nim Command

Purpose

Performs operations on Network Installation Management (NIM) objects.

Syntax

nim { -o Operation} [ -F ] [ -t Type ] [ -a Attribute=Value . . . ] {ObjectName}

Description

The nim command performs an operation on a NIM object. The type of operation that is performed is dependent on the type of object that is specified by the ObjectName parameter. Possible operations include initializing environments and managing resources. You can use the lsnim command to display the list of supported operations.

Flags

Item	Description
-a Attribute = Value . . .	Assigns the specified value to the specified attribute. Use the lsnim -q Operation -t Type command to get a list of valid attributes for a specific operation.
-F	Overrides some safety checks.
-o Operation	Specifies an operation to perform on a NIM object. The possible operations are: activate Starts a managed system. allocate Allocates a resource for use. alt_disk_install Performs an alternate disk installation. alt_disk_mig Creates a copy of rootvg to a free disk (or disks) and simultaneously upgrades it to a new version or release level of AIX®. bos_inst Performs a BOS installation. change Changes an object's attributes. check Checks the status of a NIM object. chwpar Changes the characteristics of managed workload partitions. create Creates an instance of a managed system. cust Performs software customization. deactivate Stops a managed system. deallocate Deallocates a resource. define Defines an object. destroy Removes an instance of a managed system. diag Enables a system to boot a diagnostic image. dkls_init Initializes a diskless environment of a system. dtls_init Initializes a dataless environment of a system. fix_query Lists the fix information for an APAR or keyword.
-o Operation (Continued)	linux_inst Installs the Linux® operating system on stand-alone clients. lppchk Verifies installed filesets on NIM systems and SPOTs. lppmgr Eliminates unnecessary software images in an lpp_source. lslpp Lists licensed program information about an object. lswpar Shows the characteristics of managed workload partitions. maint Performs software maintenance. maint_boot Enables a system to boot in maintenance mode. reboot Reboots a NIM client system.

Item	Description
-o Operation (Continued)	remove Removes an object. reset Resets an object's NIM state. restvg Performs a restvg operation. select Includes and excludes group members from operations that are performed on the group. showlog Displays a NIM client's installation, boot or customization log, or a SPOT's installation log from the NIM master. showres Displays the contents of a NIM resource. sync Synchronizes the NIM database with an alternate master. sync_roots Synchronizes root directories for diskless and dataless clients for a specific Shared Product Object Tree (SPOT). syncwpar Synchronizes the managed workload partition software with the managing system. takeover Allows a machine that is configured as an alternate_master to take control of the NIM environment. unconfig Unconfigures the NIM master fileset. update Adds software to an lpp_source or removes software from an lpp_source. updateios Performs software customization and maintenance on a virtual input-output server (VIOS) management server that is of the vios or ivm type. Use the lsnim -POt Type command to get a list of the valid operations for a specific type.

Item

Description

-o Operation (Continued)

remove: Removes an object.
reset: Resets an object's NIM state.
restvg: Performs a restvg operation.
select: Includes and excludes group members from operations that are performed on the group.
showlog: Displays a NIM client's installation, boot or customization log, or a SPOT's installation log from the NIM master.
showres: Displays the contents of a NIM resource.
sync: Synchronizes the NIM database with an alternate master.
sync_roots: Synchronizes root directories for diskless and dataless clients for a specific Shared Product Object Tree (SPOT).
syncwpar: Synchronizes the managed workload partition software with the managing system.
takeover: Allows a machine that is configured as an alternate_master to take control of the NIM environment.
unconfig: Unconfigures the NIM master fileset.
update: Adds software to an lpp_source or removes software from an lpp_source.
updateios: Performs software customization and maintenance on a virtual input-output server (VIOS) management server that is of the vios or ivm type.

Use the lsnim -POt Type command to get a list of the valid operations for a specific type.

