Overview of managing adapters for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S system
Find information about using and managing adapters.
The following features are electromagnetic compatibility (EMC) Class B
features. See the Class B Notices in the
Hardware Notices section.
| Feature | Description |
|---|---|
| 5269 | POWER® GXT145 PCI Express Graphics Accelerator |
The adapter information that is shown here is used during non-directed service
activities. The information can be used to:
- Identify an adapter
- Find specific technical information about an adapter
- Where applicable, show special installation or cabling instructions
- Show signal names for the output-pins of the adapter connectors
- Where applicable, show the settings for switches or jumpers
Adapters can be identified by their feature code (FC) or their custom-card identification number (CCIN). Normally, the CCIN number is labeled on the adapter. The field replaceable unit (FRU) part number (P/N) of your adapter might not match the FRU P/N listed in this information. If the part numbers do not match, verify that the CCIN is the same. If the CCIN is same, the adapter has the same function and can be used in the same way.
Adapters must be placed in specific slots to function correctly or optimally.