimeters
|
Specifies the offset in the Y direction from the page origin
(or partition origin for N_UP) for the front side of each output page. |
OUTBIN=nnnnn
See section INDEX parameter
|
nnnnn: 1 - 65535 |
Specifies the ID of the printer output bin where the data set
is to be sent. |
OUTDISP=[normal-output-disposition,
abnormal-output-disposition]
See section OUTDISP parameter
|
normal output disposition: WRITE, HOLD, KEEP, LEAVE, or PURGE. abnormal output disposition: WRITE, HOLD, KEEP, LEAVE, or PURGE.
|
Specifies the disposition of the sysout process instance for
normal or, in a non-APPC scheduling environment, abnormal termination
of the job step. (JES2 only) |
OVERLAYB=name
See section OVERLAYB parameter
|
name: 1 - 8 alphanumeric or national ($, #, @) characters |
Specifies placing the named medium overlay on the back side
of each printed sheet. |
OVERLAYF=name
See section OVERLAYF parameter
|
name: 1 - 8 alphanumeric or national ($, #, @) characters |
Specifies placing the named medium overlay on the front side
of each printed sheet. |
OVFL= {ON }
{OFF}
See section OVFL parameter
|
ON: JES3 should check for forms overflow on an output printer. OFF: JES3 should not check for forms overflow on an output printer.
|
Specifies whether or not JES3 should check for forms overflow
on an output printer. (JES3 only) |
PAGEDEF=membername
See section PAGEDEF parameter
|
membername: 1 - 6 alphanumeric or national ($, #, @) characters |
Names a library member that PSF uses in printing
the sysout data set on an AFP printer. |
PIMSG= {(YES[,msg-count])}
{(NO[,msg-count]) }
See section PIMSG parameter
|
YES: print messages from a functional subsystem NO: not
print messages from a functional subsystem
msg-count: number
of errors to cause printing to be terminated (0-999)
|
Indicates that messages from a functional subsystem should
or should not be printed in the listing following the sysout data
set. |
PORTNO=nnnnn
See section PORTNO parameter
|
nnnnn: 1 - 65535 |
Specifies the TCP port number at which Infoprint Server connects
to the printer rather than connecting to LPD on the printer. Specify
either PORTNO or PRTQUEUE, but not both. PRTQUEUE indicates the queue
used when connecting to LPD on the printer. |
PRMODE= {LINE }
{PAGE }
{process-mode}
See section PRMODE parameter
|
LINE: send data set to line-mode printer PAGE: send data set to page-mode printer
process-mode: installation-defined
mode (1 - 8 alphanumeric characters)
|
Identifies the process mode required to print
the sysout data set. |
PRMODE= {LINE }
{PAGE }
{process-mode}
See section PRMODE parameter
|
LINE: send data set to line-mode printer PAGE: send data set to page-mode printer
process-mode: installation-defined
mode (1 - 8 alphanumeric characters)
|
Identifies the process mode required to print
the sysout data set. |
PRTATTRS= {'attributename=value
attributename=value ...'}
See section PRTATTRS parameter
|
The minimum length is one character.
The maximum length is 127 characters.
Enclose the parameter in apostrophes because attribute names contain
lower case letters.
All EBCDIC text characters
are valid.
|
Use the PRTATTRS keyword to specify one or
more job attributes for Infoprint Server. See z/OS Infoprint Server User's Guide.
|
PRTERROR= {DEFAULT}
{QUIT }
{HOLD }
See section PRTERROR parameter
|
DEFAULT= Specifies that PSF will take the standard action if
a terminating error occurs during printing. This is the default. QUIT= Specifies that PSF will release the data set complete even
if a terminating error occurs during printing.