Item	Description
-t Type	Specifies the type of the NIM object for define operations. The possible types are: resource types: adapter_def Directory containing secondary adapter definition files. boot An internally managed NIM resource that is used to indicate that a boot image is allocated to a client. bosinst_data Configure file that is used during base system installation. devexports Device exports the file for workload partitions. dump Parent directory for client dump files. exclude_files Contains files to be excluded from a mksysb image. fb_script Executable script that is run during the first reboot of a machine. fix_bundle Fix (keyword) input file for the cust or fix_query operation. home Parent directory for client /home directories. image_data Configure file that is used during base system installation. installp_bundle Installp bundle file. ios_mksysb Represents a backup image that is taken from a VIOS management server that is of the vios or ivm type. linux_source Represents the Linux installation media. log Captures log data during a network installation. lpp_source Source device for optional product images.
-t Type (Continued)	mksysb mksysb image. nas_filer A network-attached storage (NAS) device. nim_script An internally managed NIM resource that is used to indicate that NIM must run a script as a part of a NIM operation. paging Parent directory for the paging files of the client. root Parent directory for client / (root) directories. resolv_conf Name server configuration file. savevg A savevg image. savewpar Workload partition backup image. script Executable file that is run on a client. secattrs Security attributes file for workload partitions.

Item

Description

-t Type

Specifies the type of the NIM object for define operations. The possible types are:

resource types:

adapter_def: Directory containing secondary adapter definition files.
boot: An internally managed NIM resource that is used to indicate that a boot image is allocated to a client.
bosinst_data: Configure file that is used during base system installation.
devexports: Device exports the file for workload partitions.
dump: Parent directory for client dump files.
exclude_files: Contains files to be excluded from a mksysb image.
fb_script: Executable script that is run during the first reboot of a machine.
fix_bundle: Fix (keyword) input file for the cust or fix_query operation.
home: Parent directory for client /home directories.
image_data: Configure file that is used during base system installation.
installp_bundle: Installp bundle file.
ios_mksysb: Represents a backup image that is taken from a VIOS management server that is of the vios or ivm type.
linux_source: Represents the Linux installation media.
log: Captures log data during a network installation.
lpp_source: Source device for optional product images.

-t Type (Continued)

mksysb: mksysb image.
nas_filer: A network-attached storage (NAS) device.
nim_script: An internally managed NIM resource that is used to indicate that NIM must run a script as a part of a NIM operation.
paging: Parent directory for the paging files of the client.
root: Parent directory for client / (root) directories.
resolv_conf: Name server configuration file.
savevg: A savevg image.
savewpar: Workload partition backup image.
script: Executable file that is run on a client.
secattrs: Security attributes file for workload partitions.

Item	Description
-t Type (Continued)	Specifies the type of the NIM object for define operations. The possible types are: shared_home /home directory that is shared by clients. shared_root / (root) directory that is shared by clients spot Shared Product Object Tree (SPOT) - equivalent to /usr file system. tmp Parent directory for client /tmp directories. vg_data Configuration file that is used during volume group restoration. wpar_spec Specification file for creating workload partitions. machine types: alternate_master A system that is reserved as a backup in case the primary NIM master ceases to function properly. diskless All file systems and resources remote. dataless Local paging, dump; remote /,/usr; others remote or local. standalone Local file systems and resources. master System that controls the NIM environment. wpar Workload partition hosted by the managing system.
-t Type (Continued)	management types: bcmm A blade management module hardware. cec A central electronic complex hardware. hmc A Hardware Management Console system. ivm An integrated virtual management system. vios A Virtual I/O Server. network types: tok Token-Ring network. ent Ethernet network. fddi FDDI network. atm ATM network. generic Other TCP/IP networks. hfi Host Fabric Interface (HFI) network. group types: mac_group Group of machines. res_group Group of resources.

Item

Description

-t Type (Continued)

Specifies the type of the NIM object for define operations. The possible types are:

shared_home: /home directory that is shared by clients.
shared_root: / (root) directory that is shared by clients
spot: Shared Product Object Tree (SPOT) - equivalent to /usr file system.
tmp: Parent directory for client /tmp directories.
vg_data: Configuration file that is used during volume group restoration.
wpar_spec: Specification file for creating workload partitions.

machine types:

alternate_master: A system that is reserved as a backup in case the primary NIM master ceases to function properly.
diskless: All file systems and resources remote.
dataless: Local paging, dump; remote /,/usr; others remote or local.
standalone: Local file systems and resources.
master: System that controls the NIM environment.
wpar: Workload partition hosted by the managing system.

-t Type (Continued)

management types:

bcmm: A blade management module hardware.
cec: A central electronic complex hardware.
hmc: A Hardware Management Console system.
ivm: An integrated virtual management system.
vios: A Virtual I/O Server.

network types:

tok: Token-Ring network.
ent: Ethernet network.
fddi: FDDI network.
atm: ATM network.
generic: Other TCP/IP networks.
hfi: Host Fabric Interface (HFI) network.

group types:

mac_group: Group of machines.
res_group: Group of resources.

Security

Access Control: You must have root authority to run the nim command.

Attention RBAC users and Trusted AIX users: This command can perform privileged operations. Only privileged users can run privileged operations. For more information about authorizations and privileges, see Privileged Command Database in Security. For a list of privileges and the authorizations that are associated with this command, see the lssecattr command or the getcmdattr subcommand.

Examples

The following examples are grouped by operation.

activate

To start the managed wpar1 workload partition, type:
```
nim -o activate wpar1
```
To start the managed wpar1 workload partition with additional startwpar command flags with verbose output, type:
```
nim -o activate -a cmd_flags="-v" wpar1
```

allocate

To allocate resources to a diskless workstation with the name syzygy and SPOT attribute value of spot1, type:
```
nim -o allocate -a spot=spot1 syzygy
```
To perform a base system installation on the system that is named krakatoa, resources must be allocated initially by entering:
```
nim -o allocate -a spot=myspot -a lpp_source=images krakatoa
```
The NIM environment can be initialized to support the installation by performing the bos_inst operation, type:
```
nim -o bos_inst krakatoa
```
To install the software product, adt, into a standalone system,stand1, given that the installable option, adt, in the lpp_source, images, type:
```
nim -o allocate -a lpp_source=images stand1
```
Then type:
```
nim -o cust -a filesets="adt" stand1
```
To install software products into a standalone system, stand1, such that the image for the installable option, adt, in the lpp_source, images, and the installp_bundle, bundle1, contains the name of the installable option, type:
```
nim -o allocate -a lpp_source=images \
-a installp_bundle=bundle1 stand1
```
Then type:
```
nim -o cust stand1
```
To automatically configure a machine with name resolution services after a BOS installation, create the /exports/resolv.conf file, with contents similar to the following:
```
nameserver      129.35.143.253
nameserver      9.3.199.2
domain          austin.ibm.com
```
then type:
```
nim -o define -t resolv_conf -a location=/exports/resolv.conf \
-a server=master rconf1
```
Prior to issuing the bos_inst operation, allocate this resource with other required and optional resources by typing:
```
nim -o allocate -a spot=spot1 -a lpp_source=images1 \
-a bosinst_data=bid1 -a resolv_conf=rconf1 client1
```
To allocate all resources applicable to standalone machines from the NIM resource group res_grp1, to the machine mac1, type:
```
nim -o allocate -a group=res_grp1 mac1
```

alt_disk_install

To install a mksysb resource all_devices_mysysb to client roundrock, on hdisk4 and hdisk5, using the image_data resource image_data_shrink, with debug turned on, type:
```
nim -o alt_disk_install -a source=mksysb\
-a image_data=image_data_shrink\
-a debug=yes\
-a disk='hdisk4 hdisk5' roundrock
```
To clone a rootvg on client austin to hdisk2, but only run phase1 and phase2 (leaving the /alt_inst file systems mounted), type:
```
nim -o alt_disk_install -a source=rootvg\
-a disk='hdisk2'\
-a phase=12 austin
```

bos_inst

To install the machine blowfish, using the resources spot1, images1, bosinst_data1, and rconf1, first allocate the resources by typing:
```
nim -o allocate -a spot=spot1 -a lpp_source=images1 \
-a bosinst_data=bosinst_data1 -a resolv_conf=rconf1 blowfish
```
Then, perform the BOS installation by typing:
```
nim -o bos_inst blowfish
```
To install the machine blowfish while allocating the resources spot1, images1, bosinst_data1, and rconf1 automatically when the bos_inst operation starts, type:
```
nim -o bos_inst -a spot=spot1 -a lpp_source=images1 \
-a bosinst_data=bosinst_data1 -a resolv_conf=rconf1 blowfish
```
To use the default resources when installing the machine mac1, type:
```
nim -o bos_inst mac1
```
To install a machine, deadfish, with spot1 and lpp_source1 and use an adapter_def resource, adapter_def1, to configure secondary adapters, type:
```
  nim -o bos_inst -a spot=spot1 -a lpp_source=lpp_source1 \
  -a adapter_def=adapter_def1 deadfish
```

