When you turn on the library for the first time, the Initial Setup
process starts automatically. Click Next to start the process.
The initial setup process guides you through the most fundamental settings of the library. The
process includes setting the Internal IP range, setting library network configuration, configuring
date and time, and setting the administrator PIN. Once you set the IP range, you can skip the
remaining items and stop the process at any time. From there, you can start the setup wizard from
the Management GUI to complete more configuration items.
Notes on navigation and entering data into the Operator Panel
The arrow keys on the front panel are used to select numeric and alphanumeric characters and
symbols. Capital and lowercase letters, numbers, and punctuation are available to use.
The right button under the arrows is Enter, which is pressed before you
enter text.
The left button under the arrows is Back/Return, which is used to delete
entries.
When the library starts up for the first time, the initial setup automatically begins. See Figure 1Figure 1. Initial setup
screen
Enter the IP address for your library. See IP range selection. This step cannot be skipped. Figure 2. IP address selection
Press Enter to unlock the Operator Panel.
Note: If you wait too long to
make your selection, the unit auto calibrates. The auto calibration finishes and returns you to the
login screen.
When you are logged in, the initial configuration process begins with Network
Settings.
Follow the prompts to set date and time, and administrator PIN.
When the initial setup is complete, the display returns to the Operator Panel main screen.
To check your configuration at any time, go to Configuration > Initial System Setup on the Operator Panel. On the Management GUI, go to Setting > Library.