HOLD= Specifies
that if a terminating error occurs during printing, the data set will
remain on the JES SPOOL until the system operator releases it.
|
On the OUTPUT statement or dynamic output descriptor, indicates
the disposition of the SYSOUT data set to use if a terminating error
occurs during printing of the SYSOUT data with the PSF functional
subsystem. |
PRTOPTNS= {options data set entry name }
{'options data set entry name'}
See section PRTOPTNS parameter
|
print options: 1-16 valid EBCDIC characters. |
Identifies the print options data. |
PRTQUEUE= {print queue name }
{'print queue name'}
See section PRTQUEUE parameter
|
print queue: 1-127 valid EBCDIC characters. |
Identifies the target print queue name. |
PRTY=nnn
See section PRTY parameter
|
nnn: 0 - 255 (0 is lowest, 255 is highest) |
Specifies initial priority at which the sysout data set enters
the output queue. |
REPLYTO= {'reply address' }
{reply-address }
See section REPLYTO parameter
|
reply address: 1- 60 valid EBCDIC text values |
Specifies the e-mail address to which recipients can respond. |
RESFMT= {P240}
{P300}
See section RESFMT parameter
|
P240: specifies 240 pels per inch resolution. P300: specifies
300 pels per inch resolution.
|
Specifies the resolution used to format the print data set. |
RETAINS= {'<hhhh>:<mm>:<ss>'}
{FOREVER }
See section RETAINS and RETAINF parameters
|
retain time: 1-10 numeric characters or FOREVER. |
The successful transmission retain time specification. |
RETAINF= {'<hhhh>:<mm>:<ss>'}
{FOREVER }
See section RETAINS and RETAINF parameters
|
retain time: 1-10 numeric characters or FOREVER. |
The failed transmission retain time specification. |
RETRYL= {nnn}
See section RETRYL and RETRYT parameters
|
nnnnn: one to five numeric characters. |
The maximum number of retries. |
RETRYT= {'<hh>:<mm>:<ss>'}
See section RETRYL and RETRYT parameters
|
retry time: 1-10 numeric characters. |
Wait time between transmission retries. |
ROOM= {'room identification'}
{room-identification }
See section ROOM parameter
|
room identification: 1-60 valid EBCDIC text values |
Specifies a room identification to be printed on output separator
pages. |
SYSAREA= {YES}
{Y }
{NO }
{N }
See section SYSAREA parameter
|
YES or Y: requests that the system reserve a system area. NO or N: requests that the system not reserve a system area.
|
Indicates whether the system should reserve a system area on
each page of output. |
THRESHLD=limit
See section THRESHLD parameter
|
limit: 1 - 99999999 |
Specifies the maximum size for a sysout data set. Use it to
obtain simultaneous printing of large data sets or many data sets
from one job. (JES3 only) |
TITLE= {'description of output'}
{description-of-output }
See section TITLE parameter
|
description of output: 1 - 60 valid EBCDIC characters |
Identifies a report title to be printed on separator pages. |
TRC= {YES}
{Y }
{NO }
{N }
See section TRC parameter
|
YES or Y: data set contains TRC codes NO or N: data set
does not contain TRC codes
|
Specifies whether or not the sysout data set’s records contain
table reference codes (TRC) as the second character. |
UCS=character-set-code
See section UCS parameter
|
character-set-code: 1 - 4 alphanumeric or national ($, #, @)
characters |
Specifies universal character set, print train, or character-
arrangement table for an AFP printer. |
USERDATA=value
(value[,value]...)
See section USERDATA parameter |
From 1 to 16 values; each value may be from 1 to 60 EBCDIC
characters. |
Defined by the installation. Refer to your installation's
definition on the intent and use of this keyword. If your installation
does not define any use for this keyword, the information will be
syntax checked, stored as part of the output descriptor's information,
and then ignored. |
USERLIB={data-set-name }
{(data-set-name1,data-set-name2,
...data-set-name8)}
See section USERLIB parameter
|
data-set-name: 1 - 8 library data set names containing AFP
resources |
Identifies libraries containing AFP resources for PSF to use
when processing sysout data sets. |
USERPATH={path }
{(path1,path2,
...path8)}
|
pathname: 1 - 8 z/OS® UNIX file paths. For more information on specifying paths, see PATH parameter. |
Specifies a private path for TrueType/OpenType
fonts to PSF for the print application owner. |
WRITER=name
See section WRITER parameter
|
name: 1 - 8 alphanumeric characters |
Names an external writer to process the sysout data set rather
than JES. |