To install the machine blowfish and accept software license agreements, type:

nim -o bos_inst -a spot=spot1 -a lpp_source=images1 \
-a accept_licenses=yes -a resolv_conf=rconf1 blowfish

change

Machines on the BLDG905 network use the gateway905 gateway to reach the OZ network. Machines on the OZ network use the gatewayOZ gateway to reach the BLDG905 network. To add a route between two networks named BLDG905 and OZ, type:
```
nim -o change -a routing1="OZ gateway905 gatewayOZ" BLDG905
```
The adapter that is identified by the host name sailfish2.austin.ibm.com is attached to a token ring network. To define a secondary interface for this adapter on the NIM master and instructing NIM to locate the NIM network representing the attached ethernet network and, if not found, have NIM define a NIM network with subnetmask 255.255.255.128, type:
```
nim -o change -a if2="find_net sailfish2.austin.ibm.com 0" \
-a net_definition="tok 255.255.255.128" -a ring_speed2=16 master
```
Note: A default name is generated for the network, and no routing information is specified for the new network.
To define default routes for the networks net1 and net2 that use default gateways gw1 and gw2 respectively, type the following two commands:
```
nim -o change -a routing1="default gw1" net1
nim -o change -a routing1="default gw2" net2
```
To designate the resources that are defined by the resource group res_grp1 as the set of resources that are always allocated by default during any operation in which these resources are applicable, type:
```
nim -o change -a default_res=res_grp1 master
```

check

To have NIM check on the usability of a SPOT named myspot, type:
```
nim -o check myspot
```
To check the status of an lpp_source named images, type:
```
nim -o check images
```

chwpar

To add rset rs/cpus23 to the resource control attributes for the wpar1 workload partition, type:

nim -o chwpar -a cmd_flags="-R rset=rs/cpu23" wpar1

create

To create the wpar1 workload partition with host name and specification file resource basic_wpar, type:
```
nim -o create -a wpar_spec=basic_wpar wpar1
```
To create the wpar1 workload partition with the wpar-specification file resource wpar1_spec, type:
```
nim -o create -a wpar_spec=wpar1_spec wpar1
```
To create the wpar1 workload partition from the savewpar backup image resource wpar1_backup, type:
```
nim -o create -a savewpar=wpar_backup wpar1
```

cust

To install a software product into a spot, spot1, such that the image for the installable option,adt, resides in the lpp_source, images, type:
```
nim -o cust -a lpp_source=images -a filesets=adt spot1
```
To install a software product into a spot, spot1, such that the image for the installable option,adt, resides in the lpp_source,images, and the installp_bundle, bundle1, contains the name of the installable option, type:
```
nim -o cust -a lpp_source=images -a installp_bundle=bundle1 spot1
```
To install a software product into a spot, spot1, such that the image for the installable option,adt, resides on a tape that is in the tape drive that is local to the machine where the spot resides, type:
```
nim -o cust -a lpp_source=/dev/rmt0 -a filesets=adt spot1
```
To install a software product into a spot, spot1, such that the image for the installable option, adt, resides on a tape that is in the tape drive that is local to the machine where the spot resides, type:
```
nim -o cust -a lpp_source=/dev/rmt0 -a filesets=adt spot1
```
To install all fileset updates associated with APAR IX12345, residing on the tape /dev/rmt0 into spot1 and any diskless or dataless clients to which spot1 is currently allocated, type:
```
nim -F -o cust -afixes=IX12345 -a lpp_source=/dev/rmt0 spot1
```
To update all software installed on the client Standalone1, with the latest updates in the lpp_source named updt_images, type:
```
nim -o allocate -a lpp_source=updt_images Standalone1
nim -o cust -afixes=update_all Standalone1
```
To install the machine catfish with the contents of the installp_bundle bundle1, first allocate the resources by typing:
```
nim -o allocate -a installp_bundle=bundle1 \
-a lpp_source=images1 catfish
```
Then, perform the cust operation by typing:
```
nim -o cust catfish
```
To update all software that is installed on the client Standalone1, with the latest updates in the lpp_source named updt_images, type:
```
nim -o cust -a lpp_source=updt_images -a fixes=update_all \
Standalone1
```
To install the machine catfish with the contents of the installp_bundle bundle1, while allocating this resource and the lpp_source images1 when the cust operation runs, type:
```
nim -o cust -a installp_bundle=bundle1 -a lpp_source=images1 \
catfish
```
To configure secondary adapters on a client machine, deadfish, by using the secondary adapter configuration file in the adaper_def resource, adapter_def1, type:
```
  nim -o cust -a adapter_def=adapter_def1 deadfish
```

