SAS RAID cards
Find information about the SAS RAID cards that are installed in the system. Also, find information about the SAS RAID controllers that are supported in the system.
Table 1 provides
information about the SAS RAID cards that are supported for an 8247-42L, 8286-41A, or 8286-42A system.
| Feature Code (FC) | Description | Function |
|---|---|---|
| FC EJ0N (CCIN 57D7) | one SAS RAID Controller card | Provides just a bunch of disks (JBOD) or in SAS RAID 0, 5, 6, and 10, functions for the attached disk drives in the base function 8247-42L, 8286-41A, or 8286-42A system. |
| FC EJ0S (CCIN 57D7) | Split Disk - two SAS RAID Controller cards | FC EJ0S can be used to split the disk backplane into two sets of six disks. Provides JBOD or in SAS RAID 0, 5, 6, and 10, functions for the attached disk drives in the base function 8286-41A or 8286-42A system. |
| FC EJ0P (CCIN 57D8) | Dual high performance SAS RAID Controller cards | FC EJ0P is used with the expanded function disk backplane to support up to
18 small form-factor disk drives or solid-state drives and up to 8 1.8 inch form-factor solid state
drives. Provides SAS RAID 0, 5, 6, 10, 5T2, 6T2, and 10T2 functions depending on the Operating
System support for the attached disk drives in the expanded function
8286-41A or 8286-42A system. Provides two external SAS
ports that can be used to connect one external FC 5887. Note: The SAS YO cable that is used to
attach a FC 5887 disk drive enclosure to the rear
SAS ports of system models 8286-41A or 8286-42A must not exceed the maximum supported length of 3
meters.
|
| FC EJ0L (CCIN 57CE) | PCIe3 12 GB Cache RAID SAS quad-port 6 Gb Adapter | The SAS RAID controller can be used to connect to an external FC 5887. |
| FC EJ0J (CCIN 57B4) | PCIe3 RAID SAS quad-port 6 Gb Adapter | The SAS RAID controller can be used to connect to an external FC 5887. |
| FC 5805 | PCIe 380 MB Cache Dual - x4 3 Gb SAS RAID adapter | The SAS RAID controller can be used to connect to an external FC 5887. |
| FC 5901 | PCIe Dual x4 SAS adapter | The SAS RAID controller can be used to connect to an external FC 5887. |
| FC ESA3 (CCIN 57BB) | PCIe2 1.8 GB Cache RAID SAS Adapter Tri-port 6Gb | The SAS RAID controller can be used to connect to an external FC 5887. |
For more
information about the SAS RAID controllers, see the following topics:
