ESS 3000 Hardware Planning and Installation Guide

Notices
This information was developed for products and services offered in the US. This material might be available from IBM® in other languages. However, you may be required to own a copy of the product or product version in that language in order to access it.
Technical overview
The technical overview topics provide information about the key concepts of IBM Elastic Storage System 3000.
Planning for hardware
Before the IBM Service Support Representative (SSR) installs the system hardware, the customer must provide a plan that explains where and how the hardware will be installed, configured, and connected in the customer's network.
Installing
This section covers topics on how to rack, stack, unpack, and install an IBM Elastic Storage System 3000 system. It also guides the customer on how to fill out the installation worksheet.
Troubleshooting (SSR tasks)
This section will help you troubleshoot issues faced while configuring EMS and IBM Elastic Storage System 3000.
Planning worksheets (customer task)
Customers are responsible for completing the system planning worksheets.
Cabling Guide (SSR tasks)
This chapter illustrates various cabling scenarios of IBM Elastic Storage® System 3000.
Converting an older Elastic storage System Management Server for ESS 3000 compatibility
The following steps help to address field issues when an older Elastic Storage System Management Server (EMS) is used for the ESS 3000.
Switch VLAN configuration instructions
This topic describes the instructions that are needed to configure an IBM Cumulus switch VLAN.
Dual 24 port (48 ports) MGMT switch ESS configuration
This topic describes how to configure a pair of ECS4100-28T to be the ESS top of the rack (TOR) switches.
Cables/Adapters for SSR activities
This section shows the cables required for installing and configuring code on the server.