deactivate

To stop the managed wpar1 workload partition, type:
```
nim -o deactivate wpar1
```
To force the stop of the managed wpar1 workload partition, type:
```
nim -Fo deactivate wpar1
```
To stop the managed wpar1 workload partition with more stopwpar command flags to halt after 85 seconds, type:
```
nim -o deactivate -a cmd_flags="-t 85" wpar1
```

deallocate

To deallocate an lpp_source named images from the standalone machine client1, type:
nim -o deallocate -a lpp_source=images client1

define

To define a resource that is a directory that contains installable images that is on the server altoid and has a path name of /usr/sys/inst.images, and name that resource images, type:
```
nim -o define -t lpp_source -a server=altoid \
-a location=/usr/sys/inst.images images
```
To create a new SPOT resource named myspot on the NIM master in the /export/exec directory, by using an lpp_source named image, type:
```
nim -o define -t spot -a server=master -a location=/export/exec \
-a source=images myspot
```
To define a network object named BLDG905, with a subnetmask of 255.255.240.0 and an address of 129.35.129.0, type:
```
nim -o define -t tok -a snm=255.255.240.0 \
-a net_addr=129.35.129.0 BLDG905
```
To define an lpp_source, lppsrc1, that is on the master from a tape by selecting a specific set of software products that are on the tape, bos.INed and bos.adt, type:
```
nim -o define -t lpp_source -a location=/images2/lppsrc1 \
-a source=/dev/rmt0 -a server=master -a packages="bos.INed \
bos.adt" lppsrc1
```
To define a mksysb resource, mksysb1, from an existing mksysb image that is located in /resources/mksysb.image on the master, type:
```
nim -o define -t mksysb -a server=master \
-a location=/resources/mksysb.image mksysb1
```
To define a NIM network named ATMnet with a subnet mask of 255.255.240 and an address of 129.35.101.0 to represent an ATM network, use the generic network type as follows:
```
nim -o define -t generic -a snm=255.255.240.0 \
-a net.addr=129.35.101.0 ATMnet
```
To define a machine group named DisklsMacs1 with members that are NIM diskless machines named diskls1, diskls2, and diskls3, type:
```
nim -o define -t mac_group -a add_member=diskls1 \
-a add_member=diskls2 -a add_member=diskls3 DisklsMacs1
```

To define a resource group named DisklsRes1 with resources spot1, root1, dump1, paging1, home1, tmp1, type:

nim -o define -t res_group -a spot=spot1 -a root=root1 \
-a dump=dump1 -a paging=paging1 -a home=home1 -a tmp=tmp1 \
DisklsRes1

