Subscribe to this information
POWER7 information
USB_CBL
The USB cable or the USB connection between the I/O adapter (IOA) and the device might be failing.
Complete the following steps:
- Is a location code available in the serviceable event view for
this field-replaceable unit (FRU)?
- Yes:
- Determine the location of the port by removing -Lx from the location code. Replace any USB cables or extension cables at the port location. If there are no USB cables or extension cables, replace any hardware that connects the IOA to the device. For more information, see Part locations and location codes. Select your machine type and model number to find additional location codes, part numbers, or replacement procedures for your system. This ends the procedure.
- No:
- Continue with the next step.
- Use the USB_DEV symbolic FRU to determine the location of the USB port that the external USB docking station is attached to. Replace any USB cables or extension cables at the port location. If there are no USB cables or extension cables, replace any hardware that connects the IOA to the device. For more information, see Part locations and location codes. Select your machine type and model number to find additional location codes, part numbers, or replacement procedures for your system. This ends the procedure.
