The following table describes the NVMEM test menu for the N3300 and N3600.
| Test no | Test | Description |
|---|---|---|
1 |
Comprehensive NVMEM test |
Runs all tests in current mode. |
2 |
Battery test |
Tests the battery. |
71 |
Set battery armed |
Toggles between arming and disarming the battery |
75 |
Fill for power cycle test, burst write |
Fills NVRAM memory with data patterns for power cycle test, which does burst writes. |
76 |
Fill for power cycle test, burst read |
Fills NVRAM memory with data patterns for power cycle test, which does burst reads. |
77 |
Fill for power cycle test |
Fills NVRAM memory with data patterns for power cycle test. |
78 |
Verify data retention |
Checks the retention of data in NVRAM after a power cycle. Data comes from data patterns entered in Test 75. |
82 |
Display memory by address |
Displays the contents of a memory address location. |
91 |
Enable/disable looping |
Enables or disables continuous running of a diagnostic test. The test is stopped when Ctrl-C is pressed or when an error is encountered if option 92 is active. |
92 |
Stop/continue on error |
Starts or stops running a diagnostic test on an error. If looping is enabled, as set by option 91, looping continues after an error is encountered. |
93 |
Extended/normal test mode |
Enables or disables extended mode on tests where extended mode is an available option. |
99 |
Exit |
Exits this diagnostics menu. |