To display the space that is required to define a mksysb resource, mksysb2, and create a mksysb image of the client, client1, during the resource definition where the image is located in /resources/mksysb.image on the master, type:
Note: This action shows the space that is required for the operation, mksysb, or resource creation does NOT take place.
```
nim -o define -t mksysb -a server=master \
-a location=/resources/mksysb.image -a source=client1 \
-a mk_image=yes -a size_preview=yes mksysb2
```
To define a mksysb resource, mksysb2, and create the mksysb image of the client, client1, during the resource definition where the image is in /resources/mksysb.image on the master, type:
```
nim -o define -t mksysb -a server=master \
-a location=/resources/mksysb.image -a source=client1 \
-a mk_image=yes mksysb2 
```
To define a mksysb resource, mksysb2, and create a mksysb image of the client, client1, during the resource definition where the mksysb flags used to create the image are -em, and the image is in /resources/mksysb.image on the master, type:
```
nim -o define -t mksysb -a server=master \
-a location=/resources/mksysb.image -a source=client1 \
-a mk_image=yes -a mksysb_flags=em mksysb2
```
To define an exclude_files resource, exclude_file1, located in /resources/mksysb.image on the master, type:
```
nim -o define -t exclude_files -a server=master \
-a location=/resources/exclude_file1 exclude_file1
```
A machine that is called redfish, hostname redfish_t.lab.austin.ibm.com, has its primary interface that is attached to a token-ring network with ring speed of 16 Megabits. To define redfish as a standalone machine in the NIM environment and instructing NIM to locate the name of the network that the machine's primary interface is attached, type:
```
nim -o define -t standalone  -a if1="find_net \
redfish_t.lab.austin.ibm.com 0" -a ring_speed1=16 redfish
```
A machine that is called bluefish, hostname is bluefish_e.lab.austin.ibm.com, has its primary interface that is attached to an ethernet network with cable_type of bnc. To define bluefish as a diskless machine in the NIM environment and instructing NIM to locate the name of the network that the machine's primary interface is attached, and if not found, have NIM define a NIM network with the name ent_net, subnetmask of 255.255.255.128 and default route by using the gateway with hostname lab_gate, type:
```
nim -o define -t diskless -a if1="find_net \
bluefish_e.lab.austin.ibm.com 0" -a net_definition="ent \
255.255.255.128 lab_gate 0 ent_net" -a cable_type=bnc bluefish
```
Note: Specify 0 in place of the master gateway in the net_definition attribute if a default route for the master exists, otherwise you must specify the master gateway.
To define the /export/nim/adapters directory as an adapter_def resource, adapter_def1, on the master, type:
```
  nim -o define -t adapter_def -a server=master \
  -a location=/export/nim/adapters adapter_def1
```
To populate the adapter_def resource with secondary adapter configuration files, run the nimadapters command.
To display the space that is required to define a savevg resource, savevg2, and create a savevg image of the client, client1, during the resource definition where the image is in /export/nim/savevg on the master and the volume_group to to backup is myvg, type:
```
nim -o define -t savevg -a server=master \
  -a location=/export/nim/savevg/savevg2 -a source=client1 \
  -a mk_image=yes -a size_preview=yes -a volume_group=myvg savevg2
```
Note: This action shows the space that is required for the operation. savevg or resource creation does not take place.
To define a savevg resource, savevg2, and create the savevg image of the client, client1, during the resource definition where the image is in /export/nim/savevg on the master and the volume_group to backup is myvg, type:
```
nim -o define -t savevg -a server=master \
-a location=/export/nim/savevg -a source=client1 \
-a mk_image=yes -a volume_group=myvg savevg2
```
To define a savevg resource, savevg2, and create a savevg image of the client, client1, during the resource definition where the savevg flags used to create the image are -em, and the image is in /export/nim/savevg on the master, type:
```
nim -o define -t savevg -a server=master \
-a location=/export/nim/savevg -a source=client1 \
-a mk_image=yes -a volume_group=myvg -a savevg_flags=em savevg2
```

To define a vg_data resource, my_vg_data, on the master at the location /export/nim, type:

nim -o define -t vg_data -a server=master -a location=/export/nim/my_vg_data my_vg_data

To define the wpar1 workload partition that is managed by the yogi managing standalone machine with wpar1 as both the host name and the name of the workload partition on the managing system, type:
```
nim -o define -t wpar -a mgmt_profile1="yogi wpar1" -a if1="find_net wpar1 0" wpar1
```

To define a savewpar resource named wpar1backup and create the savewpar image of the yogi workload partition on the sterling server, type:

nim -o define -t savewpar \
   -a server=sterling -a location=/resources/wpar1.image \
   -a source=wpar1 -a mk_image=yes wpar1backup

To define a savewpar resource named wpar1backup and create the savewpar image of the yogi workload partition on the sterling server, excluding file patterns in the exclude_files resource wparexclude, and passing the flag to the savewpar resource to exclude files and creates a image.data file, type:
```
nim -o define -t savewpar \
   -a server=sterling -a location=/resources/wpar1.image -a source=wpar1 \
   -a exclude_files=wparexclude -a cmd_flags="-ei" mk_image=yes wpar1backup
```
To define a ios_mksysb resource such as ios_mksysb1, and create the ios_mksysb image of the vios client as vios1, during the resource definition where the image is located in /export/nim/ios_mksysb on the master, type:
```
nim -o define -t ios_mksysb -a server=master \
-a location=/export/nim/ios_mksysb -a source=vios1 \
-a mk_image=yes ios_mksysb1
```

destroy

To remove the managed wpar1 workload partition from its managing system, type:
```
nim -o destroy wpar1
```
To force the removal of the managed wpar1 workload partition, type:
```
nim -Fo destroy wpar1
```

dkls_init

To initialize the environment for a diskless workstation with the name of syzygy, by using the resources spot1, root1, dump1, and paging1, you must allocate the resources by typing:
```
nim -o allocate -a spot=spot1 -a root=root1 -a dump=dump1 \
-a paging=paging1 syzygy
```
Then initialize the resources for the client machine by typing:
```
nim -o dkls_init syzygy
```
To initialize the environment for a diskless workstation with the name of syzygy, type:
```
nim -o dkls_init syzygy
```
To exclude the member named diskls2 from operations on the machine group DisklsMacs1, and then initialize the remaining members while allocating the diskless resources defined by the resource group named DisklsRes1, type the following two commands:
```
nim -o select -a exclude=diskls2 DisklsMacs1
nim -o dkls_init -a group=DisklsRes1 DisklsMacs1
```
To initialize the group of diskless machines that are defined by the machine group dtgrp1, while allocating the required and optional resources defined by the resource group dk_resgrp1, when the dkls_init operation runs, type:
```
nim -o dkls_init -a group=dtgrp1 dk_resgrp1
```

dtls_init

To initialize the environment for a dataless workstation with the name of syzygy, using the resources spot1, root1, and dump1, first allocate the resources by typing:
```
nim -o allocate -a spot=spot1 -a root=root1 -a dump=dump1 syzygy
```
Then initialize the resources for the client machine by typing:
```
nim -o dtls_init syzygy
```
To initialize the environment for a dataless workstation with the name of syzygy, type:
```
nim -o dtls_init syzygy
```
To exclude the member named dataless1 from operations on the machine group DatalsMacs1, and then initialize the remaining members while allocating the dataless resources defined by the resource group named DatalsRes1, type the following two commands:
```
nim -o select -a exclude=datals2 DatalsMacs1
nim -o dtls_init -a group=DatalsMacs1 DatalsRes1
```
To initialize the group of dataless machines defined by the machine group DatalsMacs1, while allocating the required and optional resources defined by the resource group DatalsRes1, when the dtls_init operation runs, type:
```
nim -o dtls_init -a group=DatalsMacs1 DatalsRes1
```

fix_query

To list information about fixes installed on client Standalone1 for 20 APAR numbers, create the file /tmp/apar.list with one APAR number per line, as shown:
IX123435
IX54321
IX99999
...
then type:
nim -o define -t fix_bundle -alocation=/tmp/apar.list \
                 -aserver=master fix_bun
nim -o allocate -a fix_bundle=fix_bun Standalone1
nim -o fix_query Standalone1

lppchk

To check fileset version and requisite consistency on the SPOT spot1, type:
```
nim -o lppchk spot1
```
To verify the file checksums for all packages beginning with the name bos on NIM targets in the group of standalone machines macgrp1, and displaying detailed error information and updating the software database to match the actual file checksum when inconsistencies are found, type:
```
nim -o lppchk -a lppchk_flags='-c -m3 -u' \
-a filesets='bos*' macgrp1
```
Because the lppchk operation runs in the background on group members by default, to view the output from the lppchk operation type:
```
nim -o showlog -a log_type=lppchk macgrp1
```

lppmgr

To list the names of duplicate base level filesets which should be removed from lpp_source1 with space usage information, type:
```
nim -o lppmgr -a lppmgr_flags="-lsb" lpp_source1
```
To remove duplicate base and update filesets and superseded updates from lpp_source1, type:
```
nim -o lppmgr -a lppmgr_flags="-rbux" lpp_source1
```
To remove all non-SIMAGES (filesets that are not required for a bos install) from lpp_source1, type:
```
nim -o lppmgr -a lppmgr_flags="-rX" lpp_source1
```
To remove all language support except 'C' from lpp_source1, type:
```
nim -o lppmgr -a lppmgr_flags="-r -k C" lpp_source1
```

lswpar

To list the characteristics of the managed wpar1 workload partition, type:
```
nim -o lswpar wpar1
```
To list the network characteristics of the managed wpar1 workload partition, type:
```
nim -o lswpar -a cmd_flags="-N" wpar1
```
To list the general characteristics of the workload partitions managed by the global1 standalone system, type:
```
nim -o lswpar -a cmd_flags="-G" global1
```

maint

To uninstall the software products bos.INed and adt from a spot, spot1, type:
```
nim -o maint -a installp_flags="-u" \
-a filesets="bos.INed adt" spot1
```
To uninstall the options bos.INed and adt from a spot, spot1, such that the installp_bundle, bundle2, contains the names of the installable options, type:
```
nim -o maint -a installp_flags="-u" \
-a installp_bundle=bundle2 spot1
```
To cleanup from an interrupted software installation on a spot, spot1, type:
```
nim -o maint -a installp_flags="-C" spot1
```
From the master, to uninstall the software products bos.INed and adt from a standalone machine, stand1, type:
```
nim -o maint -a installp_flags="-u" \
-a filesets="bos.INed adt" stand1
```
From the master, to clean up from an interrupted software installation on a standalone machine, stand1, type:
```
nim -o maint -a installp_flags="-C" stand1
```
From the master, to uninstall the software products bos.INed and adt from a standalone machine, stand1, such that installp_bundle, bundle2, contains the names of the installable options, type:
```
nim -o maint -a installp_flags="-u" \
-a installp_bundle=bundle2 stand1
```

maint_boot

To enable the NIM standalone client, stand1, to boot in maintenance mode, type:
nim -o maint_boot stand1
This sets up the maintenance boot operation, but you must initiate the network boot locally from stand1.

remove

To remove a resource named dump_files, type:
nim -o remove dump_files

showlog

To view the boot logs of the machines that are defined by the group DisklsMacs1, type:
nim -o showlog -a log_type=boot DisklsMacs1

showres

To show the contents of the configure script1 script , type:
```
nim -o showres script1
```
To show the contents of the bosinst.data resource bosinst_data1, type:
```
nim -o showres bosinst_data1
```
To list all the filesets in the lpp_source lpp_source1, type:
```
nim -o showres lpp_source1
```
To list all the filesets in the lpp_source lpp_source1 relative to what is installed on the machine machine1, type:
```
nim -o showres -a reference=machine1 lpp_source1
```
To list user instructions for the bos.INed and xlC.rte filesets on the lpp_source lpp_source1, type:
```
nim -o showres -a filesets="bos.INed xlC.rte" \
-a installp_flags="qi" lpp_source1
```
To list all the problems that are fixed by software on the lpp_source lpp_source1, use:
```
nim -o showres -a instfix_flags="T" lpp_source1
```
To show the contents of the secondary adapter configuration file in the adapter_def resource, adapter_def1, for client, deadfish, type:
```
nim -o showres -a client=deadfish adapter_def1
```
To show the contents of every secondary adapter configuration file in the adapter_def resource, adapter_def1, type:
```
nim -o showres adapter_def1
```
To show the contents of the savevg resource, savevg1, type:
```
nim -o showres savevg1
```

syncwpar

To synchronize the software of the managed wpar1 workload partition with its managing system, type:
```
nim -o syncwpar wpar1
```
To synchronize the software of all the workload partitions managed by the global1 standalone system, type:
```
nim -o syncwpar -a cmd_flags="-A" global1
```

update

To add all the filesets on /dev/cd0 to lpp_source1, type:

nim -o update -a packages=all -a source=/dev/cd0 lpp_source1

To add the bos.games 7.1.0.0 and bos.terminfo filesets to lpp_source1, type:

nim -o update -a packages="bos.games 7.1.0.0 bos.terminfo" \
  -a source=/dev/cd0 lpp_source1

To remove bos.games from lpp_source1, type:

nim -o update -a rm_images=yes -a packages="bos.games" lpp_source1

To recover the missing SIMAGES for lpp_source1 from the AIX Installation CD, type:
```
nim -o update -a recover=yes -a source=/dev/cd0 lpp_source1
```

updatios

To install fixes or to update VIOS with the vioserver1 NIM object name to the latest maintenance level, type:
```
nim -o updateios -a lpp_source=lpp_source1 -a preview=no vioserver1
```
The updates are stored in lpp_source and lpp_source1 files.
Note: The updateios operation runs a preview during installation. Running the updateios operation from NIM runs a preview unless the preview flag is set to no. During the installation, you must run a preview when you use the updateios operation with updatios_flags=-install. With the preview, you can check whether the preview installation is running accurately before you proceed with the VIOS update.
To reject fixes for a VIOS with the vioserver1 NIM object name, type:
```
nim -o updateios -a updateios_flags=-reject vioserver1
```
To clean up partially installed updates for a VIOS with the vioserver1 NIM object name, type:
```
nim -o updateios -a updateios_flags=-cleanup vioserver1
```
To commit updates for a VIOS with the vioserver1 NIM object name, type:
```
nim -o updateios -a updateios_flags=-commit vioserver1
```
To remove a specific update such as update1 for a VIOS with the vioserver1 NIM object name, type:
```
nim -o updateios -a updateios_flags=-remove-a filesets="update1" vioserver1
```
To remove updates for a VIOS with the vioserver1 NIM object name by using an installp_bundle bundle1, where bundle1 contains the updates to be removed, type:
```
nim -o updateios -a updateios_flags=remove -a installp_bundle=bundle1 vioserver1
```

Files

Item	Description
/etc/niminfo	Contains variables that are used by NIM.